On Windows 10
Trying to emulate Logitech g27 or g29 on PC
Bought the GIMX adapter from GIMX.
I understand default firmware is for PS4 so trying to update firmware to g27pc.
Once the command prompt loads, I keep getting the '...programmer not responding...' error
I've attempted multiple times. Both sides are connected to PC.
Is there any other drivers or anything I need to install?
Programmer not responding
Re: Programmer not responding
Which side of the adapter are you unplugging/replugging from/to PC USB port? It must be the USB cable side.
GIMX creator
Re: Programmer not responding
I've tried both. Will try again in a sec. Here's console output:
https://drive.google.com/open?id=1-hG5x ... ZmeW-hTj1V
https://drive.google.com/open?id=1-hG5x ... ZmeW-hTj1V
Re: Programmer not responding
Oh wow it worked that time. Thanks!
Just to be clear for anyone in future (as someone else threw me off by saying it must be the adapter side)..
It is 100% the cable, NOT the adapter that should be re-plugged.
Just to be clear for anyone in future (as someone else threw me off by saying it must be the adapter side)..
It is 100% the cable, NOT the adapter that should be re-plugged.