Game Input MultipleXer

Hi sorry for the delay I tested it myself to see if I can help you this is the version I installed, I used Raspberry pi imager and selected Raspberry Pi OS legacy version 32 bit Hard to run the two commands to force it to install and install dependencies sudo dpkg --force-overwrite -i gimx_8.0-1_arm...

Thats actually quite strange what Raspberry pi are you using and are you on the latest version of the OS ? I know on the Pi4 they normally had issues with the installer trying to override `/usr/bin/bdaddr This was resolved by forcing an overwrite sudo dpkg --force-overwrite -i gimx_8.0-1_armhf.deb s...

Hi you have to add sudo for apt to work

Hi

Its TX to RX and RX to TX

And make sure your console is powered on before you click start

Ok In the launcher there is an option under the selected config named messages set that to log file and click start it will show a blank box after it exits you will have the log file in notepad as it will auto open. https://drive.google.com/file/d/1kGtEMXmwmm5lQxOGD9DM2IKBib_D973Y/view?usp=sharing h...

Set the messages option to log file click on start when you exit you will get a notepad popup with log file Only time I have seen the failed to packet was when I had a faulty cable from adapter to console so just double check it and make sure console is turned on as it will also generate this error ...

Hi Please generate a log file and add it here Also can you check if the com port is correct for the adapter and the target console is turned on before you start Check your usb cables if you are using any usb hubs try to run it without one just to test You can also double check the wiring to make sur...

Hi

From my experience it does work I have been playing Division 2 on the PS5 with my adapter since I got it. I only play shooters so I am unsure about driving games. But even the outriders PS4 Demo works with GIMX as long as its the PS4 version.

Just want to confirm the firmware loading method you are using, are you doing it from the help menu and choosing update firmware or are you using another method.

Try installing this driver for the CP2102

https://www.silabs.com/documents/public ... Driver.zip

If that fails to work I would suggest you try a live linux distro to test then we can isolate if its a windows issue or the maybe the serial board is faulty