[Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Hi...i am a new user here. In my case resistors look to be wired backwards.The 3.3 needs to be in place of the 2.2Also the resistors need to be 1/4 watt. Anything bigger than 1/4 wont allow for data communication.I also have noticed running the GPIO pins reduced if not eliminate the left/right force feed back grab.The USB ports is known to be the bottleneck of the PI, taking the main out put through the GPIO pins are a work around to that.
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Anyone got RPI 3 working with the new gimx?
I updated gimx (and I don't know if it is because of gtsport) FFB gets stuck to one effect while using 4,9 kernel and 6,5 gimx. I tried Downgrading the kernel to 4.1 and I lose ffb altogether (but input works).
After some tinkering with usb drivers I tested gimx (again) using usb extention from my rpi hub to pc and it worked fine. so I think it is a software issue.
I'm using CSW v2 in G27 mode. I used to have It kind of working with driveclub but the problem is that I don't remember the kernel version I had.
It is as if gimx crashes as soon as it starts sending ffb data (menu etc is fine).
I updated gimx (and I don't know if it is because of gtsport) FFB gets stuck to one effect while using 4,9 kernel and 6,5 gimx. I tried Downgrading the kernel to 4.1 and I lose ffb altogether (but input works).
After some tinkering with usb drivers I tested gimx (again) using usb extention from my rpi hub to pc and it worked fine. so I think it is a software issue.
I'm using CSW v2 in G27 mode. I used to have It kind of working with driveclub but the problem is that I don't remember the kernel version I had.
It is as if gimx crashes as soon as it starts sending ffb data (menu etc is fine).
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
can we use this tut with arduino leonardo ?
-
- Posts: 4
- Joined: Tue Aug 08, 2017 2:17 pm
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Hi
I just bought a gimx adapter from the website and it doesnt have a push button. I dont know how to set it up to my ps4. I have looked up tutorials online and even the gimx wiki page. The tutorials include a push button. I am going to use a logitech g27. Can anyone help me with my situation. I AM NOT GOOD WITH ANY TECHNICAL TERMS SO PLEASE CAN YOU MAKE IT AS EASY AS POSSIBLE.
Thanks
I just bought a gimx adapter from the website and it doesnt have a push button. I dont know how to set it up to my ps4. I have looked up tutorials online and even the gimx wiki page. The tutorials include a push button. I am going to use a logitech g27. Can anyone help me with my situation. I AM NOT GOOD WITH ANY TECHNICAL TERMS SO PLEASE CAN YOU MAKE IT AS EASY AS POSSIBLE.
Thanks
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Hi,
You actually don't need to change the firmware. The default one works for any Logitech wheel with a PS4.
You actually don't need to change the firmware. The default one works for any Logitech wheel with a PS4.
GIMX creator
-
- Posts: 4
- Joined: Tue Aug 08, 2017 2:17 pm
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Thanks for the reply but i just do not know how to set it up. Can you please tell me what to actually do in order to set it up
Thanks
Thanks
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Do you plan to use a Raspberry Pi or a PC?
GIMX creator
-
- Posts: 4
- Joined: Tue Aug 08, 2017 2:17 pm
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Yes im going to use a PC
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
The following pages of the wiki may be helpfull:
https://gimx.fr/wiki/index.php?title=Installation
https://gimx.fr/wiki/index.php?title=Quick_Start
And here is the main page of the wiki:
https://gimx.fr/wiki/index.php?title=Main_Page
https://gimx.fr/wiki/index.php?title=Installation
https://gimx.fr/wiki/index.php?title=Quick_Start
And here is the main page of the wiki:
https://gimx.fr/wiki/index.php?title=Main_Page
GIMX creator
-
- Posts: 4
- Joined: Tue Aug 08, 2017 2:17 pm
Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi
Right, i managed to make the buttons on the gear on the g27 work. When i go on to the game though, it says that the controller disconnected.