https://pastebin.com/wBCjQ26f
Above is the link for my log file.
Gimx adapter, made myself (Teensy 2.0 w/ pins, USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter.
Firmware is 5.8/EMUPS4/atmega32u4.hex
Gaming target is PS4.
Game will be GT Sport. (same issue with G25 connected with drivers installed, no DS4 controller detected)
Controller is original DS4 with original cable.
Windows 10 up to date.
All drivers installed.
Tried multiple cables and controllers.
Gimx adapter is wired correctly, swapping rx/tx results in adpter not found, swap rx/tx........
All usb ports have power saving disabled.
Re-installed Gimx, read tutorial multiple times. Pretty sure adapter is good.
Advice please, thanks.
Error: No game controller was found on USB ports.
-
- Posts: 8
- Joined: Sun Apr 22, 2018 2:01 pm
Re: Error: No game controller was found on USB ports.
Hello,
Are you plugging DS4 directly to the pc without any hubs etc? Does it work in games.
Are you plugging DS4 directly to the pc without any hubs etc? Does it work in games.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
-
- Posts: 8
- Joined: Sun Apr 22, 2018 2:01 pm
Re: Error: No game controller was found on USB ports.
Yes it works with games when not connected to pc and when playing remotely with pc. And no, it is not plugged into a hub.
I can check the config without the ds4 hooked up and it says no controller detected, true. I plug controller in, refresh gimx launcher, and it says config seems ok, so it must be able to see the ds4. Start the process and no controller found error.
Re: Error: No game controller was found on USB ports.
Did you try any other cable?
Could you please install UsbDk from the GIMX/tool directory and see if it provides any error?
Could you please install UsbDk from the GIMX/tool directory and see if it provides any error?
GIMX creator
-
- Posts: 8
- Joined: Sun Apr 22, 2018 2:01 pm
Re: Error: No game controller was found on USB ports.
Yes, I've tried 5 cables and 3 controllers. I had installed UsbDk without errors. I uninstalled just now and tried to reinstall and got UsbDk Runtime Libraries error.
-
- Posts: 8
- Joined: Sun Apr 22, 2018 2:01 pm
Re: Error: No game controller was found on USB ports.
Issue solved. Came home and windows had an update. Reinstalled Gimx and all is well. Thanks to all who had suggestions.
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am