CP2102 3.3 or 5v Jumper?

Discuss everything to do with GIMX here
Locked
Ueba3ba
Posts: 3
Joined: Wed Oct 04, 2017 4:11 pm

CP2102 3.3 or 5v Jumper?

Post by Ueba3ba »

Hi, I have a cp2102 with jumper of 3.3V sits. Have also Teensy 2. Do I have the jumper to 5V?

Image
https://picload.org/view/dgcladrr/img_2 ... 4.jpg.html
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: CP2102 3.3 or 5v Jumper?

Post by Matlo »

Hello,

I moved your topic to the GIMX discussion section.
From the picture you posted I would say it actually does not matter.
The jumper connects the VCCIO pin to either 3.3V or 5V.
You are going to use the GND/TXD/RXD pins, not the VCCIO pin.
GIMX creator
Ueba3ba
Posts: 3
Joined: Wed Oct 04, 2017 4:11 pm

Re: CP2102 3.3 or 5v Jumper?

Post by Ueba3ba »

THX


Close
Locked