While my question is not related to GIMX, the problem I face is due to face to use of it and this is Game-pad specific community so the experience of the users can help me.
I have used GIMX in two modes, always using Dualshock 3/SixaxiS.
1) SixaxiS wired to Raspberry Pi and Raspberry Pi wireless to PS3
2) SixaxiS wireless to Raspberry Pi and Raspberry Pi connected to DIY (Arduino Board + CP2102) and DIY wired connected to PS3
Both ways GIMX works fine, but no FFB. That's my problem. The same setup for 2) but suing PC+Ubuntu 14.04-3, I got FFB
Using FFTEST tool to verify o have:
Code: Select all
$ cat /proc/bus/input/devices I: Bus=0003 Vendor=054c Product=0268 Version=0111 N: Name="Sony PLAYSTATION(R)3 Controller" P: Phys=usb-3f980000.usb-1.3/input0 S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:054C:0268.0004/input/input2 U: Uniq= H: Handlers=js0 event2 B: PROP=0 B: EV=1b B: KEY=7 0 0 0 0 0 0 0 0 0 0 0 0 ffff 0 0 0 0 0 0 0 0 0 B: ABS=7fffff00 27 B: MSC=10 $ fftest /dev/input/event2 Force feedback test program. HOLD FIRMLY YOUR WHEEL OR JOYSTICK TO PREVENT DAMAGES Device /dev/input/event2 opened Axes query: Effects: Number of simultaneous effects: 0 Upload effects: Function not implemented Upload effects: Function not implemented Upload effects: Function not implemented Upload effects: Function not implemented Upload effects: Function not implemented Upload effects: Function not implemented Enter effect number, -1 to exit
So the guidance I'm looking here is: Does anyone has Pi 2 running Raspbian (Jessie - November 2015 or Wheezy - May 2015) that can get FFB working on wired DS3 controller?