Guys, I think Raspbian or RPI Firmware update messed something up.
Everything was working fine but today after update I can't get it to working order.
I have the same symptoms but my setup was working fine for a long time so far (2 years already)
I even swapped mouse and it's the same on 3 different mice they used to work previously.
I have run GIMX with Curses and there is difference on the right analog. The same goes with pad testing app on Xbox.
While moving mouse, instead of keep the direction it returns to the center straight away and moves that direction again.
Mouse movement is messed after RPi update
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Mouse movement is messed after RPi update
Tried downgrade firmware to recommended one. Still the same issue so I believe it's OS side.
Example:
https://1drv.ms/v/s!ApSHnIZWIxCGlTDbkeLp4uCvfJIB
Example:
https://1drv.ms/v/s!ApSHnIZWIxCGlTDbkeLp4uCvfJIB
Re: Mouse movement is messed after RPi update
This is probably a performance issue due to the RPi.
Try reinstalling the previous system version.
http://downloads.raspberrypi.org/raspbian/images/
Try reinstalling the previous system version.
http://downloads.raspberrypi.org/raspbian/images/
GIMX creator
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Re: Mouse movement is messed after RPi update
...
I'm so stupid.
It turned out it's not RPI update but somehow when I changed mouse settings it changed Polling to 125mhz (mouse side)...
Mouse settings are kept on mouse (chip) but software don't download all settings sometimes when connected.
...but here is new "issue".
When I play and use mouse and keyboard, gamepad connected to GIMX vibrates. I think it's due to GIMX v6.0?
I'm so stupid.
It turned out it's not RPI update but somehow when I changed mouse settings it changed Polling to 125mhz (mouse side)...
Mouse settings are kept on mouse (chip) but software don't download all settings sometimes when connected.
...but here is new "issue".
When I play and use mouse and keyboard, gamepad connected to GIMX vibrates. I think it's due to GIMX v6.0?
Re: Mouse movement is messed after RPi update
I think rumble support was added in GIMX 4.0.
If there is a controller with rumble in the configuration, then the rumble commands are forwarded.
If there is a controller with rumble in the configuration, then the rumble commands are forwarded.
GIMX creator
-
- Posts: 69
- Joined: Sat Feb 23, 2013 4:11 pm
Re: Mouse movement is messed after RPi update
Forgot about it through all 5.X version.
Probably didn't heat through headphones.
Anyways, it's got to have GIMX back.
I can't aim with gamepad.
Probably didn't heat through headphones.
Anyways, it's got to have GIMX back.
I can't aim with gamepad.