Page 1 of 3
Doubts with GIMX
Posted: Thu Dec 27, 2018 3:30 pm
by jabidin
Hello, I have this Wheel, DFP:
I bought the web adapter:
https://blog.gimx.fr/product/gimx-adapter/
Questions::
This tutorial is correct? "spanish"
https://www.youtube.com/watch?v=lxcuPRUaScw
Does the adapter comes without the firmware (EMUDFPPS2 - in my case)?
Tks
Re: Doubts with GIMX
Posted: Thu Dec 27, 2018 7:19 pm
by GoDlike
Adapter comes with different firmware, you need to reflash. Don't use youtube tutorials, they're outdated. We have good guide on wiki here -
https://gimx.fr/wiki/index.php?title=Main_Page
Re: Doubts with GIMX
Posted: Thu Dec 27, 2018 9:36 pm
by Matlo
No need to change firmware if your target is the PS4.
Re: Doubts with GIMX
Posted: Fri Dec 28, 2018 10:07 am
by jabidin
tks , yes is for PS4, but……
https://blog.gimx.fr/product/gimx-adapter/
Important note
The GIMX shop only sells hardware. It is your duty to check that this product will fit your needs. In case of doubt, please consider posting questions before placing any order, in the discussion section of the GIMX forum.
Re: Doubts with GIMX
Posted: Fri Dec 28, 2018 3:11 pm
by Matlo
If you still have questions, feel free to ask.
Re: Doubts with GIMX
Posted: Fri Dec 28, 2018 5:40 pm
by jabidin
It says here that if necessary load the firmware::
https://blog.gimx.fr/product/gimx-adapter/
Important note
The GIMX shop only sells hardware. It is your duty to check that this product will fit your needs. In case of doubt, please consider posting questions before placing any order, in the discussion section of the GIMX forum.
Re: Doubts with GIMX
Posted: Sat Dec 29, 2018 12:33 am
by GoDlike
Adapter comes with PS4 firmware, if you want to load other firmware however it's very easy. Just some buttons and flasher is built in gimx.
Re: Doubts with GIMX
Posted: Sat Dec 29, 2018 1:04 am
by jabidin
GoDlike wrote: ↑Sat Dec 29, 2018 12:33 am
Adapter comes with PS4 firmware, if you want to load other firmware however it's very easy. Just some buttons and flasher is built in gimx.
Tkank my friend
Re: Doubts with GIMX
Posted: Wed Jan 02, 2019 2:22 pm
by jabidin
I got the GMIX adapter, but problems not detected Driving Force Pro, in Raspberry Pi
This picture is not:
This picture Yes with errors:
Re: Doubts with GIMX
Posted: Wed Jan 02, 2019 2:32 pm
by GoDlike
Well im not a linux expert but when I see "insufficient permissions" error I would try to run GIMX with sudo.
Also keep in mind that rPI support is experimental.