Board compatibility

Need help? Ask here and someone will help
Post Reply
mikadoryu
Posts: 5
Joined: Mon Nov 26, 2012 7:07 pm

Board compatibility

Post by mikadoryu »

sorry for my English because I am currently using a translator.


I wonder if this development board serves to use the gimx:



Features
ATMega 32U4 running at 5V/16MHz.
Supported under Arduino IDE v1.0 (un-comment "leonardo" lines in boards.txt).
On-Board micro-USB connector for programming.
4 x 10-bit ADC pins.
12 x Digital I/Os (5 are PWM capable).
Rx and Tx Hardware Serial Connections.
Our Smallest Arduino-Compatible Board Yet!.
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: help

Post by Matlo »

It should be compatible as it uses the same chip as the teensy 2.0.
GIMX creator
mikadoryu
Posts: 5
Joined: Mon Nov 26, 2012 7:07 pm

Re: help

Post by mikadoryu »

thanks for replying, I'll see if I buy it because the teensy in my country I could not find, my last question is this teblero this CP2102 USB to RS232 TTL should work?
HIGH5
Posts: 105
Joined: Sun Sep 11, 2011 1:51 pm
Location: TLV

Re: help

Post by HIGH5 »

^Yes.
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: help

Post by Matlo »

Note that you may have issues to load the firmware.
It's not as easy as with the Teensy 2.0 (the Teensy loader can only be used with Teensy boards).
GIMX creator
Post Reply