Hello Matlo and all,
I have gimx installed on my raspberry Pi with raspbian but i cant change the polling rate from my mouse, cause from stock ill bet it has 1000hz (razer imperator) and im getting lag on my games.
If i play with the controller i dont get any lagg, but with gimx it happens all the time.
So i've read that by changing the polling rate from my mouse to 250hz or 500hz i would not lag that much.
Can anyone help me with the commands to lower my mouse polling rate on raspbian? Cause on this page i could not get it to work http://gimx.fr/wiki/index.php?title=Mouse_tweaks . The commands of linux do not work on raspbian.. or at least that tutorial.
Thanks,
Daniel
Mouse calibration / polling rate Raspbian
Re: Mouse calibration / polling rate Raspbian
Add this line at the end of cmdline.txt:
(this file is in the boot partition)
Then reboot, and check the result with:
Code: Select all
usbhid.mousepoll=4
Then reboot, and check the result with:
Code: Select all
cat /sys/module/usbhid/parameters/mousepoll
GIMX creator
Re: Mouse calibration / polling rate Raspbian
Hi Matlo,
I know that it is an old post, but thanks for your tips it was really useful.
I had a very similar issue with my 8200 DPI mouse, very slow and lagging, now solved!
I know that it is an old post, but thanks for your tips it was really useful.
I had a very similar issue with my 8200 DPI mouse, very slow and lagging, now solved!
Re: Mouse calibration / polling rate Raspbian
I own a 1000hz mouse, actually i use usbhid.mousepoll=1 and It works flawless
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Re: Mouse calibration / polling rate Raspbian
I think this should be added to Wiki or at least be sticked to the top of support.