Page 1 of 2

gimx+g27 avec PS4

Posted: Sun Oct 02, 2016 10:53 am
by BapsySacko
Salut les gars je sais pas si vous avez toujours besoin d'aide mais on sait jamais
Alors moi aussi j'ai le meme soucis avec mon adaptateur pour mon G27 et apparement sa serait la faute des cables en questions pour brancher la PS4 a l'adaptateur et l'adaptateur au PC, les cables ne sont pas "blindés", j'ai pu un peu parler avec Rolyat d le gars qui montre comment brancher son adaptateur et lui m'a dit qu'il avait eu le meme probleme la premiere fois affirmer qu'il fallait juste changer les cables USB en attente du mien pour vous tenir au courant je sais pas si je me suis bien expliquer donc je vous met la conv




"Moi" -Hello guys
I've done done this perfectly like in the video and when i click on verify it's saying " this config seems ok" but when i click on start i've the following message :" GIMX ran less than 5 seconds" i dont understand why please someone can help me thanks
Sorry for my english i'm french



"Rolyat d" -i had the same issue when i first made the adapter. i changed the chords & everything worked. if one of your chords is unshielded it will make the whole thing crash. hopefully that fixes your problem




"Moi" -hi
Thanks for you answer do you talk about the jumper câble ? because i've already changed them



"Rolyat d" -not the jumper cables but the chords you use to connect the device to the computer & the playstation. if you built your Gimx using the "how to usb adapter" wiki site youll see that they list some really cheap chords to connect the adapter to the computer & playstation. Those chords will not work. You'll need some "shielded" chords that you can find at any electronics store. also make sure that you plug the Adapter into the usb port that you use to charge a device. if you have it plugged into another port that doesnt provide power it wont work. hopefully that helps your situation




"Moi" - Ohhh yes OK now i have understand thanks but i dont know how to find them can you send me a link to buy pls




"Rolyat d" - here is what you will need, 1 5-pin USB 2.0 (shielded) chord, 1 male to female USB 2.0 (shielded) extention chord, and 1 micro USB 2.0 (shielded) chord. The 5-pin was the chord used to charge the ps3 controller & the micro is used to charge the ps4 controller so you may already have those.




"Moi" -Ok thanks for help tell you if it's work or no
En esperant vous aider

Re: gimx+g27 avec PS4

Posted: Mon Oct 03, 2016 8:52 pm
by Matlo
Oui effectivement les câbles ont une importance. Il faudra mettre à jour le wiki. Il y a déjà une note sur ce point mais cela n'est sans doute pas suffisant.

Re: gimx+g27 avec PS4

Posted: Thu Oct 13, 2016 6:36 pm
by BapsySacko
Salut
Si vous avez des conseils a me donner je suis preneur car je n'ai toujours pas recu mon cable et j'ai vraiment marre de devoir attendre pour jouer a DriveClub

Re: gimx+g27 avec PS4

Posted: Fri Oct 14, 2016 7:31 am
by Matlo
Malheureusement, pas de magie, il faut des câbles corrects pour que cela fonctionne.

Re: gimx+g27 avec PS4

Posted: Mon Oct 17, 2016 3:37 pm
by BapsySacko
Salut tout le monde,
Meme apres avoir changer les cable j'ai ce message encore:

global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `COM5'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.9 x86_64
Windows 10 (or later) x64
Kernel version: 10.0 (14393)
native mode is already enabled for HID device \\?\hid#vid_046d&pid_c29b#6&20ce655&3&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (PID=c29b)
ReadFile failed: timeout expired.
can't read packet header
No controller detected.
adapter_detect failed

J'ai deja tout éssayer

Re: gimx+g27 avec PS4

Posted: Wed Oct 26, 2016 2:23 pm
by BapsySacko
Update du probeme en etant passer de GIMX 5.9 a GIMX6.0 :

global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `COM5'
now reading arguments for controller #2
le flag "status" est positionné
le flag "subpos" est positionné
le flag "force_updates" est positionné
GIMX 6.0 x86_64
Windows 10 (or later) x64
Kernel version: 10.0 (14393)
windows/async.c:330 async_read_timeout: ReadFile failed: timeout expired.
can't read packet header
gimx.c:207 SDL_main: no adapter detected

Re: gimx+g27 avec PS4

Posted: Wed Oct 26, 2016 6:13 pm
by Matlo
Il y a probablement un problème au niveau de la connexion entre les deux cartes.
Poste une photo de ton montage qui montre bien le câblage.

Re: gimx+g27 avec PS4

Posted: Tue Nov 01, 2016 4:33 pm
by BapsySacko

Re: gimx+g27 avec PS4

Posted: Thu Nov 03, 2016 2:12 pm
by Matlo
Les soudures n'ont pas l'air correctes : l'étain devrait recouvrir tout l'espace entre le trou et la pin, des deux côtés de la carte.
Et il semble qu'un composant de surface s'est dé-soudé près de B5 et B6...

Re: gimx+g27 avec PS4

Posted: Fri Nov 04, 2016 9:50 pm
by BapsySacko
Ok donc si je ressoude tout bien correctement cela devrait marcher ?