Raspberry pi zero W with gimx

Discuss everything to do with GIMX here
Post Reply
ghecko78
Posts: 3
Joined: Wed Aug 09, 2017 10:09 pm

Raspberry pi zero W with gimx

Post by ghecko78 » Wed Aug 09, 2017 10:15 pm

Hello all :)

I want to use my raspberry pi zero W with gimx on my ps4,
It was possible to use a xbox one controller bluetooth connected with the raspberry pi and the raspberry pi connected on the ps4 on the usb OTG in serial mode?
Now, the output like this :
sudo /usr/bin/gimx -p /dev/ttyGS0 -c Dualshock4.xml --nograb controller #1: option -p with value `/dev/ttyGS0'
now reading arguments for controller #2
global option -c with value `Dualshock4.xml'
grab flag is unset
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
gimx.c:208 main: no adapter detected

the error message no adaptater detected means no controller was found on the raspberry pi, or no ps4 found?

Thank's you in advanced :)

User avatar
Matlo
Posts: 4468
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Raspberry pi zero W with gimx

Post by Matlo » Thu Aug 10, 2017 10:05 pm

Using the OTG port is not supported. The OTG port in serial mode is no way acting like a DS4 controller.
GIMX creator Donate Shop

ghecko78
Posts: 3
Joined: Wed Aug 09, 2017 10:09 pm

Re: Raspberry pi zero W with gimx

Post by ghecko78 » Mon Aug 14, 2017 9:11 am

Hello,

If I used libcomposite?

Thanks you

ghecko78
Posts: 3
Joined: Wed Aug 09, 2017 10:09 pm

Re: Raspberry pi zero W with gimx

Post by ghecko78 » Mon Aug 14, 2017 10:43 pm

It's possible to used a xbox one controller over bluetooth with gimx?
Any config example?
When I launch "gimx -c xboxone.xml --status -h 0 -t DS4" I have no output when a press a key on the xbox one controller.
Thank you in advanced

User avatar
Matlo
Posts: 4468
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Raspberry pi zero W with gimx

Post by Matlo » Tue Aug 15, 2017 8:17 am

Your command misses the PS4 bdaddr, that should be added at the end.
https://gimx.fr/wiki/index.php?title=Co ... th_.2B_PS4

And the Xbox One controller can only be used wired.
GIMX creator Donate Shop

Post Reply