Page 1 of 1

CP2102 3.3 or 5v Jumper?

Posted: Sat Oct 07, 2017 9:49 am
by Ueba3ba
Hi, I have a cp2102 with jumper of 3.3V sits. Have also Teensy 2. Do I have the jumper to 5V?

Image
https://picload.org/view/dgcladrr/img_2 ... 4.jpg.html

Re: CP2102 3.3 or 5v Jumper?

Posted: Sun Oct 08, 2017 12:24 pm
by Matlo
Hello,

I moved your topic to the GIMX discussion section.
From the picture you posted I would say it actually does not matter.
The jumper connects the VCCIO pin to either 3.3V or 5V.
You are going to use the GND/TXD/RXD pins, not the VCCIO pin.

Re: CP2102 3.3 or 5v Jumper?

Posted: Sun Oct 08, 2017 12:28 pm
by Ueba3ba
THX


Close