Normalized parameters

Post or request custom configuration files.
Locked
User avatar
Matlo
Posts: 4245
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Normalized parameters

Post by Matlo » Sun Jul 31, 2011 1:51 pm

This post is intended to summarize the parameters that have to be applied to be close to a 1:1 translation.

The only thing to calibrate using the calibration mode is the x multiplier (=sensitivity) of both the primary and secondary (ADS) configs:

1- tick the Mouse>Calibrate checkbox in sixemugui, and start emuclient
2- use ctrl+F1 and the mouse wheel to select the mouse
3- F2 and the mouse wheel to select the config
--Steps 4 to 9: set the normalized parameters--
4- F12 and the mouse wheel to set the x/y ratio
5- F3 and the mouse wheel to set the x dead zone
6- F4 and the mouse wheel to set the y dead zone
7- F5 and the mouse wheel to set the dead zone shape
8- F7 and the mouse wheel to set the x acceleration
9- F8 and the mouse wheel to set the y acceleration
--Step 10 to 12: adjust the x multiplier and save--
10- F9 and the mouse wheel to adjust the x sensitivity
11- save (ctrl+F1) and quit the calibration mode (esc)
12- untick the Mouse>Calibrate checkbox, and test your new parameters

Don't use sixemuconf to adjust the x multiplier: doing this you will most probably break the x/y ratio.

These values are obtained thanks to the calibration mode, using the same deterministic method.

Be sure to understand what "normalized" means before proposing parameters for a game that is not listed there.
  • Call Of Duty: Black Ops, Modern Warfare 2
    • Primary config:
      • x/y ratio 2.85
      • x dead zone 22
      • y dead zone 22
      • dead zone shape circle
      • x acceleration 0.39
      • y acceleration 0.39
    • Secondary config - ADS:
      • x/y ratio 1.71
      • x dead zone 22
      • y dead zone 22
      • dead zone shape circle
      • x acceleration 0.25
      • y acceleration 0.25
  • [anchor]BFBC2[/anchor]
  • Battlefield: Bad Company 2
    • Primary config:
      • x/y ratio 1.25
      • x dead zone 31
      • y dead zone 31
      • dead zone shape circle
      • x acceleration 0.40
      • y acceleration 0.40
    • Secondary config - ADS:
      • x/y ratio 1.25
      • x dead zone 31
      • y dead zone 31
      • dead zone shape circle
      • x acceleration 0.40
      • y acceleration 0.40
  • [anchor]Crysis2[/anchor]
  • Crysis 2
    • Primary config:
      • x/y ratio 1.75
      • x dead zone 28
      • y dead zone 28
      • dead zone shape circle
      • x acceleration 0.50
      • y acceleration 0.50
    • Secondary config - ADS:
      • x/y ratio 1.75
      • x dead zone 28
      • y dead zone 28
      • dead zone shape circle
      • x acceleration 0.50
      • y acceleration 0.50
Donate Shop

Locked