Page 2 of 3

Re: mrwhite81 GIMX HUD project

Posted: Wed Oct 10, 2018 5:12 am
by mrwhite81
Matlo wrote:
Tue Oct 09, 2018 8:24 pm
Thanks for the details. I'll see what I can do with this. I'd like to have a single firmware to avoid confusing users.
Np, I also want a single firmware and have some questions about the code.
At glance it i guess it works like this:
Gimx queries the serial port and the firmware replies with a define. It switches the define and sets the values .vid .pid which are made static with values from defines. It then uses this for selecting usb passthru / emu and package the data according to the format/protocol. Is this close to correct, and would you solve autodetecting the .vid .pid aso after the firmware respone and then use a switch, #if or some selector to populate with correct values.
Like:
1. Hey firmware, what are you?
- Firmware: Im 0x9
2. Allrighty then, let's see if I got any of your arms in my pocket. Yah, a left arm version 2 was attached to my left jacketarm. I'll write that on my hand to remember.
3. Hey boss, you want to controll your puppet with this move?
4. Im looking at my note and will format your command using 0x9 which is ConsoleX_PAD pretending it's my left arm version 2 named left jacketarm if your puppet asks who is commanding. (We don't want to expose ourselves).

This was fun writing. 😂

Re: mrwhite81 GIMX HUD project

Posted: Wed Oct 10, 2018 5:47 pm
by mrwhite81
Installed and ready for connecting, tweaking and optimizing!
Image

Re: mrwhite81 GIMX HUD project

Posted: Mon Oct 15, 2018 7:26 am
by mrwhite81
Success. Raspberry Pi Zero w + Arduino Pro Micro
Now I'm working on:
1. Webconfig editor.
2. Switchable firmware loader.
3. Passthru firmware autodetection.
And testing out video input to the pi using a hdmi downscaler -> (input as webcam 320x240).
Image

Re: mrwhite81 GIMX HUD project

Posted: Mon Oct 15, 2018 7:29 am
by mrwhite81
mrwhite81 wrote:
Mon Oct 15, 2018 7:26 am
Success. Raspberry Pi Zero w + Arduino Pro Micro
Now I'm working on:
1. Webconfig editor.
2. Switchable firmware loader.
3. Passthru firmware autodetection.
And testing out video input to the pi using a hdmi downscaler -> (input as webcam 320x240).
Image
And "fixing" the board layout, terrible solder skills, backup battery and designing a 3port USB hub board . 🤗

Re: mrwhite81 GIMX HUD project

Posted: Wed Oct 17, 2018 7:49 am
by mrwhite81
Cleaner assemby + homemade pcb ( zero phat) using a cut library card. Image

Re: mrwhite81 GIMX HUD project

Posted: Thu Dec 06, 2018 7:38 am
by HiJack1
Hello any update about new firmware? If i don't understand wrong he said, can i take new hex file?

Re: mrwhite81 GIMX HUD project

Posted: Thu Dec 06, 2018 5:19 pm
by GoDlike
Firmware is being tested now. Please don't ask for ETA, we'll do that as fast as possible.

Re: mrwhite81 GIMX HUD project

Posted: Sun Dec 09, 2018 11:12 am
by mrwhite81
On request im linking my current wip fork of gimx.
https://github.com/zackemannen81/GRCMW

Features:
1. Autodetect and configure Xbox One controllers.
Tested with Original gamepad v1, Firmware 2015 and elite controller.
2. Allows gamepad disconnection after authenticate process to lower power requirement and free a USB port.
3. A raspberry pi led manager and one button multiple functions deamon.
4. On the fly firmware flasher to change firmware without disconnecting any cables / hardware.

Wip: hdmi OSD, BT-LE beacon + Wifi-direct config UI, Tensorflow / openAI / Dark-net yolo DNN-Aimbot, AI-recoil aim correction.
PCB eagle board design solder-free rbpi zero w + pro micro + buttons + leds connector pcb
.STL box for 3D printing

Re: mrwhite81 GIMX HUD project

Posted: Sun Dec 09, 2018 11:22 am
by mrwhite81
Short on time and money atm so Im thinking about selling my xbox setup. And buy another one when my economy recovers again. Anyone intressted?
Image

Re: mrwhite81 GIMX HUD project

Posted: Sun Dec 09, 2018 11:27 am
by GoDlike
Crap, if you told me that month ago I could. I just bought Xbox One S to make configs for XOne.