Page 1 of 1

failed to read packet header from the GIMX adapter

Posted: Mon Apr 08, 2019 12:23 pm
by marcel_1
Hey guys,
i know i am not the first with that problem but i tried a lot without success.
I want to play on PS4 with Mouse and Keyboard.
I have an Arduino feather 32u4 and used the following USB-Adapter:

https://www.ebay.de/itm/5102-module-USB ... SwWflaMsO4

I flashed the PS4Emu Firmware to the feather Board with the GIMX-Launcher and connected the USB-Adapter to the Board.
The PS4 Controller is conected (off) to my Laptop (running Linux Mint 19.1).
If i try to start the connection i get the error:
failed to read packet header from the GIMX adapter

I tried
TX -> TX, RX -> RX
and
TX -> RX, RX -> TX

both with the same error.

Image
Image
Image

Log:
global option -l with value `log.txt'
global option -c with value `Dualshock4_T300RS_PS4.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 7.12 x86_64
Linux Mint 19.1 Tessa
Linux 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64
Bus 002 Device 005: ID 0bdb:1911 Ericsson Business Mobile Networks BV
Bus 002 Device 021: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 002 Device 003: ID 04fc:05da Sunplus Technology Co., Ltd
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b221 Chicony Electronics Co., Ltd integrated camera
Bus 001 Device 015: ID 054c:05c4 Sony Corp. DualShock 4
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 21, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
|__ Port 4: Dev 5, If 7, Class=CDC Data, Driver=cdc_ncm, 480M
|__ Port 4: Dev 5, If 5, Class=Communications, Driver=cdc_wdm, 480M
|__ Port 4: Dev 5, If 3, Class=Communications, Driver=cdc_acm, 480M
|__ Port 4: Dev 5, If 1, Class=Communications, Driver=cdc_acm, 480M
|__ Port 4: Dev 5, If 8, Class=Communications, Driver=cdc_wdm, 480M
|__ Port 4: Dev 5, If 6, Class=Communications, Driver=cdc_ncm, 480M
|__ Port 4: Dev 5, If 10, Class=CDC Data, Driver=cdc_acm, 480M
|__ Port 4: Dev 5, If 4, Class=CDC Data, Driver=cdc_acm, 480M
|__ Port 4: Dev 5, If 2, Class=CDC Data, Driver=cdc_acm, 480M
|__ Port 4: Dev 5, If 0, Class=Communications, Driver=, 480M
|__ Port 4: Dev 5, If 9, Class=Communications, Driver=cdc_acm, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 1: Dev 15, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 6: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 6: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter
[01;31mError: [0mfailed to read packet header from the GIMX adapter

Re: failed to read packet header from the GIMX adapter

Posted: Fri Apr 12, 2019 5:29 am
by Matlo
This board is clocked at 8Mhz, it cannot work with GIMX.

https://www.adafruit.com/product/2771