Can't get it working

Need help? Ask here and someone will help
Post Reply
ghepardonado
Posts: 4
Joined: Wed May 09, 2018 12:30 pm

Can't get it working

Post by ghepardonado »

Start PS with GIMX adapter
Start launcher with config FC5
Checkwarning multiple mouse and keyboard not managed
GIMX says press PS button
Nothing happens yellow light controller
if unplug and open controller error also nothing happens
WHAT AM I DOING WRONG
I use Logitech G710+ and G700 wireless gaming mouse
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Can't get it working

Post by GoDlike »

Hello,

I moved your post from configuration section as it's not related to FC5 config.

Please push PS button or nothing will happen, in FC5 config it's Backspace.

If that does not help please attach log as stated in rules - viewtopic.php?f=5&t=691

Regards,
Daniel
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
ghepardonado
Posts: 4
Joined: Wed May 09, 2018 12:30 pm

Re: Can't get it working

Post by ghepardonado »

The only button that works is the backspace as PS button no other movements nothing
I tried uninstalling all keyboards from device manager until it was only one, disabled Logitech gaming software change the ports still nothing.

https://pastebin.com/KHfhuqd8

I use GIMX adapter on PS4 PRO
Adapter worked perfectly on GT Sport with G27 so the adapter works I am doing something wrong
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Can't get it working

Post by GoDlike »

You currently have EMUG29_PS4 firmware loaded and it's intended to use with steering wheel. What you need is to flash EMUPS4 firmware that allows to use keyboard and mouse. Just run gimx-loader and follow the instructions. After flashing you can play FC5 without problems ;-)
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
ghepardonado
Posts: 4
Joined: Wed May 09, 2018 12:30 pm

Re: Can't get it working

Post by ghepardonado »

Yeah just did that I saw in the log
ghepardonado
Posts: 4
Joined: Wed May 09, 2018 12:30 pm

Re: Can't get it working

Post by ghepardonado »

But the mouse barely moves. How much DPI should I use?
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Can't get it working

Post by GoDlike »

Every config is different. I think I used 3600 for FC5. It's listed if you open config with editor like gimx-fpsconfig. If it's still too low you can always increase sensitivity.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Post Reply