PC to PS3 usb issue
-
- Posts: 31
- Joined: Sun Jul 17, 2011 6:39 am
PC to PS3 usb issue
Ok lets see if we can get this resolved. I got the pinned teensy board and the CP2102 converter, hooked it up as shown in the tutorial. I am running Vista, loaded up two different hex files to the teensy. When I run the emu serial application I am only getting COM3 as an option. Windows is asking for drivers for the CP2102 which I did try installing from silabs but it just added COM4 to the list. I've since uninstalled those drivers. I am able to start the emu, and the gui is showing feedback, but the PS3 isn't recognizing anything, no joystick connection or anything. It's a Fat PS3 originally 40GB, upped to 250GB. System software is 3.66.
-
- Posts: 31
- Joined: Sun Jul 17, 2011 6:39 am
Re: PC to PS3 usb issue
Yes I have. That's the set I have currently.
-
- Posts: 31
- Joined: Sun Jul 17, 2011 6:39 am
Re: PC to PS3 usb issue
Bleh, now it is working hehe. Seems to be a common issue for me.
Re: PC to PS3 usb issue
I had a similar problem when I first used the adapter, the CP2102 was assigned to COM20 (wtf) but COM2 happened to be available so I manually changed it and now it's working automatically each time I fire up the emulator.
My Config Repository | PSN: McKack - Steam: McKack - XBL: Ozukaki | Config Post Template
-
- Posts: 25
- Joined: Sat Oct 08, 2011 6:21 pm
Re: PC to PS3 usb issue
Hey could you tell me what you did exactly?tarrant_01 wrote:Bleh, now it is working hehe. Seems to be a common issue for me.
Did you have exactly the same problem? I don't get it. I have COM3 and COM4 available, neither of them work!McKack wrote:I had a similar problem when I first used the adapter, the CP2102 was assigned to COM20 (wtf) but COM2 happened to be available so I manually changed it and now it's working automatically each time I fire up the emulator.
Re: PC to PS3 usb issue
What COM# do you have in the device manager for the cp2102?
If it is higher than or equal to COM10, it won't be correctly detected by sixemugui. Just change it to a lower value. This will be corrected in the next version (issue 97).
If it is higher than or equal to COM10, it won't be correctly detected by sixemugui. Just change it to a lower value. This will be corrected in the next version (issue 97).
GIMX creator