Game Input MultipleXer

Ciao,

Firstly I want to say great work creating this tool!

Unfortunately I'm having some trouble getting my steering wheel setup to work.

Here's the details:

Setup:
As per instructions on: http://gimx.fr/wiki/index.php?title=DIY ... or_dummies
Teensy ++ 2.0 with correct file at90usb1286.hex loaded
RX pin D3 TX pin D2 (Correct, tested stops working if swapped!)
USB 2.0 to UART TTL 6PIN Module Serial Converter CP2102
Steering Wheel: Logitech Formula Force EX
Game System: PS4 (Original) currently with game GT Sport
Control: PC with Windows 7 Professional

Issue:
The steering wheel buttons are not mapped as expected and neither the brake or throttle pedal work.

- GIMX-Launcher Check is OK (Output = GIMX adapter, Port = COM3, Input = Physical devices, Config = LogitechDriverForceEX_G29.xml, GetMouse = Checked)
- Regarding Config files - For the Logitech Driving Force or Formula Force all the config files are the same except name (as you would expect)
- In GIMX-config Axis seem fine, Auto detect button for an axis then message in bottom bar disapears when activating axis
- All checks work and I connect to the PS4 Dual Shock and control the PS4 with the steering wheel d-PAD
- All steering wheel functions calibrate fine within the Logitech Software (Logitech Software reconises the wheel as 'Driving Force USB'
Steering axis is fine and feels good.

Test Log on Pastbin at this link: https://pastebin.com/rraTUBis

For reference the button naming in the Logitech software is as following:
Button Wheel
1 = Cross equivalent
2 = Square equivalent
3 = Circle equivalent
4 = Triangle equivalent
5 = Shift Up (Back Right)
6 = Shift Down (Back Left)
7 = As desired (Upper right)
8 = As desired (Upper left)
9 = As desired (Lower 4 LL)
10 = As desired (Lower 4 LR)
11 = As desired (Lower 4 UR)
12 = As desired (Lower 4 UL)
(13?) = Steering Wheel
(14?) = Accelerator
(15?) = Brake
D-Pad = POV 1 (8 way)

My fingers are crossed for a simple and quick fix!

Thanks again for the help all

Install the Logitech Garming Software, and disable combined pedals.

Hi Matlo,

I forgot to mention that I already checked that.

In the 'Logitech Profiler' software in both 'Global Device Settings' the 'Report Combined Pedals' is disabled and in the 'Game Controllers - Logitech Formula Force EX Properties' (calibration test page) under that settings tab 'Pedals reported as...Combined' is also disabled.

Is there a different logitech driver I need to use? I download the latest and got version 5.9.129.0 (2010)

Thanks alot for the quick feedback

Does gimx-config detect your pedals? Go to the axis tab and click on auto-detect. Then fully press a pedal, and check the axis id is correct.

Hello,

Yes auto detect of throttle, brake and steering in GIMX config all pick up ok (Mentioned in 1st post)

Default settings - Dead Zone = 0, Sensitivity = 0.008 for throttle and brake (0.004 for steering) and Acceleration = 1.0.

I did another test log only applying throttle and brake once on track then quitting. https://pastebin.com/XgFGDESh

gimx-config version 6.11 x86_64.

Thanks again!

Trygve

It seems you loaded the wrong firmware (EMUPS4). Please try the EMUG29PS4 firmware.

FFS - It was going to be something simple... I should have gone back and checked that but it's working now! Thanks so much for your help!