HI
Im trying to setup a DYI adapter using raspberry pi and arduino pro micro.
I have intalled GIMX 7.2 to do so
The problem is that when I try to start GIMX, I allways get the following error:
ERROR: FAILED TO READ PACKET HEADER FROM THE GIMX ADAPTER
I have flashed my AVR board again, checked the wiring and tryed to change TX and RX to see if are mislabelled. Previously I was getting an similar error on async.c but I disabled hciuart and i got rid of it, Im not sure if this is correct.
Any ideas¿? I am performing my tests pluging only AVR board, not connecting G27 neither DS4 but I think the error have nothing to do with those components, right?¿
Thx!
EDIT: I tested my RPI UART using "minicon -D /dev/ttyserial0" and bypassing 8 and 10 pins, so UART looks working fine. Also my PRO micro looks fine as long as it can load correctly firmwares using avrdude.
ERROR: FAILED TO READ PACKET HEADER FROM THE GIMX ADAPTER
Re: ERROR: FAILED TO READ PACKET HEADER FROM THE GIMX ADAPTER
As far as I remember pro micro is on atmega32u4. Please try flashing firmware with gimx-loader.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: ERROR: FAILED TO READ PACKET HEADER FROM THE GIMX ADAPTER
Please post in the support section and provide the details requested here:
viewtopic.php?f=5&t=691
viewtopic.php?f=5&t=691
GIMX creator
Re: ERROR: FAILED TO READ PACKET HEADER FROM THE GIMX ADAPTER
After flashing the leonardo promicro windows cant detect the promicro.
- kaiba_seto2004
- Posts: 553
- Joined: Sat Jul 15, 2017 9:15 am
Re: ERROR: FAILED TO READ PACKET HEADER FROM THE GIMX ADAPTER
Yes this is normal.
Windows won't recognize AVR board after flashing firmware but target console will.
Windows won't recognize AVR board after flashing firmware but target console will.
PS4 enthusiast.