Page 2 of 3
Re: PS4 - manual & conf
Posted: Thu Apr 10, 2014 6:53 pm
by DrSpace
Matlo,
I've tried the options you indicabas, although the above does not really do what had shown that he had come to try and indicate your instructions.
I fail to understand that I'm running or step that is missing to make it work.
Under steps and repetitions, but never get it to work or activate.
http://imageshack.com/a/img196/6745/5b39.jpg
Code: Select all
unix@iunix:~$ sudo ./gimx-ps4-helper.sh
[sudo] password for unix:
sudo: ./gimx-ps4-helper.sh: orden no encontrada
unix@iunix:~$ sudo ./gimx-ps4-helper.sh
sudo: ./gimx-ps4-helper.sh: orden no encontrada
unix@iunix:~$ cd GIMX/
unix@iunix:~/GIMX$ git pull
Already up-to-date.
unix@iunix:~/GIMX$ clear
unix@iunix:~/GIMX$ sudo ./gimx-ps4-helper.sh
Unplug any Dualshock 4.
Unplug any teensy.
Unpug the bluetooth dongle.
Then press enter.
Plug the bluetooth dongle.
The bluetooth dongle address is 00:15:83:36:30:6C.
The bluetooth hci number is 0.
Plug the DS4 with a USB cable.
The DS4 address is A4:15:66:83:98:58.
Unplug the DS4.
Plug the teensy.
Unplug the teensy.
Plug the teensy to the PS4, and wait a few seconds.
Then plug the teensy back to the PC.
The PS4 address is B0:05:94:68:96:4E.
Everything was successful: setting dongle link keys.
To run gimx, type:
gimx -t DS4 -c config.xml -h 0 -b B0:05:94:68:96:4E
unix@iunix:~/GIMX$ sudo service bluetooth stop
bluetooth stop/waiting
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
Test...
Code: Select all
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$ sudo service bluetooth stop
stop: Unknown instance:
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$ sudo service bluetooth stop
stop: Unknown instance:
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ sudo ./gimx-ps4-helper.sh
Unplug any Dualshock 4.
Unplug any teensy.
Unpug the bluetooth dongle.
Then press enter.
Plug the bluetooth dongle.
The bluetooth dongle address is 00:15:83:36:30:6C.
The bluetooth hci number is 0.
Plug the DS4 with a USB cable.
The DS4 address is A4:15:66:83:98:58.
Unplug the DS4.
Plug the teensy.
Unplug the teensy.
Plug the teensy to the PS4, and wait a few seconds.
Then plug the teensy back to the PC.
The PS4 address is B0:05:94:68:96:4E.
Everything was successful: setting dongle link keys.
To run gimx, type:
gimx -t DS4 -c config.xml -h 0 -b B0:05:94:68:96:4E
unix@iunix:~/GIMX$ sudo service bluetooth stop
stop: Unknown instance:
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$
....
https://imagizer.imageshack.us/v2/769x5 ... 6/5b39.jpg
Re: PS4 - manual & conf
Posted: Thu Apr 10, 2014 7:40 pm
by Matlo
Code: Select all
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
When you are at this point you just have to power on the DS4. This is explicitly said in the instructions:
Code: Select all
Start the DS4. It should connect to GIMX, which in turn should connect to the PS4.
Re: PS4 - manual & conf
Posted: Thu Apr 10, 2014 7:51 pm
by DrSpace
When I'm in the process I start following the DS4 command or log the PS button = "x"?
Code: Select all
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
Which bluetooth would you recommend? me the following bluetooth that I have:
SITECOM
Code: Select all
unix@iunix:~/GIMX$ hciconfig -a hci0
hci0: Type: BR/EDR Bus: USB
BD Address: 00:09:DD:50:86:80 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN AUTH ENCRYPT
RX bytes:669 acl:0 sco:0 events:43 errors:0
TX bytes:492 acl:0 sco:0 commands:42 errors:0
Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'CSR8510 Nanosira M2272'
Class: 0x002508
Service Classes: Unspecified
Device Class: Peripheral, Gamepad
HCI Version: 4.0 (0x6) Revision: 0x1d86
LMP Version: 4.0 (0x6) Subversion: 0x1d86
Manufacturer: Cambridge Silicon Radio (10)
SWEEX - Micro adapter Class 1 (Bluecore4)
Code: Select all
unix@iunix:~/GIMX$ hciconfig -a hci0
hci0: Type: BR/EDR Bus: USB
BD Address: 00:15:83:36:30:6C ACL MTU: 384:8 SCO MTU: 64:8
UP RUNNING PSCAN
RX bytes:980 acl:0 sco:0 events:42 errors:0
TX bytes:650 acl:0 sco:0 commands:41 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'Bluetooth2.1+EDR CLASS1'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 2.1 (0x4) Revision: 0x149c
LMP Version: 2.1 (0x4) Subversion: 0x149c
Manufacturer: Cambridge Silicon Radio (10)
SMC - Networks (old bluetooth)
Code: Select all
unix@iunix:~/GIMX$ hciconfig -a hci0
hci0: Type: BR/EDR Bus: USB
BD Address: 00:11:B1:07:F0:29 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN
RX bytes:483 acl:0 sco:0 events:20 errors:0
TX bytes:80 acl:0 sco:0 commands:19 errors:0
Features: 0xff 0xff 0x8f 0xf8 0x18 0x18 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'CSR - bc3'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 1.2 (0x2) Revision: 0x512
LMP Version: 1.2 (0x2) Subversion: 0x512
Manufacturer: Cambridge Silicon Radio (10)
Thanks
Re: PS4 - manual & conf
Posted: Thu Apr 10, 2014 7:57 pm
by Matlo
I believe you don't understand how it works.
You have to turn on the real DS4 so that it connects to GIMX.
GIMX needs to have a real DS4 connected all the time.
Re: PS4 - manual & conf
Posted: Thu Apr 10, 2014 8:02 pm
by DrSpace
Ok, sorry for the headaches but needed to be sure and understand these steps.
Again I try, I modified the post above you at that bluetooth you recommend me and should work for the 3 that I have.
Re: PS4 - manual & conf
Posted: Thu Apr 10, 2014 8:11 pm
by DrSpace
I have the DS4 control connected at all times and I'm in the following situation:
Code: Select all
unix@iunix:~/GIMX$ sudo ./gimx-ps4-helper.sh
Unplug any Dualshock 4.
Unplug any teensy.
Unpug the bluetooth dongle.
Then press enter.
Plug the bluetooth dongle.
The bluetooth dongle address is 00:09:DD:50:86:80.
The bluetooth hci number is 0.
Plug the DS4 with a USB cable.
The DS4 address is A4:15:66:83:98:58.
Unplug the DS4.
Plug the teensy.
Unplug the teensy.
Plug the teensy to the PS4, and wait a few seconds.
Then plug the teensy back to the PC.
The PS4 address is B0:05:94:68:96:4E.
Everything was successful: setting dongle link keys.
To run gimx, type:
gimx -t DS4 -c config.xml -h 0 -b B0:05:94:68:96:4E
unix@iunix:~/GIMX$ sudo service bluetooth stop
stop: Unknown instance:
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
I keep trying ... and different bluetooth ..
Re: PS4 - manual & conf
Posted: Thu Apr 10, 2014 8:39 pm
by DrSpace
Matlo, many thanks ... got!
I will change the settings and try to play and see how it works.
Video demostration:
http://youtu.be/VDxsECzETFE
Thanks for your patience;)
Problem: must connect the DS4 as you say after running GIMX
Re: PS4 - manual & conf
Posted: Sat Apr 12, 2014 12:16 pm
by DrSpace
Matlo,
to use the micro as I ought to do? button and select the shared, that option is displayed to change me?
Thanks!
Re: PS4 - manual & conf
Posted: Sat Apr 12, 2014 5:06 pm
by Matlo
The micro that you plug in the DS4 can't be used, but it's possible to use a usb headset like the G35 from Logitech.
Re: PS4 - manual & conf
Posted: Sun Apr 13, 2014 12:30 pm
by DrSpace
That name has the button "click" of the touchpad?
How I can configure the touchpad button?
thank you!
