Hello Matlo,
I've been using GIMX with XBone for some time.
I've downloaded latest firmware and wanted to use GIMX with my PS4.
Teensy is not recognized.
Firmware used:
firmwares-5.0/EMUPS4/atmega32u4.hex
firmwares-5.0/EMUXONE/atmega32u4.hex
Xbone setup works fine, PS4 is not recognised.
Any tips?
PS4 - Teensy not recognised
Re: PS4 - Teensy not recognised
Hello,
Please describe your setup as requested here:
http://gimx.fr/forum/viewtopic.php?f=5&t=691
And also please post the content of the cmd window.
Please describe your setup as requested here:
http://gimx.fr/forum/viewtopic.php?f=5&t=691
And also please post the content of the cmd window.
GIMX creator
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Re: PS4 - Teensy not recognised
the GIMX software version - 5.0 - works with XBone
the OS: Ubuntu 64bits and Raspbian (tested on laptop and Raspberry PI) - works with XBone
bluetooth DODOCOOL - worked with PS4 before
DIY USB adapter Teeny 2.0 - worked with PS4 before, works with XBone
USB to serial adapter USB 2.0 to TTL UART 6PIN Module Serial Converter CP2102 STC - worked with PS4 before, works with Xbone
Firmware (version + folder + file)
firmwares-5.0/EMUPS4/atmega32u4.hex - do not work
firmwares-5.0/EMUXONE/atmega32u4.hex - work
the console: Xbox one - working just fine
the console: PS4 - Not recognising Teensy
When adding new pairing, I can connect DS4 but doesn't go through "connect teensy" prompt.
I've been using PS4 with previous versions of GIMX before and I'm 100% sure my setup works.
It looks like it's firmware issue
the OS: Ubuntu 64bits and Raspbian (tested on laptop and Raspberry PI) - works with XBone
bluetooth DODOCOOL - worked with PS4 before
DIY USB adapter Teeny 2.0 - worked with PS4 before, works with XBone
USB to serial adapter USB 2.0 to TTL UART 6PIN Module Serial Converter CP2102 STC - worked with PS4 before, works with Xbone
Firmware (version + folder + file)
firmwares-5.0/EMUPS4/atmega32u4.hex - do not work
firmwares-5.0/EMUXONE/atmega32u4.hex - work
the console: Xbox one - working just fine
the console: PS4 - Not recognising Teensy
When adding new pairing, I can connect DS4 but doesn't go through "connect teensy" prompt.
I've been using PS4 with previous versions of GIMX before and I'm 100% sure my setup works.
It looks like it's firmware issue
Re: PS4 - Teensy not recognised
You have to select DIY USB as output to use the EMUPS4 firmware.
The Bluetooth method uses a different firmware called EMUPS4PAIRING.
The Bluetooth method uses a different firmware called EMUPS4PAIRING.
GIMX creator
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Re: PS4 - Teensy not recognised
EMUPS4PAIRING is not included in latest firmware - this looks like solution to my problem.
Can you upload it somewhere?
For Xbox I use one and only method - DIYUSB.
For PS4 I wanted to use "reglar" method - Bluetooth/PS4.
Can you upload it somewhere?
For Xbox I use one and only method - DIYUSB.
For PS4 I wanted to use "reglar" method - Bluetooth/PS4.
Re: PS4 - Teensy not recognised
Any reason not to use the USB method with the PS4?
EMUPS4PAIRING is available here: http://gimx.fr/wiki/index.php?title=PS4
It is not provided with the other firmware because it has a very different purpose, and it would be very confusing to distribute it in the same archive.
EMUPS4PAIRING is available here: http://gimx.fr/wiki/index.php?title=PS4
It is not provided with the other firmware because it has a very different purpose, and it would be very confusing to distribute it in the same archive.
GIMX creator
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Re: PS4 - Teensy not recognised
Got it already from my old archives
I knew it will be case of firmware.
I did not know I can connect PS4 via "cable method"+ DIYUSB.
I'll test it.
THX for your help!!
I knew it will be case of firmware.
I did not know I can connect PS4 via "cable method"+ DIYUSB.
I'll test it.
THX for your help!!
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Re: PS4 - Teensy not recognised
OK, another issue.
I've tried both ways - Bluetooth and DIY USB (both firmwares).
GIMX is working fine but PS4 is not reacting on GIMX inputs.
http://screenshot.sh/odylc7CW8RBlA
Any idea?
I've tried both ways - Bluetooth and DIY USB (both firmwares).
GIMX is working fine but PS4 is not reacting on GIMX inputs.
http://screenshot.sh/odylc7CW8RBlA
Any idea?
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Re: PS4 - Teensy not recognised
Well, you forgot to add "unplug the pad before pushing PS button".
Way of connecting changed since I used it last time
Everything works fine now
Way of connecting changed since I used it last time
Everything works fine now