Page 1 of 1

Programmer not responding

Posted: Wed Jan 01, 2020 9:35 pm
by Treskimo
On Windows 10
Trying to emulate Logitech g27 or g29 on PC
Bought the GIMX adapter from GIMX.

I understand default firmware is for PS4 so trying to update firmware to g27pc.

Once the command prompt loads, I keep getting the '...programmer not responding...' error

I've attempted multiple times. Both sides are connected to PC.

Is there any other drivers or anything I need to install?

Re: Programmer not responding

Posted: Wed Jan 01, 2020 9:46 pm
by Matlo
Which side of the adapter are you unplugging/replugging from/to PC USB port? It must be the USB cable side.

Re: Programmer not responding

Posted: Wed Jan 01, 2020 10:21 pm
by Treskimo
I've tried both. Will try again in a sec. Here's console output:

Image
https://drive.google.com/open?id=1-hG5x ... ZmeW-hTj1V

Re: Programmer not responding

Posted: Wed Jan 01, 2020 10:24 pm
by Treskimo
Oh wow it worked that time. Thanks!

Just to be clear for anyone in future (as someone else threw me off by saying it must be the adapter side)..

It is 100% the cable, NOT the adapter that should be re-plugged.