Refresh rate
Refresh rate
From my experience , raspberry pi zero and raspberry pi 3 b+ can't handle default refresh rate 10. Because of this, I have to use command line every time with "-r 20". It would be nice if @Matlo could add a refresh rate option to the main gimx-launcher. It shouldn't be difficult. I hope this gets added in the next gimx update. Thank you. It's the only thing stopping me from using gimx-launcher.
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: Refresh rate
For me, refresh rate 10 makes it very stuttery.
Re: Refresh rate
This is very likely due to a low mouse polling rate. Try adding usbhid.mousepoll=4 to cmdline.txt.
https://www.raspberrypi.org/documentati ... ine-txt.md
https://www.raspberrypi.org/documentati ... ine-txt.md
GIMX creator
Re: Refresh rate
I can't. I use a simple office mouse. Max refresh rate for this mouse is 125hz. But I don't think it's the refresh rate. On a Windows laptop, refresh rate 10 worked fine, but not on raspberry pi zero or raspberry pi 3 b+.
Re: Refresh rate
Did you try? The hardware may support it. If it does not work, also try usbhid.mousepoll=8.
Some firmwares (like EMUG29PS4) run on RPi with a refresh period of 5ms without any issue.
Some firmwares (like EMUG29PS4) run on RPi with a refresh period of 5ms without any issue.
GIMX creator
Re: Refresh rate
I did try and I already have set usbhid.mousepoll to 8.
Re: Refresh rate
Ok, then please open a topic in the support section and provide a log file. Make sure to reproduce the issue while generating the log file.
GIMX creator