I'm pretty confident the method I mentioned a few posts above will work...
The problem here is that you have the Arduino firmware running on the pro micro, which makes the device appear as a COM port. If you unplug it just before the second click on "Validate", and replug it just after, then gimx-loader should see the bootloader COM port appearing. And again, the CP2102 side of the adapter should also be connected to the computer (this is essential to have the bootloader triggered).
Arduino builder error
Re: Arduino builder error
GIMX creator
-
- Posts: 21
- Joined: Thu Aug 23, 2018 2:24 am
Re: Arduino builder error
ok ill give that a shot again. thank you for your replies. much appreciated
-
- Posts: 21
- Joined: Thu Aug 23, 2018 2:24 am
Re: Arduino builder error
Ok yeah that worked, thank you! You cannot use a Xbox 1 controller with audio jack right?
-
- Posts: 21
- Joined: Thu Aug 23, 2018 2:24 am
Re: Arduino builder error
Hello,
You need to use genuine controller so it can authenticate with the console.
You need to use genuine controller so it can authenticate with the console.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: Arduino builder error
https://www.amazon.com/Xbox-One-Wireles ... QTUSS?th=1
You can buy a second-hand one if you want to save a bit.
You can buy a second-hand one if you want to save a bit.
GIMX creator
-
- Posts: 21
- Joined: Thu Aug 23, 2018 2:24 am
Re: Arduino builder error
ok that's not as bad of a price as I thought they'd be. Thank you again for all your help im really looking forward to having this work.Matlo wrote: ↑Mon Aug 27, 2018 7:08 am https://www.amazon.com/Xbox-One-Wireles ... QTUSS?th=1
You can buy a second-hand one if you want to save a bit.