G25 not detected Linux

[crazyrobinhood]

global option -l with value `log.txt'
global option -c with value `LogitechG25_29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.8 i386
Ubuntu 14.04.4 LTS
Linux 4.2.0-42-generic #49~14.04.1-Ubuntu SMP Wed Jun 29 20:22:18 UTC 2016 i686
Bus 001 Device 005: ID 10f1:1a08 Importek Internal Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 13d3:3249 IMC Networks Internal Bluetooth
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 037: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 002 Device 036: ID 046d:c299 Logitech, Inc. G25 Racing Wheel
Bus 002 Device 030: ID 054c:05c4 Sony Corp. DualShock 4
Bus 002 Device 029: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 29, If 0, Class=Hub, Driver=hub/4p, 12M
|__ Port 3: Dev 30, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 36, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 37, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 4: Dev 5, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 5, If 1, Class=Video, Driver=uvcvideo, 480M
native mode is already enabled for HID device 02:01:04 (PID=c299)
can't read packet header
No controller detected.
adapter_detect failed





that's the log generated after GIMX stopped in less then 5 seconds.
Any sugestions?
tahnk vyou in advance

[Matlo]

Check the wiring between the boards.
Try swapping Rx and Tx.

[crazyrobinhood]

Thank you Matlo,
I tried that but still same error...

Any other ideas?
COuld be USB hud?

EDIT:..... SOLVED....
I had to unplug the usb cable and re plug it.