How to connect Arduino

Discuss everything to do with GIMX here
Post Reply
Fox Chpox
Posts: 8
Joined: Tue Sep 04, 2018 3:13 pm

How to connect Arduino

Post by Fox Chpox »

Hello. English is not my native language, Sorry for mistakes. I have Raspberry pi 3b, Arduino Uno atmega328p, ps4 ... can I connect a keyboard, mouse and dualshok to RPi3, RPi3 via TX-RX to RX-TX Arduino (by jumper Reset and ground), Arduino via USB to PS4 ... I know that different voltages, I will put resistors 2 x 1 kOhm from TX arduino and to ground from TX ... in general it is feasible? Thank you in advance
User avatar
kaiba_seto2004
Posts: 553
Joined: Sat Jul 15, 2017 9:15 am

Re: How to connect Arduino

Post by kaiba_seto2004 »

Arduino Uno is not supported (or "not working"), so I think you should try again with Arduino Pro Micro or Arduino Leonardo which used atmega32u4 microchip.
PS4 enthusiast.
Fox Chpox
Posts: 8
Joined: Tue Sep 04, 2018 3:13 pm

Re: How to connect Arduino

Post by Fox Chpox »

:cry: оk, thanks for the hint, I'll look for a micro, or cp2102 ... thought I could use uno as a usb ttl bridge ...
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: How to connect Arduino

Post by Matlo »

The only 100% working chip is atmega32u4.
GIMX creator
Post Reply