Hello
I have a problem starting GIMX
It appears to me "Failed to read packet header from gimx adapter"
hi help me
Re: hi help me
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: hi help me
Could it be that it is not useful to have the cables connected without soldering?
sorry if it is not understood, is that my language is Spanish
![Image](https://ibb.co/CKY9q2Y)
![Image](https://ibb.co/kKnpV15)
https://ibb.co/CKY9q2Y
https://ibb.co/kKnpV15
sorry if it is not understood, is that my language is Spanish
https://ibb.co/CKY9q2Y
https://ibb.co/kKnpV15
Re: hi help me
Test tx to rx and rx to tx between the microcontroller and uart.
If that does not work rx to rx and tx to tx.
Looking at the switch option you need to switch the black switch to left position and 1/2 switch to lower position as it is shown on picture 4![Image](https://img.joomcdn.net/2e278918a2732b1a890cc58558bacc2a1d5166b8_original.jpeg)
If that does not work rx to rx and tx to tx.
Looking at the switch option you need to switch the black switch to left position and 1/2 switch to lower position as it is shown on picture 4
![Image](https://img.joomcdn.net/2e278918a2732b1a890cc58558bacc2a1d5166b8_original.jpeg)
Last edited by ckaiycool on Sat Nov 06, 2021 7:32 pm, edited 1 time in total.
Gimx Configs https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
Re: hi help me
If I was able to load the hex file with GIMX-LOADER, is it because it recognizes the adapter that I made?
this is the CP2102 i'm using
https://articulo.mercadolibre.com.ar/ML ... -3v-5v-_JM
this is the CP2102 i'm using
https://articulo.mercadolibre.com.ar/ML ... -3v-5v-_JM
Re: hi help me
Check the picture i linked and set it to the 4 option and see if that works.
Gimx Configs https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
Re: hi help me
I have already configured it like this in the fourth image
but it would be necessary to try the thing from rx to rx and tx to tx
but it would be necessary to try the thing from rx to rx and tx to tx
Re: hi help me
watch the video
https://files.fm/f/3ft2gmvwu
https://files.fm/f/3ft2gmvwu
Re: hi help me
thanks, i just had to do this
https://ibb.co/n0ZdCjz
https://ibb.co/n0ZdCjz
Re: hi help me
Well done ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Gimx Configs https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link