[Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Discuss everything to do with GIMX here
JaseSerre
Posts: 1
Joined: Tue Jan 24, 2017 2:58 pm

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by JaseSerre »

Hi...i am a new user here. In my case resistors look to be wired backwards.The 3.3 needs to be in place of the 2.2Also the resistors need to be 1/4 watt. Anything bigger than 1/4 wont allow for data communication.I also have noticed running the GPIO pins reduced if not eliminate the left/right force feed back grab.The USB ports is known to be the bottleneck of the PI, taking the main out put through the GPIO pins are a work around to that.
Shinu
Posts: 5
Joined: Sat Jun 25, 2016 4:26 am

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by Shinu »

Anyone got RPI 3 working with the new gimx?
I updated gimx (and I don't know if it is because of gtsport) FFB gets stuck to one effect while using 4,9 kernel and 6,5 gimx. I tried Downgrading the kernel to 4.1 and I lose ffb altogether (but input works).

After some tinkering with usb drivers I tested gimx (again) using usb extention from my rpi hub to pc and it worked fine. so I think it is a software issue.


I'm using CSW v2 in G27 mode. I used to have It kind of working with driveclub but the problem is that I don't remember the kernel version I had.

It is as if gimx crashes as soon as it starts sending ffb data (menu etc is fine).
bigdeli
Posts: 5
Joined: Wed Jul 13, 2016 10:24 pm

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by bigdeli »

can we use this tut with arduino leonardo ?
Xyed_Haz110
Posts: 4
Joined: Tue Aug 08, 2017 2:17 pm

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by Xyed_Haz110 »

Hi
I just bought a gimx adapter from the website and it doesnt have a push button. I dont know how to set it up to my ps4. I have looked up tutorials online and even the gimx wiki page. The tutorials include a push button. I am going to use a logitech g27. Can anyone help me with my situation. I AM NOT GOOD WITH ANY TECHNICAL TERMS SO PLEASE CAN YOU MAKE IT AS EASY AS POSSIBLE.
Thanks
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by Matlo »

Hi,
You actually don't need to change the firmware. The default one works for any Logitech wheel with a PS4.
GIMX creator
Xyed_Haz110
Posts: 4
Joined: Tue Aug 08, 2017 2:17 pm

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by Xyed_Haz110 »

Thanks for the reply but i just do not know how to set it up. Can you please tell me what to actually do in order to set it up
Thanks
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by Matlo »

Do you plan to use a Raspberry Pi or a PC?
GIMX creator
Xyed_Haz110
Posts: 4
Joined: Tue Aug 08, 2017 2:17 pm

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by Xyed_Haz110 »

Yes im going to use a PC
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by Matlo »

GIMX creator
Xyed_Haz110
Posts: 4
Joined: Tue Aug 08, 2017 2:17 pm

Re: [Tutorial] Logitech G27 (and other wheels) on PS4 using Pi

Post by Xyed_Haz110 »

Right, i managed to make the buttons on the gear on the g27 work. When i go on to the game though, it says that the controller disconnected.
Post Reply