Page 2 of 4
Re: Using DS4 as a device within gimx config
Posted: Sat Sep 26, 2015 8:42 am
by Matlo
There is almost no change in the new 5.0 firmware.
Could you please double check that it doesn't work?
Re: Using DS4 as a device within gimx config
Posted: Sat Sep 26, 2015 6:12 pm
by onetymeohnly
Ok after having spent several hours figuring out what worked and what doesn't work in my case is that gimx 4.3 with PS3/PS4 firmware 5.0 works, then after upgrading to gimx 5.0, PS3 firmware 5.0 works but not PS4 firmware 5.0. I get
detected usb adapter:ds4
libusb_init: entity not found
no controller was found on the usb buses
adapter_detect failed
when using gimx5/ps4-5. Tested on PS3/PS4
Re: Using DS4 as a device within gimx config
Posted: Sat Sep 26, 2015 8:41 pm
by Matlo
Thanks for your tests. I'll investigate on this.
Re: Using DS4 as a device within gimx config
Posted: Tue Sep 29, 2015 1:11 pm
by Matlo
Hi,
Could you please open a cmd terminal and type (copy-paste) the following commands:
Code: Select all
cd C:\Program Files\UsbDk Runtime Library
UsbDkController.exe -n
and then post the output?
Re: Using DS4 as a device within gimx config
Posted: Wed Sep 30, 2015 1:08 am
by onetymeohnly
Enumerate USB devices
Found 3 USB devices:
0. FilterID: 1, Port: 1, ID: 8087:8009, Configs: 1,
USB\VID_8087&PID_8009 1
Descriptor for configuration #0: size 25
1. FilterID: 2, Port: 1, ID: 8087:8001, Configs: 1,
USB\VID_8087&PID_8001 1
Descriptor for configuration #0: size 25
2. FilterID: 5, Port: 1, ID: 13fd:1340, Configs: 1,
USB\VID_13FD&PID_1340 57442D5743415257313236
Descriptor for configuration #0: size 32
Re: Using DS4 as a device within gimx config
Posted: Wed Sep 30, 2015 6:47 am
by Matlo
I forgot to tell you to connect the DS4 before typing the command.
Was the DS4 connected when you typed the command?
Re: Using DS4 as a device within gimx config
Posted: Wed Sep 30, 2015 5:10 pm
by onetymeohnly
Enumerate USB devices
Found 3 USB devices:
0. FilterID: 1, Port: 1, ID: 8087:8009, Configs: 1, Speed: 3
USB\VID_8087&PID_8009 1
Descriptor for configuration #0: size 25
1. FilterID: 2, Port: 1, ID: 8087:8001, Configs: 1, Speed: 3
USB\VID_8087&PID_8001 1
Descriptor for configuration #0: size 25
2. FilterID: 5, Port: 1, ID: 13fd:1340, Configs: 1, Speed: 3
USB\VID_13FD&PID_1340 57442D574341525731323639
Descriptor for configuration #0: size 32
Edit: Sorry I realized I am doing this on GIMX 4.3. Should I be doing it in 5.0?
Re: Using DS4 as a device within gimx config
Posted: Wed Sep 30, 2015 7:00 pm
by Matlo
Yes please do this after installing GIMX 5.0. Please also check that you still have the error, and post the entire GIMX output.
Re: Using DS4 as a device within gimx config
Posted: Wed Sep 30, 2015 10:46 pm
by onetymeohnly
option -c with value 'Battlefield4.xml'
option -p with value 'COM3'
status flag is set
subpos flag is set
force_updates flag is set
Detected USB adapter: DS4.
libusb_init: Entity not found.
No controller was found on USB buses.
adapter_detect failed
Enumerate USB devices
Found 2 USB devices:
0. FilterID: 1, Port: 1, ID: 8087:8009, Configs: 1, Speed: 3
USB\VID_8087&PID_8009 1
Descriptor for configuration #0: size 25
1. FilterID: 5, Port: 1, ID: 13fd:1340, Configs: 1, Speed: 3
USB\VID_13FD&PID_1340 57442D574341525731323639
Descriptor for configuration #0: size 32
Re: Using DS4 as a device within gimx config
Posted: Thu Oct 01, 2015 1:12 pm
by Matlo
Did you install GIMX x86_64 or i386?