The pc doesn't detect the adapter(diy)

Need help? Ask here and someone will help
Post Reply
luke30001
Posts: 2
Joined: Mon Dec 31, 2018 3:16 pm

The pc doesn't detect the adapter(diy)

Post by luke30001 » Mon Dec 31, 2018 3:22 pm

Good day,i build by arduino leonardo a gimx adapter but the pc doesn't detect its.
This is the picture of problem:
https://drive.google.com/file/d/1F0l4xw ... p=drivesdk

szlovak
Posts: 11
Joined: Tue Mar 03, 2015 7:50 pm

Re: The pc doesn't detect the adapter(diy)

Post by szlovak » Mon Dec 31, 2018 4:02 pm

Long story short: is it programmed? Did you RTFM? Programming through app is not working in my opinion, at least not easy way. I used a separate programmer USBAsp exactly and AVRDUDESS

luke30001
Posts: 2
Joined: Mon Dec 31, 2018 3:16 pm

Re: The pc doesn't detect the adapter(diy)

Post by luke30001 » Mon Dec 31, 2018 5:05 pm

thank for replay,i find a way to install avrdude because follow the officialguide of gimx it say me that avrdude isn't a command.

User avatar
GoDlike
Posts: 715
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: The pc doesn't detect the adapter(diy)

Post by GoDlike » Mon Dec 31, 2018 6:31 pm

Use gimx-loader to flash firmware, it is designed for it.

Check wiring and cables, also check if RX/TX isn't inverted. Please post photo of wiring.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | Xbox One S
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike

Post Reply