GIMX with Arduino Micro

Need help? Ask here and someone will help
mohamed-raad
Posts: 8
Joined: Sat Oct 06, 2018 8:35 pm

GIMX with Arduino Micro

Post by mohamed-raad » Sat Oct 06, 2018 8:50 pm

hello guys

am interested in this adapter and i want to make one but unfortunately i didn't find a usb to ttl converter in my area then i bought two arduino micro (ATmega32U4) but when i try to load the firmware to the adapter i get this message (avrdude butterfly_recv() programmer not responding)


can anyone help me with it

and can anyone send a photo of wiring the two arduino boards

mohamed-raad
Posts: 8
Joined: Sat Oct 06, 2018 8:35 pm

Re: GIMX with Arduino Micro

Post by mohamed-raad » Sun Oct 07, 2018 2:21 pm

hello again i've figured out how to build the firmware on the arduino but after that the arduino disconnects and shows the rx and tx led lights and nothing happen then.


i have tried to build the firmware on another micro board but i had the same result.

i tried to build an older firmware and the same problem occurs


i've changed the wires and nothing happen

and on the gimx launcher i get timeout message.


please help :(

User avatar
kaiba_seto2004
Posts: 198
Joined: Sat Jul 15, 2017 9:15 am

Re: GIMX with Arduino Micro

Post by kaiba_seto2004 » Sun Oct 07, 2018 10:27 pm

Well, I don't think you can replace usb uart with arduino.
PS4 enthusiast.

User avatar
GoDlike
Posts: 502
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: GIMX with Arduino Micro

Post by GoDlike » Mon Oct 08, 2018 11:50 am

There was a way to do that some time ago but I don't know if it's still supported. @Matlo should know though.
My hardware: Xbox 360 S "Trinity" RGH | PS3 Slim CFW 4.80 | PS4 6.00 | Mouse: 8 years old Gigabyte M8000x :mrgreen:
My Steam: http://steamcommunity.com/id/Godlike_RU/ | PSN: GoDlike_RU

mohamed-raad
Posts: 8
Joined: Sat Oct 06, 2018 8:35 pm

Re: GIMX with Arduino Micro

Post by mohamed-raad » Tue Oct 09, 2018 12:25 am

Thanks guys
I found a frimware for the arduino to make just like usb to ttl converter on Malto's github page


But when i try to compile it i get many errors

I wish i could use it at the moment 😐

User avatar
Matlo
Posts: 5023
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: GIMX with Arduino Micro

Post by Matlo » Tue Oct 09, 2018 9:16 am

This is a test firmware I made a while back. I will compile it for you but please understand I won't help further if it doesn't work.
GIMX creator Donate Shop

mohamed-raad
Posts: 8
Joined: Sat Oct 06, 2018 8:35 pm

Re: GIMX with Arduino Micro

Post by mohamed-raad » Tue Oct 09, 2018 9:38 am

Ok and thanks for that.


Yes i will not ask for help about it 🙂.

And if it doesn't work i will order a serial converter.

Many thanks.

User avatar
Matlo
Posts: 5023
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: GIMX with Arduino Micro

Post by Matlo » Tue Oct 09, 2018 8:30 pm

GIMX creator Donate Shop

mohamed-raad
Posts: 8
Joined: Sat Oct 06, 2018 8:35 pm

Re: GIMX with Arduino Micro

Post by mohamed-raad » Tue Oct 09, 2018 8:40 pm

oh ,thanks bro

mohamed-raad
Posts: 8
Joined: Sat Oct 06, 2018 8:35 pm

Re: GIMX with Arduino Micro

Post by mohamed-raad » Tue Oct 09, 2018 8:47 pm

there is only one problem with the driver

it tells me (the third-party inf does not contain digital signature information)

Post Reply