I read all the needed material before posting.
After completing the needed to do Xone driver update: Install the libusbk driver (Xbox One only)
using ZAdig, the launcher did not see anything under the Port.
I used the DIY USB adapter.
Here are the boards I used:
https://www.amazon.com/gp/product/B01LR ... UTF8&psc=1
https://www.amazon.com/gp/product/B01LZ ... UTF8&psc=1
The firmware i used was
firmwares-5.8/EMUXONE/atmega32u4.hex
Here are pic of the DIY USB adapter:
posted image
Please help.
Xone with Teensy 2.0
Re: Xone with Teensy 2.0
Also using GIMX 6.3. I am on a windows 64 bit Desktop PC and did try it also on my Alieanware Laptop Windows X64 with the same results. My desktop will say GIMX has stopped working if i try to run anything but the launcher, example gimx-fpsconfig and then when I click a button to edit it says Gimx has stopped working, same thing if I hit the check button on the launcher...
Re: Xone with Teensy 2.0
Hi,
Did you plug the CP2102 board side to the PC, and the Teensy board to the console?
Did you plug the CP2102 board side to the PC, and the Teensy board to the console?
GIMX creator
Re: Xone with Teensy 2.0
thats correct , teensy to consol other board directly to PC.
I uninstalled everything to start over:
I noticed when I run Zadig it doesnt meet up with what the instructions say:
select the right device:
Console Device name USB ID
Xbox One "Controller" 045E:02D1
Here is what i see:
Am I doing that right?
I uninstalled everything to start over:
I noticed when I run Zadig it doesnt meet up with what the instructions say:
select the right device:
Console Device name USB ID
Xbox One "Controller" 045E:02D1
Here is what i see:
Am I doing that right?
Re: Xone with Teensy 2.0
Another note,
when i uninstalled Gimx 6.3 and then reinstalled it , it didnt run the CP210x driver or the USBDK driver afterward. I dont see anything to delete in the program file or app data or regedit registry either. It keeps the config file as well that I needed to select for download first as well.
Also i did this part the first install time:
"USBDK may cause instability on some systems, therefore it is advised to create a system restore point before installing it.
LibusbK can be used as an alternative. Follow these instructions to use it:
Rename the libusb-1.0.dll file from the C:\Program Files\GIMX folder to libusb-1.0.dll.bk.
Download this libusb package: link.
Open it (with 7zip for example) and extract the libusb-1.0.dll file from the /mingw64/bin/ folder to the C:\Program Files\GIMX folder.
Install the libusbk driver as explained below."
But i skipped it this time, as it says it seems to be optional as described.
when i uninstalled Gimx 6.3 and then reinstalled it , it didnt run the CP210x driver or the USBDK driver afterward. I dont see anything to delete in the program file or app data or regedit registry either. It keeps the config file as well that I needed to select for download first as well.
Also i did this part the first install time:
"USBDK may cause instability on some systems, therefore it is advised to create a system restore point before installing it.
LibusbK can be used as an alternative. Follow these instructions to use it:
Rename the libusb-1.0.dll file from the C:\Program Files\GIMX folder to libusb-1.0.dll.bk.
Download this libusb package: link.
Open it (with 7zip for example) and extract the libusb-1.0.dll file from the /mingw64/bin/ folder to the C:\Program Files\GIMX folder.
Install the libusbk driver as explained below."
But i skipped it this time, as it says it seems to be optional as described.
Re: Xone with Teensy 2.0
Also i noticed that after running the AZdig that the CP2102 is now listed under libusbK instead of COM devices. I would guess this is why i cant select it under the port now when i run the launcher...
Re: Xone with Teensy 2.0
Does my xbox one controller have to be connected to the PC as well? I have read some articles that imply that it does. One in particular states that the newer controllers are incompatible with gimx. I did not read this in the instructions for gimx, did i miss it? I read it many many times...
Re: Xone with Teensy 2.0
Matlo I missed your reply.
OK so I am confused in that part of the installation. What am I supposed to use AZdig for?
It says "It is required to replace the stock controller driver with the libusbk driver."
Does this mean the xbox one controller?
OK so I am confused in that part of the installation. What am I supposed to use AZdig for?
It says "It is required to replace the stock controller driver with the libusbk driver."
Does this mean the xbox one controller?
Re: Xone with Teensy 2.0
OK, so I was able to install my xbox controllers driver it now shows up as "controller" in AZdig. I updated the driver with AZdig, but now get this:
global option -l with value `log.txt'
global option -c with value `XOnePadUsbXinput.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 x86_64
Windows 7 SP1 x64
Kernel version: 6.1 (7601)
windows/async.c:344 async_read_timeout: ReadFile failed: timeout expired.
can't read packet header
gimx.c:208 SDL_main: no adapter detected
any help would be appreciated.
global option -l with value `log.txt'
global option -c with value `XOnePadUsbXinput.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 x86_64
Windows 7 SP1 x64
Kernel version: 6.1 (7601)
windows/async.c:344 async_read_timeout: ReadFile failed: timeout expired.
can't read packet header
gimx.c:208 SDL_main: no adapter detected
any help would be appreciated.