OSW gimx

Need help? Ask here and someone will help
Taiki.racing
Posts: 8
Joined: Wed Mar 28, 2018 10:36 am

OSW gimx

Post by Taiki.racing »

I would like to play GTS with OSW and CSP v3. Is there a site etc. that summarizes setup?
Taiki.racing
Posts: 8
Joined: Wed Mar 28, 2018 10:36 am

Re: OSW gimx

Post by Taiki.racing »

Firmware EMUG27PC
Config LogitechG27_G29.xml
joystick not found: Logitech G27 Racing Wheel USB (0)

Is something wrong?
jseyerle
Posts: 13
Joined: Fri Mar 09, 2018 2:55 pm

Re: OSW gimx

Post by jseyerle »

I have osw and he pedals.
All works except traction control and brake bias selection.
Haven't figured out a work around yet.
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: OSW gimx

Post by GoDlike »

Hello,

As there is no premade configuration for OSW wheel then you need to make a new one. You can't use LogitechG27_G29.xml as it's for G27 wheel.

Tutorial about how to do this is available here - https://gimx.fr/wiki/index.php?title=Cr ... igurations

Please share the configuration with us so we can upload it :)

Regards,
Daniel
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Taiki.racing
Posts: 8
Joined: Wed Mar 28, 2018 10:36 am

Re: OSW gimx

Post by Taiki.racing »

Thank you for your reply. Can you share the configuration file?
Taiki.racing
Posts: 8
Joined: Wed Mar 28, 2018 10:36 am

Re: OSW gimx

Post by Taiki.racing »

I understood the setting.
But it does not work. Provide the configuration file. Thank you.

Code: Select all

<?xml version="1.0" encoding="UTF-8"?>

-<root>


-<controller type="G27 PS3" dpi="0" id="1">


-<configuration id="1">

<trigger type="" id="" delay="0" switch_back="no" button_id="" name=""/>

<mouse_options_list/>

<intensity_list/>


-<button_map>


-<button id="abs_axis_2" label="">

<device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>

<event type="button" id="0"/>

</button>


-<button id="abs_axis_3" label="">

<device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>

<event type="button" id="37"/>

</button>


-<button id="abs_axis_5" label="">

<device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>

<event type="button" id="39"/>

</button>


-<button id="abs_axis_4" label="">

<device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>

<event type="button" id="38"/>

</button>


-<button id="abs_axis_6" label="">

<device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>

<event type="button" id="40"/>

</button>

</button_map>


-<axis_map>


-<axis id="rel_axis_0" label="">

<device type="joystick" id="0" name="MMos ForceFeedback 2014"/>

<event type="axis" id="0" shape="" exponent="1.00" multiplier="0.0039" dead_zone="0"/>

</axis>


-<axis id="abs_axis_17" label="">

<device type="joystick" id="0" name="FANATEC ClubSport Pedals V3"/>

<event type="axis" id="0" shape="Circle" exponent="1.00" multiplier="" dead_zone=""/>

</axis>


-<axis id="abs_axis_18" label="">

<device type="joystick" id="0" name="FANATEC ClubSport Pedals V3"/>

<event type="axis" id="1" shape="Circle" exponent="1.00" multiplier="" dead_zone=""/>

</axis>


-<axis id="abs_axis_19" label="">

<device type="joystick" id="0" name="FANATEC ClubSport Pedals V3"/>

<event type="axis" id="2" shape="Circle" exponent="1.00" multiplier="" dead_zone=""/>

</axis>

</axis_map>

<joystick_corrections_list/>

</configuration>

</controller>

</root>
Taiki.racing
Posts: 8
Joined: Wed Mar 28, 2018 10:36 am

Re: OSW gimx

Post by Taiki.racing »

log file

Code: Select all

global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `COM8'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.0 x86_64
Windows 10 (or later) x64
Kernel version: 10.0 (16299)
USB adapter detected, controller type is: G27 PS3.
no pass-through device is needed
using default refresh period: 10.00ms
macros are not available for: joystick PS4 Controller (0)
Timer resolution: min=156250 max=5000 current=5013
0 1522316338.643985
0 1522316338.776839
0 1522316338.786364
0 1522316338.814940
0 1522316338.824465
0 1522316338.833991
0 1522316338.853042
0 1522316338.881617
0 1522316338.948295
0 1522316338.967346
0 1522316339.005447
0 1522316339.024497
0 1522316339.481713
0 1522316339.624593
0 1522316339.738898
0 1522316339.748423
0 1522316339.891303
0 1522316339.910353
0 1522316340.024657
0 1522316340.110385
0 1522316340.996241
0 1522316341.005767
0 1522316341.043868
0 1522316341.062918
0 1522316341.539185
0 1522316341.548710
0 1522316341.567761
0 1522316341.577286
0 1522316341.586812
0 1522316341.596337
0 1522316341.824945
0 1522316341.834470
0 1522316341.872572
0 1522316341.882097
0 1522316342.015452
0 1522316342.024978
0 1522316342.044028
0 1522316342.053553
0 1522316342.148806
0 1522316342.272636
0 1522316342.329788
0 1522316342.339313
0 1522316342.367889
0 1522316342.386939
0 1522316342.396465
0 1522316342.405990
0 1522316343.558556
0 1522316343.577606
0 1522316343.587131
0 1522316343.634758
0 1522316343.663334
0 1522316343.901467
0 1522316343.930044
0 1522316343.949094
0 1522316343.958619
0 1522316343.996721
0 1522316344.025297
0 1522316344.187227
0 1522316344.282481
0 1522316344.339633
0 1522316344.358683
0 1522316344.387259
0 1522316344.415835
0 1522316344.444411
0 1522316344.472987
0 1522316344.501563
0 1522316344.520614
0 1522316344.558715
0 1522316344.587291
0 1522316344.596817
0 1522316344.673019
0 1522316344.730171
0 1522316344.739697
0 1522316344.758747
0 1522316344.815899
0 1522316344.834950
0 1522316344.854001
0 1522316344.977830
0 1522316344.996881
0 1522316345.044507
0 1522316345.101659
0 1522316345.120710
0 1522316345.263590
0 1522316345.301691
0 1522316345.511248
0 1522316345.520774
0 1522316345.530299
0 1522316345.568401
0 1522316345.644603
0 1522316345.711281
0 1522316345.720806
0 1522316345.730331
0 1522316345.749382
0 1522316345.797009
0 1522316345.873211
0 1522316345.892262
0 1522316345.930363
0 1522316345.939889
0 1522316345.997041
0 1522316346.073243
0 1522316346.082769
0 1522316346.092294
0 1522316346.101819
0 1522316346.178022
0 1522316346.215622
0 1522316346.472806
0 1522316346.529958
0 1522316346.568059
0 1522316346.577584
0 1522316346.606161
0 1522316346.634736
0 1522316346.691889
0 1522316346.796667
0 1522316346.815718
0 1522316346.901446
0 1522316346.939547
0 1522316346.958598
0 1522316347.396763
0 1522316347.425339
0 1522316347.463440
0 1522316347.492016
0 1522316347.749200
0 1522316347.768251
0 1522316347.777776
0 1522316347.787302
0 1522316347.834928
0 1522316347.853979
0 1522316347.901606
0 1522316347.939707
0 1522316347.968283
0 1522316347.987334
0 1522316348.006384
0 1522316348.120688
0 1522316348.130214
0 1522316348.358822
0 1522316348.377872
0 1522316348.406448
0 1522316348.425499
0 1522316348.444549
0 1522316348.454075
0 1522316348.463600
0 1522316348.558853
0 1522316348.577904
0 1522316348.806512
0 1522316348.816038
0 1522316348.901765
0 1522316348.920816
0 1522316348.977968
0 1522316349.016070
0 1522316349.073222
0 1522316349.130374
Taiki.racing
Posts: 8
Joined: Wed Mar 28, 2018 10:36 am

Re: OSW gimx

Post by Taiki.racing »

Code: Select all

global option -l with value `log.txt'
DIY USB adapter: gimx --config filename --port portname
  filename: The name of the config file, in the ~/.gimx/config directory (ex: "File name.xml").
  portname: The serial port. Ex: /dev/ttyUSB0 in Linux, COM4 in Windows.
GPP/Cronus/Titan: gimx --config filename --type GPP
  filename: The name of the config file, in the ~/.gimx/config directory (ex: "File name.xml").
Remote GIMX: gimx --config filename --dst IP:port
  filename: The name of the config file, in the ~/.gimx/config directory (ex: "File name.xml").
  IP:port: The destination IP+port. Ex: 127.0.0.1:51914.
Multiple controllers:
  A --bdaddr, --port or --dst argument finishes the current controller options.
  Further non-global options apply to further controller instances.
Controller options:
  --event "control(value)": send controls to the console and exit.
    Names and value ranges: "lstick x", "lstick y", "rstick x", "rstick y": [-128,127]
    "acc x", "acc y", "acc z", "gyro": [-512,511]
    "select", "start", "PS", "l3", "r3": {0, 255}
    "up", "right", "down", "left", "triangle", "circle", "cross", "square", "l1", "r1", "l2", "r2": [0,255]
  --src IP:port: Specifies a source IP+port to listen on. Ex: 127.0.0.1:51914.
Global options:
  These options apply to all controller instances.
  --config filename: The name of the config file, in the ~/.gimx/config directory (ex: "File name.xml").
  --curses: Curses terminal display. Mouse calibration is available through this interface.
  --status: Display controls in the terminal.
  --nograb: Do not grab the mouse cursor.
  --force-updates: Send button+axis status even if there is no change.
  --subpos: Improve stick precision.
  --window-events : Read window events instead of hardware events.
  --keygen key: Generate a key press at gimx startup.
  --refresh n: The refresh period, in ms. Forcing the refresh period is not recommended.
  --btstack: use btstack for the bluetooth connection.
    Btstack is the only available connection method on Windows, and an alternative connection method on Linux.
  --log filename: write messages into a log file instead of the standard output.
    filename: The name of the log file, in the ~/.gimx/log directory (make sure this folder exists).
  --skip_leds: Filter out set led commands from FFB command stream (performance tweak for G27/G29 wheels on small targets).
  --ff_conv: Force OS translation for FFB commands on Windows.
  --timeout value: Exit if controllers are inactive during a given number of minutes.
gimx: unknown option -- debug.adapter
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: OSW gimx

Post by Matlo »

You are using GIMX 6.0 which is a very old version. Please update to latest one.
The easiest way to update is to click on "Help>Update" in gimx-launcher.
(and provide another log file made with the latest version)
GIMX creator
Taiki.racing
Posts: 8
Joined: Wed Mar 28, 2018 10:36 am

Re: OSW gimx

Post by Taiki.racing »

Thank you for your reply.
I tried it with a new version but it does not work.

Code: Select all

global option -l with value `log.txt'
global option -c with value `Mmos.xml'
controller #1: option -p with value `COM8'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 7.2 x86_64
Windows 10 (or later) x64
Kernel version: 10.0 (16299)
GIMX adapter detected, controller type is: G27 PS3.
no pass-through device is needed
Start the game with a dualshock 3, and then reassign game controllers.
using default refresh period: 10.00ms
mouse 0 has name 'HID 準拠マウス' and virtual id 0
mouse 1 has name 'HID 準拠マウス' and virtual id 1
mouse 2 has name 'HID 準拠マウス' and virtual id 2
mouse 3 has name 'Fanatec Wheel Virtual Mouse' and virtual id 0
keyboard 0 has name 'HID キーボード デバイス' and virtual id 0
keyboard 1 has name 'HID キーボード デバイス' and virtual id 1
keyboard 2 has name 'HID キーボード デバイス' and virtual id 2
keyboard 3 has name 'Fanatec Wheel Virtual Keyboard' and virtual id 0
keyboard 4 has name 'HID キーボード デバイス' and virtual id 3
keyboard 5 has name 'HID キーボード デバイス' and virtual id 4
keyboard 6 has name 'HID キーボード デバイス' and virtual id 5
keyboard 7 has name 'HID キーボード デバイス' and virtual id 6
joystick 0 has name 'PS4 Controller' and virtual id 0
joystick 1 has name 'MMos ForceFeedback 2014' and virtual id 0
joystick 2 has name 'Joystick - HOTAS Warthog' and virtual id 0
joystick 3 has name 'HE Sequential Shifter' and virtual id 0
joystick 4 has name 'T-Rudder' and virtual id 0
joystick 5 has name 'FANATEC ClubSport Pedals V3' and virtual id 0
joystick 6 has name 'G-Shark GS-GP702' and virtual id 0
joystick 7 has name 'FANATEC ClubSport Wheel Base' and virtual id 0
Dump of C:\Users\taiitai1031\AppData\Roaming/gimx/config/Mmos.xml:
<?xml version="1.0" encoding="UTF-8"?>
<root>
  <controller id="1" dpi="0" type="G29 PS4">
    <configuration id="1">
      <trigger type="" id="" name="" button_id="" switch_back="no" delay="0"/>
      <mouse_options_list/>
      <intensity_list/>
      <button_map>
        <button id="abs_axis_2" label="">
          <device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>
          <event type="button" id="0"/>
        </button>
        <button id="abs_axis_3" label="">
          <device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>
          <event type="button" id="37"/>
        </button>
        <button id="abs_axis_5" label="">
          <device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>
          <event type="button" id="39"/>
        </button>
        <button id="abs_axis_4" label="">
          <device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>
          <event type="button" id="38"/>
        </button>
        <button id="abs_axis_6" label="">
          <device type="joystick" id="0" name="FANATEC ClubSport Wheel Base"/>
          <event type="button" id="40"/>
        </button>
      </button_map>
      <axis_map>
        <axis id="rel_axis_0" label="">
          <device type="joystick" id="0" name="MMos ForceFeedback 2014"/>
          <event type="axis" id="0" dead_zone="0" multiplier="0.0039" exponent="1.00" shape=""/>
        </axis>
        <axis id="abs_axis_17" label="">
          <device type="joystick" id="0" name="FANATEC ClubSport Pedals V3"/>
          <event type="axis" id="0" dead_zone="" multiplier="" exponent="1.00" shape=""/>
        </axis>
        <axis id="abs_axis_18" label="">
          <device type="joystick" id="0" name="FANATEC ClubSport Pedals V3"/>
          <event type="axis" id="1" dead_zone="" multiplier="" exponent="1.00" shape=""/>
        </axis>
        <axis id="abs_axis_19" label="">
          <device type="joystick" id="0" name="FANATEC ClubSport Pedals V3"/>
          <event type="axis" id="2" dead_zone="" multiplier="" exponent="1.00" shape=""/>
        </axis>
      </axis_map>
      <joystick_corrections_list/>
    </configuration>
  </controller>
</root>
Haptic core has source haptic_source_lg for device 046d:c29b
Haptic core has sink haptic_sink_os for joystick 1 (MMos ForceFeedback 2014)
FFB invert: no
FFB gain: constant=100 spring=100 damper=100
Timer resolution: min=156250 max=5000 current=5013
rounding timer period to 9524
Exiting
Post Reply