Microchip PIC GIMX PORT (formerly "Serial->USB uC code?")

Talk about anything concerning the source code.
User avatar
Matlo
Posts: 4451
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Microchip PIC GIMX PORT (formerly "Serial->USB uC code?"

Post by Matlo » Fri May 17, 2013 4:34 pm

GIMX creator Donate Shop

xiran
Posts: 6
Joined: Sun May 12, 2013 5:06 am

Re: Microchip PIC GIMX PORT (formerly "Serial->USB uC code?"

Post by xiran » Sat May 18, 2013 6:05 am

Ok, i compare the files, and i can´t find the similarity... i need to do this slowly, i only try to find the 2 codes posted, very fast, not minutely... if i found something, i´ll post it. thx!

User avatar
ALoGeNo
Posts: 4
Joined: Thu Oct 13, 2011 12:03 am

Re: Microchip PIC GIMX PORT (formerly "Serial->USB uC code?"

Post by ALoGeNo » Mon Nov 11, 2013 2:36 am

Hello guys, I'm trying to build me a gimx pic, but this link "http://diyps3controller.googlecode.com/ ... ck-serial/" is empty, can some one please, paste the firmware sources or the firmware binary of that great Ratt port?.

Thank you very much to Matlo and Ratt for do it that stuff plausible in any case.

Best regards.

User avatar
Matlo
Posts: 4451
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Microchip PIC GIMX PORT (formerly "Serial->USB uC code?"

Post by Matlo » Mon Nov 11, 2013 4:29 pm

The firmware for AVR USB chips was moved to http://diyps3controller.googlecode.com/ ... ck-serial/
It changed since GIMX 1.10, and the code posted by Ratt in this thread is not compatible with GIMX 1.10 or later.

The code ported by Ratt is at http://diyps3controller.googlecode.com/ ... ck-serial/
I uploaded Ratt's code (the code posted in this thread) there: http://diyps3controller.googlecode.com/ ... ck-serial/
GIMX creator Donate Shop

User avatar
ALoGeNo
Posts: 4
Joined: Thu Oct 13, 2011 12:03 am

Re: Microchip PIC GIMX PORT (formerly "Serial->USB uC code?"

Post by ALoGeNo » Mon Nov 11, 2013 6:30 pm

Thank you very much for the info and sources.

I'ts a same that Ratt didn't updated the pic port, anyway thank you both again :).

I hope Ratt comeback soon over here with fresh news hehe.

Cheers.

robo_z
Posts: 1
Joined: Sun Jan 08, 2017 5:57 pm

Re: Microchip PIC GIMX PORT (formerly "Serial->USB uC code?")

Post by robo_z » Sun Jan 08, 2017 6:16 pm

I'm Try to Compile:

But have this error:

Image

the code is from:
https://github.com/matlo/GIMX-firmwares ... ick-serial

the code for 18F4550 (posted here) compile without problems

but i need the code for 18F2550

anyone can help me :roll:

Post Reply