Problem Simucube to G27 PC

Need help? Ask here and someone will help
Post Reply
Majony
Posts: 6
Joined: Fri Jan 04, 2019 12:10 am

Problem Simucube to G27 PC

Post by Majony »

Hi,

I try to run my SImucube through the Gimx on my computer so I can play titles like WRC and some more. After doing several tests I can not detect the wheel inside the games, in the logitech panel I get recognized, but in the game I take everything but the steering wheel, in the wrc I have even ffb, but I do not use to turn. I have the Gimx adpater bought in the store, the log I cut it because it would not let me put it whole in the Pastebin since it was very big. I have loaded the G27 firmware for PC and not for PS. I used wrc7 in this log

https://pastebin.com/BuAsn107

I hope sameone can help me please, I have read a lot and searched the forum but I have not found anything that answers me

Thanks in advance
User avatar
kaiba_seto2004
Posts: 553
Joined: Sat Jul 15, 2017 9:15 am

Re: Problem Simucube to G27 PC

Post by kaiba_seto2004 »

Hi,

Due to your log file, you uploaded wrong firmware for your adapter (G27 PS3).
I think you should upload this firmware:
Image
PS4 enthusiast.
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Problem Simucube to G27 PC

Post by Matlo »

Hi,

EMUG27PC also reports "G27 PS3" to the software. I know this is confusing...

The problem here is that you somehow defined a joystick correction that just kills the wheel axis.
Try the following configuration:

Code: Select all

<?xml version="1.0" encoding="UTF-8"?>
<root>
  <controller id="1" dpi="0" type="G27 PS3">
    <configuration id="1">
      <trigger type="" id="" name="" button_id="" switch_back="no" delay="0"/>
      <mouse_options_list/>
      <intensity_list/>
      <button_map>
        <button id="abs_axis_11" label="Subir marcha">
          <device type="joystick" id="0" name="BU0836-LC Interface"/>
          <event type="button" id="9"/>
        </button>
        <button id="abs_axis_13" label="Bajar marcha">
          <device type="joystick" id="0" name="BU0836-LC Interface"/>
          <event type="button" id="2"/>
        </button>
        <button id="abs_axis_19" label="Embrague">
          <device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
          <event type="axis down" id="2" threshold="-10"/>
        </button>
        <button id="abs_axis_1" label="Start">
          <device type="joystick" id="0" name="BU0836-LC Interface"/>
          <event type="button" id="8"/>
        </button>
        <button id="abs_axis_9" label="x">
          <device type="joystick" id="0" name="BU0836-LC Interface"/>
          <event type="button" id="6"/>
        </button>
      </button_map>
      <axis_map>
        <axis id="rel_axis_0" label="Simucube">
          <device type="joystick" id="0" name="SimuCUBE"/>
          <event type="axis" id="0" dead_zone="0" multiplier="0.0039" exponent="1.00" shape=""/>
        </axis>
        <axis id="abs_axis_17" label="Acelerador">
          <device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
          <event type="axis" id="0" dead_zone="0" multiplier="0.008" exponent="1.00" shape=""/>
        </axis>
        <axis id="abs_axis_18" label="Freno">
          <device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
          <event type="axis" id="1" dead_zone="0" multiplier="0.008" exponent="1.00" shape=""/>
        </axis>
        <axis id="abs_axis_19" label="Freno mano">
          <device type="joystick" id="0" name="BU0836-LC Interface"/>
          <event type="axis" id="0" dead_zone="0" multiplier="0.008" exponent="1.00" shape=""/>
        </axis>
      </axis_map>
      <joystick_corrections_list>
        <correction low_value="-32768" low_coef="0" high_value="-32768" high_coef="8191">
          <device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
          <event type="axis" id="0"/>
        </correction>
        <correction low_value="-32768" low_coef="0" high_value="-32768" high_coef="9358">
          <device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
          <event type="axis" id="1"/>
        </correction>
        <correction low_value="-32768" low_coef="0" high_value="-32768" high_coef="8191">
          <device type="joystick" id="0" name="BU0836-LC Interface"/>
          <event type="axis" id="0"/>
        </correction>
      </joystick_corrections_list>
      <force_feedback>
        <device type="joystick" id="0" name="SimuCUBE"/>
        <inversion enable="no"/>
        <gain rumble="100" constant="100" spring="100" damper="100"/>
      </force_feedback>
    </configuration>
  </controller>
</root>
GIMX creator
Majony
Posts: 6
Joined: Fri Jan 04, 2019 12:10 am

Re: Problem Simucube to G27 PC

Post by Majony »

Hi very thanks for the help, but how can i try your configuration Matlo?
Forgiveness for ignorance :geek: :lol:
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Problem Simucube to G27 PC

Post by Matlo »

In gimx-launcher, click on "File > Open config directory".
Open your configuration with a text editor like Notepad++.
Replace the whole contents, save.
GIMX creator
Majony
Posts: 6
Joined: Fri Jan 04, 2019 12:10 am

Re: Problem Simucube to G27 PC

Post by Majony »

Thanks mate, i wanna try tomorrow, i´ll tell you
Majony
Posts: 6
Joined: Fri Jan 04, 2019 12:10 am

Re: Problem Simucube to G27 PC

Post by Majony »

Well its Ok ! but in wrc 4 an gravel i dont have any ffb, i´ll send you the new log with this games to see if it can be solved.
Very thanks !
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Problem Simucube to G27 PC

Post by GoDlike »

Please select Messages->Debug and then check "Haptic" when generating the log file. This should help with FFB debugging.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Majony
Posts: 6
Joined: Fri Jan 04, 2019 12:10 am

Re: Problem Simucube to G27 PC

Post by Majony »

Thanks GoDlike i´ll try it
Post Reply