Search found 20 matches

by Kakiharasama
Wed Sep 07, 2016 5:57 am
Forum: GIMX Discussion
Topic: LED Board Specs
Replies: 2
Views: 3347

Re: LED Board Specs

Hi

You can use any LED and a 1K 20% Resistor
by Kakiharasama
Sun May 08, 2016 11:27 am
Forum: Support
Topic: error with DIY usb ps4
Replies: 4
Views: 4488

Re: error with DIY usb ps4

Hi

As far as I know you should not have the 5V pin connected only TX RX and GND

Also you can try to remove and reinstall GIMX and the USBDK drivers
by Kakiharasama
Sun Apr 24, 2016 9:24 am
Forum: Support
Topic: DIY USB adapter not detected
Replies: 10
Views: 8617

Re: DIY USB adapter not detected

Hi Can you post some pictures I just want to see something. If you have a setup where you have header pins soldered then it should not be a problem, the board I used came with pins you had to solder or you can solder directly to the board. But Soldering should give you the best long term performance...
by Kakiharasama
Sat Oct 31, 2015 4:59 am
Forum: Support
Topic: Can not find tutorial for atmega32u4 hex install
Replies: 11
Views: 13646

Re: Can not find tutorial for atmega32u4 hex install

Matlo wrote:I realized that my pro micro runs the bootloader during 8 seconds if I unplug and replug it while keeping the CP2102 plugged and powered.
Do you get such a behaviour?

Thanks Matlo I also get the same result great find ;)
by Kakiharasama
Fri Oct 23, 2015 4:12 am
Forum: Support
Topic: Can not find tutorial for atmega32u4 hex install
Replies: 11
Views: 13646

Re: Can not find tutorial for atmega32u4 hex install

You need to right click it before it exits bootloader mode and update the driver manually. The port it shows in the standard way as you describe it can not be used to program it. My drivers are showing as Arduino Micro in normal mode and Arduino Micro bootloader after the reset button is pressed two...
by Kakiharasama
Thu Oct 22, 2015 3:44 pm
Forum: Support
Topic: Can not find tutorial for atmega32u4 hex install
Replies: 11
Views: 13646

Re: Can not find tutorial for atmega32u4 hex install

I only got it to work with avrdude you need to open device manager and press the button twice and right click on the new device that shows under unknown devices and specify the driver. After that if you press the button twice it will show under com ports
by Kakiharasama
Thu Oct 22, 2015 2:11 pm
Forum: Support
Topic: Can not find tutorial for atmega32u4 hex install
Replies: 11
Views: 13646

Re: Can not find tutorial for atmega32u4 hex install

Any time Malto when I get time I will do a full tutorial with some pics.

Thank you
by Kakiharasama
Thu Oct 22, 2015 6:03 am
Forum: Support
Topic: Can not find tutorial for atmega32u4 hex install
Replies: 11
Views: 13646

Re: Can not find tutorial for atmega32u4 hex install

Hi Don't know if this will help but if you solder a switch to rst and ground and press it twice it should enter bootloader mode so you can program via usb. You also need to install the driver and remember the com port that's assigned to it. Just a quick note that after you press the switch twice it ...
by Kakiharasama
Mon Sep 21, 2015 6:53 am
Forum: Support
Topic: Diy usb problem
Replies: 1
Views: 2486

Re: Diy usb problem

In order to help people are going to want to know your current setup please follow this template to give information.

http://gimx.fr/forum/viewtopic.php?f=5&t=691