Game Input MultipleXer

Matlo wrote:Do you still have the green cable connected to DTR?
As I said in an earlier post, it should be connected to GND...

GND Teensy -> green cable -> GND CP2102
D2 Teensy -> blue cable -> RXD CP2102
D3 Teensy -> purple cable -> TXD CP2102

Hi Matlo, no sorry that pic is old. the connections are ok.
but I have the same problerm as ever

option -l with value `log.txt'
option -c with value `LogitechG25_G29.xml'
option -p with value `COM3'
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
native mode is already enabled for HID device \\?\hid#vid_046d&pid_c299#7&3b8789cb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (PID=c299)
ReadFile failed: timeout expired.
can't read packet header
No controller detected.
adapter_detect failed

w10 config check say: g25 racing wheel not found


option -l with value `log.txt'
option -c with value `LogitechG25_W10_G29.xml'
option -p with value `COM3'
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
native mode is already enabled for HID device \\?\hid#vid_046d&pid_c299#7&3b8789cb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (PID=c299)
ReadFile failed: timeout expired.
can't read packet header
No controller detected.
adapter_detect failed


Edit: I'd notice something, before turn on the ps4, on CP there are 3 led on. the big red one e 2 yellow. when i turn on the ps4 the 2 yellow leds turns off. It's meaning something?

@Fennec maybe could be that... i should try to buy a ft232...
Which kind do you have?

Did you disable power saving?
http://gimx.fr/wiki/index.php?title=Ins ... SB_devices

yes I did.

Motoko wrote: @Fennec maybe could be that... i should try to buy a ft232...
Which kind do you have?

At about 3 EUR per FT232 an acceptable risk...
http://www.amazon.de/SODIAL-FT232RL-Mod ... ul+5V+3.3V

I really don't know what the issue with my CP2102 is, it did work fine and I'm quite certain the hardware did not get damaged. Would give it a try...

FWIW I bought two serial adaptors and one of them started smoking and now isn't recognized by windows. So, I'd be careful about leaving them plugged in and order a couple for a backup!

Fennec wrote:
I really don't know what the issue with my CP2102 is, it did work fine and I'm quite certain the hardware did not get damaged. Would give it a try...

Fennec, My friend, you are the winner!!! It was the fucking Cp2102!! Just tried driveclub and it work!!!



Now I'm busy but tonight i'll try Pcars.



@Matlo, Thank you for the support, really appreciated!

It's good to read you got it to work, this means I'm not the guilty one

Ok, It works well, I need to edit the config cause missing some buttons (l2 r2 r3).

I would Ask something Matlo. Should I need to change the lag setting or something else in the advanced options of the usb converter?

Which options are you talking about?

This isn't mine, taken on google, but i was talking about those setting.