Page 1 of 3
[Solved][GIMX PS4] Problem on Windows 7
Posted: Wed Aug 27, 2014 11:56 am
by inviictzz-_-
Hi Matlo the first of all thx for this great proyect! I have this problem when i star to play a game in Windows 7:
libusb_submit_transfer: Input/Output Error.
adapter_forward_data_out failed
In Linux Mint 17 i dont have any problem, thx matlo.
Re: Problem on Windows 7
Posted: Wed Aug 27, 2014 5:05 pm
by Matlo
Hi,
From the error I'm assuming you're using GIMX with a DIY USB adapter and a PS4.
Do you have a DS4 connected with a USB cable all the time?
Re: Problem on Windows 7
Posted: Wed Aug 27, 2014 6:01 pm
by inviictzz-_-
Yep always connected to the pc and turn off the DS4
I had That problem in Windows 8.1 too.
Re: Problem on Windows 7
Posted: Wed Aug 27, 2014 6:35 pm
by Matlo
Does it stop working? How much time does it take to appear? Does it happen periodically?
Re: Problem on Windows 7
Posted: Wed Aug 27, 2014 6:51 pm
by inviictzz-_-
Normally stop working every 4-5 sec.
Re: Problem on Windows 7
Posted: Wed Aug 27, 2014 7:06 pm
by Matlo
Maybe the USB cable is defective?
Re: Problem on Windows 7
Posted: Wed Aug 27, 2014 7:24 pm
by inviictzz-_-
I Will to try with a different That one thx for your time Matlo!
Re: Problem on Windows 7
Posted: Thu Aug 28, 2014 1:08 am
by gobbledygook
hi.
I have same problem.(Win7, 64bit)
official USB cable equipped with ferrite core or other more short USB cable, GIMX application stop(libusb_submit_transfer: Input/Output Error. )
this probelm is fail communication with DS4?
my DS4 model is CUH-ZCT1J
Thanks for reading to the end my poor english.
Re: Problem on Windows 7
Posted: Thu Aug 28, 2014 1:55 am
by inviictzz-_-
hello again with the same components (DS4, cables, etc) in linux mint 17 I have no problem but in windows 7 32 bits the error persists, i bloked Windows defender and no antivirus the same result. Thx Matlo.
Re: Problem on Windows 7
Posted: Thu Aug 28, 2014 5:55 am
by Matlo
Hi,
Please post the following details:
- AVR USB board: Teensy, Arduino Leonardo, other?
- USB to UART adapter: CP2102, FT232RL, PL2303, other?
- driver version for the USB to UART adapter?