Game Input MultipleXer

Hi,

Using gimx-config, you have to make a configuration for controllers 1, 2 and 3.

http://gimx.fr/wiki/index.php?title=Con ... ontrollers

The address of the DS3 controller itself can't be changed.
The address of the PS3 that is stored in the DS3 controller memory can be changed.
There's a tool that can do it, it's called sixpair.
It can be found at http://www.pabr.org/sixlinux/sixlinux.en.html

Which blog?

The cheapest ebay one works. It costs 1.50$.

http://www.ebay.fr/sch/i.html?_sacat=0& ... =2&_sop=15

Hi, Do you own a G25/G27? I can try to make a firmware without owning the hardware, but I'll need the full USB descriptors for this. This can easily be done in Linux: http://www.slashdev.ca/2010/05/08/get-usb-report-descriptor-with-linux/ I'm not sure I'll have enough time to add FFB support. It see...

Hi,

1) Any standard HID controller should work.

2) GIMX can do that, but there is no FF support yet.

3) No. I could add this functionality, but I need to have a G25/G27 for this.

Hi, The Teensy 3.0/3.1 are not compatible because they use very different chips. There is no latency difference between the Teensy 2.0 and the Teensy++ 2.0 (mainly because they run at the same frequency). GIMX should be able to talk to a PS2 using a Teensy 2.0 (there may be issues as it was not deep...

You can use the driving/flying mode for the mouse in a third profile.
You can look at the third profile in the PS3_FarCry3.xml configuration.

http://www.linuxmint.com/download.php

http://www.linuxmint.com/documentation.php

More details please: http://gimx.fr/forum/viewtopic.php?f=5&t=691

There is need to set the dongle address again if the change is permanent.
Make sure your real controller (the one you are using the address) is turned off.