(Xbox One)(RPI) Gimx exits when guide button is pressed

Need help? Ask here and someone will help
Josh
Posts: 23
Joined: Thu Oct 18, 2018 10:36 pm

(Xbox One)(RPI) Gimx exits when guide button is pressed

Post by Josh » Thu Oct 18, 2018 11:21 pm

Ok so I am running the latest version of Gimx on raspbian stretch, I am using the homemade adapter using an Arduino Leonardo and the CP2102 ttl to usb adapter. The adapter is running the atmega32u4.hex. When I run Gimx with my fortnite config I get to the point when it tells me to press guide to activate the controller, once I do this nothing happens to the Gimx screen but it does let me control my xbox with my mouse and keyboard. However when I press the guide button again it exits Gimx, this also happens by itself sometimes if I leave for a bit. I have been looking on google for about 3 hours now and found similar articles but none of there solutions have worked for me, please help. Thanks.

https://pastebin.com/bdBteuB8

User avatar
Matlo
Posts: 5041
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by Matlo » Sat Oct 20, 2018 7:42 am

The cause is probably that the guide button of the input controller is not bind to the guide button of the output/emulated controller.
You can either add a binding, or not use the controller at all (except for the activation).
GIMX creator Donate Shop

Josh
Posts: 23
Joined: Thu Oct 18, 2018 10:36 pm

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by Josh » Sat Oct 20, 2018 5:22 pm

What do you mean? What I do when I try to start gimx is, start my rpi,plug the controller in to the pi, plug the adapter into the Xbox then plug it into the pi, after that I open gimx and hit start. What I have to do right after I start it is exit gimx because when I plug my Xbox controller into rpi it auto turns on and exiting it turns the controller off. Then I start gimx again and I get to the point where it askes me to activate the controller, so I press the button on my keyboard that I have bound to the guide button and then the gimx screen, the gimx screen stays frozen on press the activation button but I can control my Xbox for a limited amount of time. If i try to hit the guide button on the controller nothing happens, it only works if I press the guide button on the keyboard. I can send pics if you want and or I can post a vid on YouTube.

User avatar
Matlo
Posts: 5041
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by Matlo » Sat Oct 20, 2018 6:52 pm

Please make another log file. Reproduce the issue while generating the log file.
GIMX creator Donate Shop

Josh
Posts: 23
Joined: Thu Oct 18, 2018 10:36 pm

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by Josh » Sat Oct 20, 2018 7:35 pm

https://pastebin.com/yNuWAvKx

Ok here is is, when it says guide (225) thats me pressing L on my keyboard. You can see in my config that I have L bound to the guide button. What happens is I press L on the keyboard to activate the controller, then I press L again and it shuts off my controller and says that the controller disconnected (error message).

User avatar
GoDlike
Posts: 542
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by GoDlike » Sat Oct 20, 2018 7:46 pm

You may need to press guide button for 3-5 seconds. Try this
My hardware: Xbox 360 S "Trinity" RGH | PS3 Slim CFW 4.80 | PS4 6.00 | Mouse: 8 years old Gigabyte M8000x :mrgreen:
My Steam: http://steamcommunity.com/id/Godlike_RU/ | PSN: GoDlike_RU

Josh
Posts: 23
Joined: Thu Oct 18, 2018 10:36 pm

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by Josh » Sat Oct 20, 2018 9:44 pm

Tried that, still has the same issue.

Josh
Posts: 23
Joined: Thu Oct 18, 2018 10:36 pm

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by Josh » Mon Oct 22, 2018 1:08 am

Got anymore ideas?

User avatar
GoDlike
Posts: 542
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by GoDlike » Mon Oct 22, 2018 5:59 pm

No for now, keep in mind that RPI support is still experimental, there may be bugs like that. We recommend using Linux/Windows machine for now.
My hardware: Xbox 360 S "Trinity" RGH | PS3 Slim CFW 4.80 | PS4 6.00 | Mouse: 8 years old Gigabyte M8000x :mrgreen:
My Steam: http://steamcommunity.com/id/Godlike_RU/ | PSN: GoDlike_RU

User avatar
Matlo
Posts: 5041
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: (Xbox One)(RPI) Gimx exits when guide button is pressed

Post by Matlo » Mon Oct 22, 2018 6:32 pm

Please try with the XOnePadUsb.xml config and check if it behaves the same. This may help understanding the issue.
GIMX creator Donate Shop

Post Reply