GIMX doesn't detect adapter
Re: GIMX doesn't detect adapter
I mentioned that I did check the continuity from pin to pin with a multimeter and the cables plugged in. That is what you are suggesting, right?
Re: GIMX doesn't detect adapter
I don't see any other possibility than faulty AVR Board then
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: GIMX doesn't detect adapter
I received my third UART board today after waiting the past 5 weeks for it to arrive. Same error.
Jumped on the PJRC forums to ask for tech help since you mentioned that it was a bad teensy. I found this thread:
https://forum.pjrc.com/threads/35071-Te ... light=gimx
It says that if the blinking LED example works, the board is good. Maybe this is a Windows issue, or something with my MB.
Jumped on the PJRC forums to ask for tech help since you mentioned that it was a bad teensy. I found this thread:
https://forum.pjrc.com/threads/35071-Te ... light=gimx
It says that if the blinking LED example works, the board is good. Maybe this is a Windows issue, or something with my MB.
Re: GIMX doesn't detect adapter
Teensy may be a chinese clone, it does not have to be bad. If I were you would test it on another PC .
You may buy official adapter, it's tested and 100% working. If you prefer DIY then try with something generic on atmega32U4 like Leonardo clone.
You may buy official adapter, it's tested and 100% working. If you prefer DIY then try with something generic on atmega32U4 like Leonardo clone.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: GIMX doesn't detect adapter
I finally broke down and installed Windows 10 via bootcamp. I'm still seeing the same exact error, and the only thing not different is the teensy. I guess ill head over to the PJRC forums and see if someone can help me figure this thing out.
-
- Posts: 1
- Joined: Wed Jan 17, 2018 6:55 am
Re: GIMX doesn't detect adapter
Have you got it to work?
I just have the same problem and can not make it work.
I just have the same problem and can not make it work.