DFGT not working on PS4

[sulu_cwru]

Hi all

After I went to option menu of project cars I didn't see the G29 figure and sort of calibration part, instead there was only a PS4 controller pic as
https://drive.google.com/file/d/0By6dCX ... sp=sharing
I think all the connections are good and without hardware or software issue, because I have used gimx played GTA 5 with mouse and keyboard several weeks ago.

Who knows how to solve this??

[yido]

Have u flashed the teensy with the correct g29emu software hex file

[sulu_cwru]

I noticed there are many hex file under EMUG29PS4, what hex file I should load into teensy.

P.S my hardware is teensy 2.0, OS is ubuntu 14.04

[yido]

The hex file is atmega32u4.hex
Then select the logitechdrivingforceGT_G29.xml in the gimx launcher ,not used Ubuntu so not sure the differance as I'm using win 7

[sulu_cwru]

logitechdrivingforceGT_G29.xml was what I used in gimx in launcher, maybe I loaded wrong atmega32u4.hex, I think I need to load again to check. By the way, the project cars I was playing last night is digital version just downloaded and with latest update installed, will this made my failure?

[yido]

It should not make a difference what pcars version u have ,also do you have your dualshock4 connected to the PC and the driver for authentication ,again I'm not sure way it works in Ubuntu, also on windows you need the logitec gaming software installed for the wheel to work ,I followed this guide https://www.gtplanet.net/forum/threads/ ... 625/page-5

[yido]

And make sure the hex file is from the EMUG29PS4 folder in the firmware folder

[sulu_cwru]

It should not make a difference what pcars version u have ,also do you have your dualshock4 connected to the PC and the driver for authentication ,again I'm not sure way it works in Ubuntu, also on windows you need the logitec gaming software installed for the wheel to work ,I followed this guide https://www.gtplanet.net/forum/threads/ ... 625/page-5

What is driver for authentication?

[yido]

Not sure but I think it's this ,libusbk driver
It mentions it near the end of the dummies guide, says its for consoles that need authentication ,might be included in the latest gimx set up in not sure as I did not download it separate ,I just followed the guide and everything worked ,hopefully someone using Ubuntu can help as there might be slight difference with that os I don't know,and have u installed the logitech drivingforce GT PC software from the logitechdrivingforceGT site?

[Matlo]

On Linux there's no need to install any additional driver or software.
The firmware to use with a Teensy 2.0 is the atmega32u4.hex file from the EMUG29PS4 folder.
If you have any further issues, please generate a log file (select "Messages>Log file" before clicking on "Start") and post it.