Wiring looks correct (TX to D2, RX to D3).
Were did you download the firmware? Please post the link.
GIMX doesn't detect adapter
Re: GIMX doesn't detect adapter
GIMX creator
Re: GIMX doesn't detect adapter
Thanks! I'll give this a try.kaiba_seto2004 wrote: ↑Wed Nov 22, 2017 10:17 am You can try Bootcamp for installing windows on Mac. I was successful using Gimx on Macbook through bootcamp.
Re: GIMX doesn't detect adapter
I followed the guides in the wiki;
https://gimx.fr/wiki/index.php?title=DI ... or_dummies
https://gimx.fr/wiki/index.php?title=DIY_USB_adapter
both link to http://gimx.fr/download/gimx-firmwares
I also tried to load the firmware that comes with the Gimx installer, as well as https://github.com/matlo/GIMX-firmwares
Re: GIMX doesn't detect adapter
Code: Select all
╭─gcard@spike ~/git/GIMX-firmwares ‹master*›
╰─$ ./genall
Version number? (default: 1)
Making EMUPS4:
* atmega32u4
Making EMUPS3:
* atmega32u4
Making EMUJOYSTICKPS3:
* atmega32u4
emu.c: In function 'SetupHardware':
emu.c:167:3: warning: this 'while' clause does not guard... [-Wmisleading-indentation]
while(!started);
^~~~~
emu.c:169:2: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'while'
USB_Init();
^~~~~~~~
Making EMUG27PS3:
* atmega32u4
Making EMUG29PS4:
* atmega32u4
adding: firmwares-1/ (stored 0%)
adding: firmwares-1/EMUG27PS3/ (stored 0%)
adding: firmwares-1/EMUG27PS3/atmega32u4.hex (deflated 63%)
adding: firmwares-1/EMUG29PS4/ (stored 0%)
adding: firmwares-1/EMUG29PS4/atmega32u4.hex (deflated 63%)
adding: firmwares-1/EMUJOYSTICKPS3/ (stored 0%)
adding: firmwares-1/EMUJOYSTICKPS3/atmega32u4.hex (deflated 62%)
adding: firmwares-1/EMUPS3/ (stored 0%)
adding: firmwares-1/EMUPS3/atmega32u4.hex (deflated 64%)
adding: firmwares-1/EMUPS4/ (stored 0%)
adding: firmwares-1/EMUPS4/atmega32u4.hex (deflated 63%)
╭─gcard@spike ~/git/GIMX-firmwares ‹master*›
╰─$ ls -l
total 72
drwxr-xr-x 8 gcard staff 272 Nov 23 12:12 EMU360
drwxr-xr-x 8 gcard staff 272 Nov 23 11:20 EMUDFPPS2
drwxr-xr-x 8 gcard staff 272 Nov 23 11:20 EMUDFPS2
drwxr-xr-x 8 gcard staff 272 Nov 23 12:14 EMUG27PS3
drwxr-xr-x 8 gcard staff 272 Nov 23 12:14 EMUG29PS4
drwxr-xr-x 8 gcard staff 272 Nov 23 11:20 EMUGTFPS2
drwxr-xr-x 8 gcard staff 272 Nov 23 12:14 EMUJOYSTICKPS3
drwxr-xr-x 7 gcard staff 238 Nov 23 11:20 EMUPS2
drwxr-xr-x 8 gcard staff 272 Nov 23 12:14 EMUPS3
drwxr-xr-x 8 gcard staff 272 Nov 23 12:13 EMUPS4
drwxr-xr-x 8 gcard staff 272 Nov 23 11:20 EMUPS4PAIRING
drwxr-xr-x 16 gcard staff 544 Nov 23 12:13 EMUT300RSPS4
drwxr-xr-x 8 gcard staff 272 Nov 23 12:12 EMUXBOX
drwxr-xr-x 8 gcard staff 272 Nov 23 11:20 EMUXONE
drwxr-xr-x 13 gcard staff 442 Nov 23 11:20 LUFA
drwxr-xr-x 3 gcard staff 102 Nov 23 11:20 PIC
-rw-r--r-- 1 gcard staff 980 Nov 23 11:20 adapter_protocol.h
drwxr-xr-x 7 gcard staff 238 Nov 23 12:14 firmwares-1
-rw-r--r-- 1 gcard staff 23311 Nov 23 12:14 firmwares-1.zip
-rwxr-xr-x 1 gcard staff 716 Nov 23 12:13 genall
-rw-r--r-- 1 gcard staff 2 Nov 23 12:13 version
╭─gcard@spike ~/git/GIMX-firmwares ‹master*›
╰─$ find firmwares-1
firmwares-1
firmwares-1/EMUG27PS3
firmwares-1/EMUG27PS3/atmega32u4.hex
firmwares-1/EMUG29PS4
firmwares-1/EMUG29PS4/atmega32u4.hex
firmwares-1/EMUJOYSTICKPS3
firmwares-1/EMUJOYSTICKPS3/atmega32u4.hex
firmwares-1/EMUPS3
firmwares-1/EMUPS3/atmega32u4.hex
firmwares-1/EMUPS4
firmwares-1/EMUPS4/atmega32u4.hex
Code: Select all
12:23:46.443: File "atmega32u4.hex". 3916 bytes, 12% used
Re: GIMX doesn't detect adapter
I have tested the Teensy with the LED test firmware, and it seems to be working as expected. I would assume that means that my Teensy is legit, but is there anything else that I can do to test the board?
Here is a video of the test. https://photos.app.goo.gl/KHrlpjolD4JmgEeC2
Here is a video of the test. https://photos.app.goo.gl/KHrlpjolD4JmgEeC2
Re: GIMX doesn't detect adapter
I have tested GIMX versions 6.8-6.11, in order to be through. I have re-downloaded the firmware from https://github.com/matlo/GIMX-firmwares/releases, and tried both the G27PS3 and the PS3 FW's.
I'm still seeing the same results, though I have not tried on a different computer yet. I have been too lazy to do the bootcamp thing and install Windows on my MacBook. I suppose that is all that is really left to try and then either order an official adapter, or forgo using my OSW on my PS3. I'm struggling to see how it could be my PC though.
I'm still seeing the same results, though I have not tried on a different computer yet. I have been too lazy to do the bootcamp thing and install Windows on my MacBook. I suppose that is all that is really left to try and then either order an official adapter, or forgo using my OSW on my PS3. I'm struggling to see how it could be my PC though.
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: GIMX doesn't detect adapter
Hi,
I looked at your USB to TTL board,
https://photos.app.goo.gl/L9dOAqHWs5rZeQ522
This was exactly my first board testing Gimx in the past. And I was failed, that board didn't work. Then I tried with other board and gimx worked great.
So you'd better try again with another board. Like this:
I looked at your USB to TTL board,
https://photos.app.goo.gl/L9dOAqHWs5rZeQ522
This was exactly my first board testing Gimx in the past. And I was failed, that board didn't work. Then I tried with other board and gimx worked great.
So you'd better try again with another board. Like this:
PS4 enthusiast.
Re: GIMX doesn't detect adapter
Thanks for the reply, I will order another board and report back!
Re: GIMX doesn't detect adapter
I picked up a new USB UART board, and I'm still seeing the same async connection timeout error. This is the new board http://tinkersphere.com/electronic-comp ... elper.html
Re: GIMX doesn't detect adapter
Maybe the Teensy is defective.
Something you can check is continuity from the CP2102 to the atmega32u4 pins.
The RX/TX/GND pins of the atmega32u4 are described in the datasheet:
http://www.atmel.com/Images/Atmel-7766- ... asheet.pdf
Something you can check is continuity from the CP2102 to the atmega32u4 pins.
The RX/TX/GND pins of the atmega32u4 are described in the datasheet:
http://www.atmel.com/Images/Atmel-7766- ... asheet.pdf
GIMX creator