Game Input MultipleXer

Posted: **Wed Sep 28, 2016 11:30 am**

I installed ubuntu 14.04 with gimx 5.9, G27 with cable DS4
When I start error, see the log :

global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.9 x86_64
Ubuntu 14.04.4 LTS
Linux 4.2.0-27-generic #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 x86_64
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 005: ID 054c:05c4 Sony Corp.
Bus 002 Device 004: ID 046d:c29b Logitech, Inc. G27 Racing Wheel
Bus 002 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/12p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=ftdi_sio, 12M
|__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/12p, 480M
native mode is already enabled for HID device 02:03 (PID=c29b)
Detected USB adapter: G29 PS4.
Reset sent to the adapter.
using default refresh period: 5.00ms
macros are not available for: joystick Sony Computer Entertainment Wireless Controller (0)
closing unused uhid joysticks... done
Warning: can't open macro directory /home/tiago//.gimx//macros/
0 1475058926.842668
src/linux/async.c:269 write: only 4 written (requested 66)
src/linux/async.c:266 write failed with error: Resource temporarily unavailable
Exiting
closing uhid joysticks (it may take a few seconds)

I execute command lsusb :

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 005: ID 054c:05c4 Sony Corp.
Bus 002 Device 004: ID 046d:c29b Logitech, Inc. G27 Racing Wheel
Bus 002 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

Posted: **Wed Sep 28, 2016 12:04 pm**

Hi,
Does the dmesg command show any error after reproducing the issue?

Posted: **Wed Sep 28, 2016 3:16 pm**

Code: Select all

 dmesg 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-27-generic (buildd@lcy01-23) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 (Ubuntu 4.2.0-27.32~14.04.1-generic 4.2.8-ckt1)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=b8a7e453-3f38-4bc9-a491-c916ccfe3d29 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dbfeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dbff0000-0x00000000dbffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010adfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x10ae00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR variable ranges disabled:
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] MTRR: Disabled
[    0.000000] CPU MTRRs all blank - virtualized system.
[    0.000000] e820: last_pfn = 0xdbff0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[    0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[    0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x10ac00000-0x10adfffff]
[    0.000000]  [mem 0x10ac00000-0x10adfffff] page 2M
[    0.000000] BRK [0x01ff6000, 0x01ff6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x10abfffff]
[    0.000000]  [mem 0x100000000-0x10abfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0xc0000000-0xdbfeffff]
[    0.000000]  [mem 0xc0000000-0xdbdfffff] page 2M
[    0.000000]  [mem 0xdbe00000-0xdbfeffff] page 4k
[    0.000000] BRK [0x01ff7000, 0x01ff7fff] PGTABLE
[    0.000000] BRK [0x01ff8000, 0x01ff8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbfffffff] page 2M
[    0.000000] RAMDISK: [mem 0x359fa000-0x36cf4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX  )
[    0.000000] ACPI: XSDT 0x00000000DBFF0040 00004C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000DBFF0110 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000DBFF0530 002118 (v01 VBOX   VBOXBIOS 00000002 INTL 20100528)
[    0.000000] ACPI: FACS 0x00000000DBFF0240 000040
[    0.000000] ACPI: FACS 0x00000000DBFF0240 000040
[    0.000000] ACPI: APIC 0x00000000DBFF0280 000054 (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
[    0.000000] ACPI: HPET 0x00000000DBFF02E0 000038 (v01 VBOX   VBOXHPET 00000001 ASL  00000061)
[    0.000000] ACPI: MCFG 0x00000000DBFF0320 00003C (v01 VBOX   VBOXMCFG 00000001 ASL  00000061)
[    0.000000] ACPI: SSDT 0x00000000DBFF0360 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000010adfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x10adf9000-0x10adfdfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 1:adf5001, primary cpu clock
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880106800000-ffff88010a3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000010adfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dbfeffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000010adfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000010adfffff]
[    0.000000] On node 0 totalpages: 945550
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14016 pages used for memmap
[    0.000000]   DMA32 zone: 897008 pages, LIFO batch:31
[    0.000000]   Normal zone: 696 pages used for memmap
[    0.000000]   Normal zone: 44544 pages, LIFO batch:7
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbff0000-0xdbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xfffbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[    0.000000] e820: [mem 0xdc000000-0xfffbffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88010aa00000 s96728 r8192 d30248 u2097152
[    0.000000] pcpu-alloc: s96728 r8192 d30248 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 930753
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=b8a7e453-3f38-4bc9-a491-c916ccfe3d29 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3618404K/3782200K available (7940K kernel code, 1243K rwdata, 3816K rodata, 1468K init, 1292K bss, 163796K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 1999.999 MHz processor
[    3.755054] Calibrating delay loop (skipped) preset value.. 3999.99 BogoMIPS (lpj=7999996)
[    3.755058] pid_max: default: 32768 minimum: 301
[    3.755065] ACPI: Core revision 20150619
[    3.756230] ACPI: All ACPI Tables successfully acquired
[    3.756249] Security Framework initialized
[    3.756274] AppArmor: AppArmor initialized
[    3.756275] Yama: becoming mindful.
[    3.757861] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    3.761278] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    3.761599] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    3.761604] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    3.761761] Initializing cgroup subsys blkio
[    3.761764] Initializing cgroup subsys memory
[    3.761770] Initializing cgroup subsys devices
[    3.761772] Initializing cgroup subsys freezer
[    3.761774] Initializing cgroup subsys net_cls
[    3.761776] Initializing cgroup subsys perf_event
[    3.761777] Initializing cgroup subsys net_prio
[    3.761779] Initializing cgroup subsys hugetlb
[    3.761871] CPU: Physical Processor ID: 0
[    3.761889] mce: CPU supports 0 MCE banks
[    3.761916] process: using mwait in idle threads
[    3.761921] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    3.761922] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    3.786112] Freeing SMP alternatives memory: 28K (ffffffff81ea7000 - ffffffff81eae000)
[    3.795971] ftrace: allocating 30981 entries in 122 pages
[    3.850447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    3.949287] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
[    3.949290] APIC delta adjusted to PM-Timer: 6276356 (6089304)
[    3.949346] smpboot: CPU0: Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
[    3.949398] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[    3.949412] KVM setup paravirtual spinlock
[    3.950057] x86: Booted up 1 node, 1 CPUs
[    3.950059] smpboot: Total of 1 processors activated (3999.99 BogoMIPS)
[    3.950379] devtmpfs: initialized
[    3.954034] evm: security.selinux
[    3.954036] evm: security.SMACK64
[    3.954037] evm: security.SMACK64EXEC
[    3.954038] evm: security.SMACK64TRANSMUTE
[    3.954039] evm: security.SMACK64MMAP
[    3.954040] evm: security.ima
[    3.954040] evm: security.capability
[    3.954161] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    3.954231] pinctrl core: initialized pinctrl subsystem
[    3.954346] RTC time: 10:30:01, date: 09/28/16
[    3.954462] NET: Registered protocol family 16
[    3.954617] cpuidle: using governor ladder
[    3.954619] cpuidle: using governor menu
[    3.954736] ACPI: bus type PCI registered
[    3.954738] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    3.954849] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
[    3.954876] PCI: not using MMCONFIG
[    3.954877] PCI: Using configuration type 1 for base access
[    3.956164] ACPI: Added _OSI(Module Device)
[    3.956166] ACPI: Added _OSI(Processor Device)
[    3.956167] ACPI: Added _OSI(3.0 _SCP Extensions)
[    3.956168] ACPI: Added _OSI(Processor Aggregator Device)
[    3.956877] ACPI: Executed 1 blocks of module-level executable AML code
[    3.958650] ACPI: Interpreter enabled
[    3.958655] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    3.958658] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    3.958660] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
[    3.958663] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580)
[    3.958668] ACPI: (supports S0 S5)
[    3.958669] ACPI: Using IOAPIC for interrupt routing
[    3.958796] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
[    3.958985] PCI: MMCONFIG at [mem 0xdc000000-0xdfffffff] reserved in ACPI motherboard resources
[    3.959003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    3.963781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    3.963787] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    3.963791] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    3.963842] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    3.964090] PCI host bridge to bus 0000:00
[    3.964093] pci_bus 0000:00: root bus resource [bus 00-ff]
[    3.964095] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    3.964097] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    3.964098] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    3.964100] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xffdfffff window]
[    3.964157] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[    3.967743] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[    3.984177] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    3.986208] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[    3.989931] pci 0000:00:03.0: reg 0x18: [io  0xd000-0xd007]
[    3.997897] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[    3.999831] pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
[    4.001737] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[    4.003606] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[    4.011411] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[    4.011557] pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
[    4.011646] pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
[    4.012326] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[    4.013319] pci 0000:00:18.0: [8086:2448] type 01 class 0x060401
[    4.013815] pci 0000:00:19.0: [8086:2448] type 01 class 0x060401
[    4.014301] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    4.014907] pci 0000:00:1f.0: quirk: [io  0x8000-0x807f] claimed by ICH6 ACPI/GPIO/TCO
[    4.015166] pci 0000:00:1f.1: [8086:7111] type 00 class 0x01018a
[    4.015686] pci 0000:00:1f.1: reg 0x20: [io  0xe000-0xe00f]
[    4.015906] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    4.015908] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    4.015909] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    4.015911] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    4.016156] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    4.018239] pci 0000:00:1f.2: reg 0x10: [io  0xe010-0xe017]
[    4.020068] pci 0000:00:1f.2: reg 0x14: [io  0xe018-0xe01b]
[    4.022008] pci 0000:00:1f.2: reg 0x18: [io  0xe020-0xe027]
[    4.024369] pci 0000:00:1f.2: reg 0x1c: [io  0xe028-0xe02b]
[    4.026331] pci 0000:00:1f.2: reg 0x20: [io  0xe030-0xe03f]
[    4.028283] pci 0000:00:1f.2: reg 0x24: [mem 0xf0900000-0xf0901fff]
[    4.031230] pci 0000:00:1f.4: [106b:003f] type 00 class 0x0c0310
[    4.033251] pci 0000:00:1f.4: reg 0x10: [mem 0xf0902000-0xf0902fff]
[    4.045128] pci 0000:00:1f.5: [8086:265c] type 00 class 0x0c0320
[    4.047154] pci 0000:00:1f.5: reg 0x10: [mem 0xf0903000-0xf0903fff]
[    4.059230] pci 0000:00:18.0: PCI bridge to [bus 01] (subtractive decode)
[    4.059311] pci 0000:00:18.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    4.059313] pci 0000:00:18.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    4.059315] pci 0000:00:18.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    4.059317] pci 0000:00:18.0:   bridge window [mem 0xdc000000-0xffdfffff window] (subtractive decode)
[    4.059844] pci 0000:00:19.0: PCI bridge to [bus 02] (subtractive decode)
[    4.059914] pci 0000:00:19.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    4.059916] pci 0000:00:19.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    4.059917] pci 0000:00:19.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    4.059919] pci 0000:00:19.0:   bridge window [mem 0xdc000000-0xffdfffff window] (subtractive decode)
[    4.061352] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[    4.061584] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10 11)
[    4.061687] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
[    4.061789] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[    4.061947] ACPI: Enabled 2 GPEs in block 00 to 07
[    4.062192] vgaarb: setting as boot device: PCI:0000:00:02.0
[    4.062195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    4.062198] vgaarb: loaded
[    4.062199] vgaarb: bridge control possible 0000:00:02.0
[    4.063913] SCSI subsystem initialized
[    4.063984] libata version 3.00 loaded.
[    4.064022] ACPI: bus type USB registered
[    4.064047] usbcore: registered new interface driver usbfs
[    4.064056] usbcore: registered new interface driver hub
[    4.064068] usbcore: registered new device driver usb
[    4.064248] PCI: Using ACPI for IRQ routing
[    4.086026] PCI: pci_cache_line_size set to 64 bytes
[    4.086310] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    4.086319] e820: reserve RAM buffer [mem 0xdbff0000-0xdbffffff]
[    4.086320] e820: reserve RAM buffer [mem 0x10ae00000-0x10bffffff]
[    4.086465] NetLabel: Initializing
[    4.086466] NetLabel:  domain hash size = 128
[    4.086467] NetLabel:  protocols = UNLABELED CIPSOv4
[    4.086478] NetLabel:  unlabeled traffic allowed by default
[    4.086598] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    4.086627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    4.086631] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    4.089750] clocksource: Switched to clocksource kvm-clock
[    4.099259] AppArmor: AppArmor Filesystem Enabled
[    4.099330] pnp: PnP ACPI init
[    4.099426] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    4.099518] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[    4.099588] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.099680] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    4.099683] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    4.099851] system 00:04: [mem 0xdc000000-0xdfffffff] has been reserved
[    4.099854] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.100060] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.100814] pnp: PnP ACPI: found 6 devices
[    4.106897] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.106964] pci 0000:00:18.0: PCI bridge to [bus 01]
[    4.107072] pci 0000:00:19.0: PCI bridge to [bus 02]
[    4.107176] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    4.107178] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    4.107180] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    4.107181] pci_bus 0000:00: resource 7 [mem 0xdc000000-0xffdfffff window]
[    4.107183] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    4.107185] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    4.107186] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    4.107188] pci_bus 0000:01: resource 7 [mem 0xdc000000-0xffdfffff window]
[    4.107189] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    4.107191] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    4.107192] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    4.107194] pci_bus 0000:02: resource 7 [mem 0xdc000000-0xffdfffff window]
[    4.107255] NET: Registered protocol family 2
[    4.107450] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    4.107523] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    4.107580] TCP: Hash tables configured (established 32768 bind 32768)
[    4.107604] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    4.107618] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    4.107667] NET: Registered protocol family 1
[    4.107706] pci 0000:00:02.0: Video device with shadowed ROM
[    4.109791] PCI: CLS 0 bytes, default 64
[    4.109881] Trying to unpack rootfs image as initramfs...
[    4.438236] Freeing initrd memory: 19436K (ffff8800359fa000 - ffff880036cf5000)
[    4.438280] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.438282] software IO TLB [mem 0xd7ff0000-0xdbff0000] (64MB) mapped at [ffff8800d7ff0000-ffff8800dbfeffff]
[    4.438365] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer
[    4.438366] hw unit of domain pp0-core 2^-0 Joules
[    4.438367] hw unit of domain package 2^-0 Joules
[    4.438368] hw unit of domain pp1-gpu 2^-0 Joules
[    4.438424] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x0
[    4.438481] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.438565] Scanning for low memory corruption every 60 seconds
[    4.438826] futex hash table entries: 256 (order: 2, 16384 bytes)
[    4.438842] Initialise system trusted keyring
[    4.438861] audit: initializing netlink subsys (disabled)
[    4.438875] audit: type=2000 audit(1475058607.110:1): initialized
[    4.439174] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.440539] zpool: loaded
[    4.440541] zbud: loaded
[    4.440700] VFS: Disk quotas dquot_6.6.0
[    4.440729] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.442667] fuse init (API version 7.23)
[    4.442793] Key type big_key registered
[    4.443005] Key type asymmetric registered
[    4.443013] Asymmetric key parser 'x509' registered
[    4.443030] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    4.443058] io scheduler noop registered
[    4.443061] io scheduler deadline registered (default)
[    4.443096] io scheduler cfq registered
[    4.443264] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.443270] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.443301] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    4.443302] vesafb: scrolling: redraw
[    4.443304] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.443315] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
[    4.443401] Console: switching to colour frame buffer device 80x30
[    4.443409] fb0: VESA VGA frame buffer device
[    4.443780] ACPI: AC Adapter [AC] (on-line)
[    4.443841] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    4.443845] ACPI: Power Button [PWRF]
[    4.443951] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[    4.443953] ACPI: Sleep Button [SLPF]
[    4.444096] GHES: HEST is not enabled!
[    4.445231] ACPI: Battery Slot [BAT0] (battery present)
[    4.445288] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.468385] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.469999] Linux agpgart interface v0.103
[    4.471626] brd: module loaded
[    4.472269] loop: module loaded
[    4.472422] ata_piix 0000:00:1f.1: version 2.13
[    4.472895] scsi host0: ata_piix
[    4.472954] scsi host1: ata_piix
[    4.472983] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[    4.472985] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[    4.473051] libphy: Fixed MDIO Bus: probed
[    4.473054] tun: Universal TUN/TAP device driver, 1.6
[    4.473055] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.473398] PPP generic driver version 2.4.2
[    4.473471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.473476] ehci-pci: EHCI PCI platform driver
[    4.474018] ehci-pci 0000:00:1f.5: EHCI Host Controller
[    4.474026] ehci-pci 0000:00:1f.5: new USB bus registered, assigned bus number 1
[    4.474273] ehci-pci 0000:00:1f.5: irq 23, io mem 0xf0903000
[    4.485818] ehci-pci 0000:00:1f.5: USB 2.0 started, EHCI 1.00
[    4.485880] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.485882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.485883] usb usb1: Product: EHCI Host Controller
[    4.485885] usb usb1: Manufacturer: Linux 4.2.0-27-generic ehci_hcd
[    4.485886] usb usb1: SerialNumber: 0000:00:1f.5
[    4.486018] hub 1-0:1.0: USB hub found
[    4.486023] hub 1-0:1.0: 12 ports detected
[    4.486256] ehci-platform: EHCI generic platform driver
[    4.486271] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.486277] ohci-pci: OHCI PCI platform driver
[    4.486807] ohci-pci 0000:00:1f.4: OHCI PCI host controller
[    4.486814] ohci-pci 0000:00:1f.4: new USB bus registered, assigned bus number 2
[    4.486850] ohci-pci 0000:00:1f.4: irq 23, io mem 0xf0902000
[    4.542142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.542145] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.542147] usb usb2: Product: OHCI PCI host controller
[    4.542148] usb usb2: Manufacturer: Linux 4.2.0-27-generic ohci_hcd
[    4.542150] usb usb2: SerialNumber: 0000:00:1f.4
[    4.542286] hub 2-0:1.0: USB hub found
[    4.542304] hub 2-0:1.0: 12 ports detected
[    4.542790] ohci-platform: OHCI generic platform driver
[    4.542804] uhci_hcd: USB Universal Host Controller Interface driver
[    4.542864] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    4.543357] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.543362] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.543471] mousedev: PS/2 mouse device common for all mice
[    4.543846] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    4.544262] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    4.544364] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[    4.544373] i2c /dev entries driver
[    4.544443] device-mapper: uevent: version 1.0.3
[    4.544504] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    4.544518] ledtrig-cpu: registered to indicate activity on CPUs
[    4.544593] PCCT header not found.
[    4.544771] NET: Registered protocol family 10
[    4.544930] NET: Registered protocol family 17
[    4.544941] Key type dns_resolver registered
[    4.545142] Loading compiled-in X.509 certificates
[    4.545983] Loaded X.509 cert 'Build time autogenerated kernel key: 736e2f9ea1b4728a15ac169b1869267e1128d6e8'
[    4.546014] registered taskstats version 1
[    4.546034] zswap: loading zswap
[    4.546036] zswap: using zbud pool
[    4.546040] zswap: using lzo compressor
[    4.547833] Key type trusted registered
[    4.550967] Key type encrypted registered
[    4.550974] AppArmor: AppArmor sha1 policy hashing enabled
[    4.550978] ima: No TPM chip found, activating TPM-bypass!
[    4.550998] evm: HMAC attrs: 0x1
[    4.551427]   Magic number: 0:660:528
[    4.551504] rtc_cmos 00:02: setting system clock to 2016-09-28 10:30:02 UTC (1475058602)
[    4.551563] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.551564] EDD information not available.
[    4.551607] PM: Hibernation image not present or could not be loaded.
[    4.630066] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[    4.630466] ata2.00: configured for UDMA/33
[    4.630898] scsi 1:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
[    4.631442] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[    4.631444] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.631544] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.631681] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    4.631995] Freeing unused kernel memory: 1468K (ffffffff81d38000 - ffffffff81ea7000)
[    4.631997] Write protecting the kernel read-only data: 12288k
[    4.632186] Freeing unused kernel memory: 240K (ffff8800017c4000 - ffff880001800000)
[    4.632291] Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000)
[    4.645995] systemd-udevd[99]: starting version 204
[    4.673005] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    4.673007] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    5.033947] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    5.099139] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:45:cf:f3
[    5.099147] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    5.099176] ahci 0000:00:1f.2: version 3.0
[    5.099914] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    5.100090] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    5.100093] ahci 0000:00:1f.2: flags: 64bit ncq stag only ccc 
[    5.101172] scsi host2: ahci
[    5.101276] ata3: SATA max UDMA/133 abar m8192@0xf0900000 port 0xf0900100 irq 24
[    5.242780] usb 2-1: new full-speed USB device number 2 using ohci-pci
[    5.418209] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.418398] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[    5.418401] ata3.00: 31169232 sectors, multi 128: LBA48 NCQ (depth 31/32)
[    5.418585] ata3.00: configured for UDMA/133
[    5.418677] scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
[    5.418876] sd 2:0:0:0: [sda] 31169232 512-byte logical blocks: (15.9 GB/14.8 GiB)
[    5.418908] sd 2:0:0:0: [sda] Write Protect is off
[    5.418910] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.418925] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.419099] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    5.425654]  sda: sda1 sda2 < sda5 >
[    5.426361] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.437839] tsc: Refined TSC clocksource calibration: 1994.346 MHz
[    5.437844] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x397ea2499f2, max_idle_ns: 881590595197 ns
[    5.506702] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.525223] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[    5.525227] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    5.525229] usb 2-1: Product: USB Tablet
[    5.525230] usb 2-1: Manufacturer: VirtualBox
[    7.698828] floppy0: no floppy controllers found
[    7.698881] work still pending
[    7.816514] random: init urandom read with 41 bits of entropy available
[    7.864773] init: plymouth-upstart-bridge main process (151) terminated with status 1
[    7.864795] init: plymouth-upstart-bridge main process ended, respawning
[    7.884116] init: plymouth-upstart-bridge main process (161) terminated with status 1
[    7.884129] init: plymouth-upstart-bridge main process ended, respawning
[    7.895621] init: plymouth-upstart-bridge main process (164) terminated with status 1
[    7.895633] init: plymouth-upstart-bridge main process ended, respawning
[    9.162567] Adding 3780604k swap on /dev/sda5.  Priority:-1 extents:1 across:3780604k FS
[    9.175525] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.362256] systemd-udevd[296]: starting version 204
[    9.489406] lp: driver loaded but no devices found
[    9.536213] ppdev: user-space parallel port driver
[    9.575668] vboxguest: module verification failed: signature and/or required key missing - tainting kernel
[    9.641255] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[    9.656185] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[    9.661951] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input5
[    9.664776] vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[    9.664819] vboxguest: Successfully loaded version 5.0.26 (interface 0x00010004)
[    9.835374] random: nonblocking pool is initialized
[    9.908754] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.909646] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
[    9.930544] Bluetooth: Core ver 2.20
[    9.930680] NET: Registered protocol family 31
[    9.930681] Bluetooth: HCI device and connection manager initialized
[    9.930684] Bluetooth: HCI socket layer initialized
[    9.930686] Bluetooth: L2CAP socket layer initialized
[    9.930691] Bluetooth: SCO socket layer initialized
[    9.950110] intel_rng: FWH not detected
[    9.959191] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
[    9.963953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.963955] Bluetooth: BNEP filters: protocol multicast
[    9.963960] Bluetooth: BNEP socket layer initialized
[    9.971429] audit: type=1400 audit(1475058607.916:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=413 comm="apparmor_parser"
[    9.971435] audit: type=1400 audit(1475058607.916:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=413 comm="apparmor_parser"
[    9.971440] audit: type=1400 audit(1475058607.916:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
[    9.971828] audit: type=1400 audit(1475058607.916:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=413 comm="apparmor_parser"
[    9.971833] audit: type=1400 audit(1475058607.916:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
[    9.972037] audit: type=1400 audit(1475058607.916:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
[    9.985896] Bluetooth: RFCOMM TTY layer initialized
[    9.985903] Bluetooth: RFCOMM socket layer initialized
[    9.985909] Bluetooth: RFCOMM ver 1.11
[   10.047354] leds_ss4200: no LED devices found
[   10.105548] audit: type=1400 audit(1475058608.048:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=432 comm="apparmor_parser"
[   10.105555] audit: type=1400 audit(1475058608.048:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=432 comm="apparmor_parser"
[   10.105899] audit: type=1400 audit(1475058608.048:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=432 comm="apparmor_parser"
[   10.138543] [drm] Initialized drm 1.1.0 20060810
[   10.510817] hidraw: raw HID events driver (C) Jiri Kosina
[   10.540476] [drm] VRAM 00c00000
[   10.546894] [TTM] Zone  kernel: Available graphics memory: 1819928 kiB
[   10.546896] [TTM] Initializing pool allocator
[   10.546901] [TTM] Initializing DMA pool allocator
[   10.551109] checking generic (e0000000 130000) vs hw (e0000000 1000000)
[   10.551111] fb: switching to vboxdrmfb from VESA VGA
[   10.551148] Console: switching to colour dummy device 80x25
[   10.551319] fbcon: vboxdrmfb (fb0) is primary device
[   10.551408] Console: switching to colour frame buffer device 100x37
[   10.551419] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[   10.551421] vboxvideo 0000:00:02.0: registered panic notifier
[   10.551424] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[   10.564396] usbcore: registered new interface driver usbhid
[   10.564399] usbhid: USB HID core driver
[   10.565232] AVX version of gcm_enc/dec engaged.
[   10.565235] AES CTR mode by8 optimization enabled
[   10.778020] audit: type=1400 audit(1475058608.720:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=551 comm="apparmor_parser"
[   10.950625] init: failsafe main process (524) killed by TERM signal
[   11.081580] intel_rapl: no valid rapl domains found in package 0
[   11.392601] snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
[   11.413601] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.414942] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   11.415360] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.427427] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:1f.4/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input7
[   11.428203] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:1f.4-1/input0
[   11.772197] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[   12.990109] floppy0: no floppy controllers found
[   12.990165] work still pending
[   13.428326] init: plymouth-upstart-bridge main process ended, respawning
[   13.545637] vboxsf: Successfully loaded version 5.0.26 (interface 0x00010004)
[   17.526869] VBoxService 5.0.26 r108824 (verbosity: 0) linux.amd64 (Jul 18 2016 13:51:44) release log
[   17.526869] 00:00:00.000090 main     Log opened 2016-09-28T10:30:15.475295000Z
[   17.526931] 00:00:00.000187 main     OS Product: Linux
[   17.526967] 00:00:00.000229 main     OS Release: 4.2.0-27-generic
[   17.527002] 00:00:00.000264 main     OS Version: #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016
[   17.527045] 00:00:00.000298 main     Executable: /opt/VBoxGuestAdditions-5.0.26/sbin/VBoxService
[   17.527045] 00:00:00.000300 main     Process ID: 1802
[   17.527045] 00:00:00.000300 main     Package type: LINUX_64BITS_GENERIC
[   17.536934] 00:00:00.010163 main     5.0.26 r108824 started. Verbose level = 0
[   17.558288] 00:00:00.031517 automount vbsvcAutoMountWorker: Shared folder 'tiagovaz' was mounted to '/media/sf_tiagovaz'
[   17.819693] init: plymouth-stop pre-start process (1859) terminated with status 1
[   19.934741] ISO 9660 Extensions: Microsoft Joliet Level 3
[   19.950191] ISO 9660 Extensions: RRIP_1991A
[  157.958216] usb 2-2: new full-speed USB device number 3 using ohci-pci
[  158.258315] usb 2-2: New USB device found, idVendor=0403, idProduct=6001
[  158.258320] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  158.258321] usb 2-2: Product: FT232R USB UART
[  158.258323] usb 2-2: Manufacturer: FTDI
[  158.258324] usb 2-2: SerialNumber: A50285BI
[  158.292002] usbcore: registered new interface driver usbserial
[  158.292177] usbcore: registered new interface driver usbserial_generic
[  158.292356] usbserial: USB Serial support registered for generic
[  158.300596] usbcore: registered new interface driver ftdi_sio
[  158.303046] usbserial: USB Serial support registered for FTDI USB Serial Device
[  158.304096] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected
[  158.305295] usb 2-2: Detected FT232RL
[  158.317203] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0
[  161.484318] usb 2-3: new full-speed USB device number 4 using ohci-pci
[  161.788344] usb 2-3: New USB device found, idVendor=046d, idProduct=c29b
[  161.788348] usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  161.788350] usb 2-3: Product: G27 Racing Wheel
[  161.876836] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.0002/input/input8
[  161.934668] logitech 0003:046D:C29B.0002: input,hidraw1: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[  161.934764] logitech 0003:046D:C29B.0002: Force feedback support for Logitech Gaming Wheels
[  164.317619] usb 2-4: new full-speed USB device number 5 using ohci-pci
[  164.607909] usb 2-4: New USB device found, idVendor=054c, idProduct=05c4
[  164.607913] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  164.607915] usb 2-4: Product: Wireless Controller
[  164.607917] usb 2-4: Manufacturer: Sony Computer Entertainment
[  164.805930] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.0003/input/input9
[  164.863116] sony 0003:054C:05C4.0003: input,hidraw2: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[  297.643122] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.0004/input/input10
[  297.643374] logitech 0003:046D:C29B.0004: input,hidraw1: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[  297.643462] logitech 0003:046D:C29B.0004: Force feedback support for Logitech Gaming Wheels
[  297.854711] usb 2-4: reset full-speed USB device number 5 using ohci-pci
[  298.127154] input: G27 Racing Wheel as /devices/virtual/misc/uhid/0006:046D:C29B.0005/input/input11
[  298.127381] hid-generic 0006:046D:C29B.0005: input,hidraw1: <UNKNOWN> HID v1.11 Multi-Axis Controller [G27 Racing Wheel] on 
[  298.794073] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.0006/input/input12
[  298.794304] logitech 0003:046D:C29B.0006: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[  298.794403] logitech 0003:046D:C29B.0006: Force feedback support for Logitech Gaming Wheels
[  298.965169] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.0007/input/input13
[  298.965410] sony 0003:054C:05C4.0007: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[  327.382889] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.0008/input/input14
[  327.383088] logitech 0003:046D:C29B.0008: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[  327.383176] logitech 0003:046D:C29B.0008: Force feedback support for Logitech Gaming Wheels
[  327.623578] usb 2-4: reset full-speed USB device number 5 using ohci-pci
[  327.867849] input: G27 Racing Wheel as /devices/virtual/misc/uhid/0006:046D:C29B.0009/input/input15
[  327.868071] hid-generic 0006:046D:C29B.0009: input,hidraw1: <UNKNOWN> HID v1.11 Multi-Axis Controller [G27 Racing Wheel] on 
[  329.832324] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.000A/input/input16
[  329.832489] logitech 0003:046D:C29B.000A: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[  329.832581] logitech 0003:046D:C29B.000A: Force feedback support for Logitech Gaming Wheels
[  330.001048] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.000B/input/input17
[  330.001178] sony 0003:054C:05C4.000B: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[  958.897144] audit_printk_skb: 150 callbacks suppressed
[  958.897147] audit: type=1400 audit(1475059557.939:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2767 comm="apparmor_parser"
[  958.897155] audit: type=1400 audit(1475059557.939:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2767 comm="apparmor_parser"
[  958.897512] audit: type=1400 audit(1475059557.939:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2767 comm="apparmor_parser"
[16834.761567] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.000C/input/input18
[16834.761770] logitech 0003:046D:C29B.000C: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[16834.761864] logitech 0003:046D:C29B.000C: Force feedback support for Logitech Gaming Wheels
[16840.469993] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.000D/input/input19
[16840.470209] logitech 0003:046D:C29B.000D: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[16840.470304] logitech 0003:046D:C29B.000D: Force feedback support for Logitech Gaming Wheels
[16840.710516] usb 2-4: reset full-speed USB device number 5 using ohci-pci
[16840.957767] input: G27 Racing Wheel as /devices/virtual/misc/uhid/0006:046D:C29B.000E/input/input20
[16840.957952] hid-generic 0006:046D:C29B.000E: input,hidraw1: <UNKNOWN> HID v1.11 Multi-Axis Controller [G27 Racing Wheel] on 
[16843.527228] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.000F/input/input21
[16843.527479] logitech 0003:046D:C29B.000F: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[16843.527580] logitech 0003:046D:C29B.000F: Force feedback support for Logitech Gaming Wheels
[16843.697637] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.0010/input/input22
[16843.697930] sony 0003:054C:05C4.0010: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[16858.639900] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.0011/input/input23
[16858.696071] sony 0003:054C:05C4.0011: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[16973.218534] systemd-hostnamed[3100]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

Posted: **Wed Sep 28, 2016 3:21 pm**

The FT232RL chip is a fake one:
http://www.starlino.com/ftdi-chip-real- ... thers.html

Posted: **Thu Sep 29, 2016 10:33 am**

I change adapter to CP2102

gimx log

Code: Select all

global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.9 x86_64
Ubuntu 14.04.4 LTS
Linux 4.2.0-27-generic #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 x86_64
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 002 Device 004: ID 054c:05c4 Sony Corp. 
Bus 002 Device 003: ID 046d:c29b Logitech, Inc. G27 Racing Wheel
Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/12p, 12M
    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 5, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/12p, 480M
native mode is already enabled for HID device 02:02 (PID=c29b)
Detected USB adapter: G29 PS4.
using default refresh period: 5.00ms
macros are not available for: joystick Sony Computer Entertainment Wireless Controller (0)
closing unused uhid joysticks... done
Warning: can't open macro directory /home/tiago//.gimx//macros/
0 1475144947.026699
0 1475144948.234964, wheel (-5), gear shifter 4 (255)
0 1475144951.549903, wheel (-5), PS (255), gear shifter 4 (255)
0 1475144951.979860, wheel (-5), gear shifter 4 (255)
0 1475144952.985185, wheel (-5), cross (255), gear shifter 4 (255)
0 1475144953.206653, wheel (-5), gear shifter 4 (255)
0 1475144958.389977, wheel (-5), right (255), gear shifter 4 (255)
0 1475144958.509917, wheel (-5), gear shifter 4 (255)
0 1475144959.525129, wheel (-5), right (255), gear shifter 4 (255)
0 1475144959.669953, wheel (-5), gear shifter 4 (255)
0 1475144959.860252, wheel (-5), right (255), gear shifter 4 (255)
0 1475144959.994941, wheel (-5), gear shifter 4 (255)
0 1475144960.150069, wheel (-5), right (255), gear shifter 4 (255)
0 1475144960.284827, wheel (-5), gear shifter 4 (255)
0 1475144961.119905, wheel (-5), left (255), gear shifter 4 (255)
0 1475144961.260003, wheel (-5), gear shifter 4 (255)
0 1475144961.474979, wheel (-5), left (255), gear shifter 4 (255)
0 1475144961.590017, wheel (-5), gear shifter 4 (255)
0 1475144962.069960, wheel (-5), cross (255), gear shifter 4 (255)
0 1475144962.235000, wheel (-5), gear shifter 4 (255)
0 1475144968.635043, wheel (-17), gear shifter 4 (255)
0 1475144972.360089, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144972.545062, wheel (-17), gear shifter 4 (255)
0 1475144973.384949, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144973.539942, wheel (-17), gear shifter 4 (255)
0 1475144974.834934, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144975.000114, wheel (-17), gear shifter 4 (255)
0 1475144981.359960, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144981.600016, wheel (-17), gear shifter 4 (255)
0 1475144988.035356, wheel (-17), left (255), gear shifter 4 (255)
0 1475144988.209974, wheel (-17), gear shifter 4 (255)
0 1475144989.694952, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144989.865153, wheel (-17), gear shifter 4 (255)
0 1475144992.610183, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144992.815015, wheel (-17), gear shifter 4 (255)
0 1475144993.680069, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144993.880128, wheel (-17), gear shifter 4 (255)
0 1475144999.489917, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144999.644875, wheel (-17), gear shifter 4 (255)
0 1475145012.965018, wheel (-17), cross (255), gear shifter 4 (255)
0 1475145013.139926, wheel (-17), gear shifter 4 (255)
0 1475145014.229918, wheel (-17), cross (255), gear shifter 4 (255)
0 1475145014.405093, wheel (-17), gear shifter 4 (255)
0 1475145019.589959, wheel (-17), triangle (255), gear shifter 4 (255)
0 1475145019.769924, wheel (-17), gear shifter 4 (255)
src/linux/async.c:269 write: only 4 written (requested 66)
src/linux/async.c:266 write failed with error: Resource temporarily unavailable
Exiting
closing uhid joysticks (it may take a few seconds)

command dmesg

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-27-generic (buildd@lcy01-23) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 (Ubuntu 4.2.0-27.32~14.04.1-generic 4.2.8-ckt1)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=b8a7e453-3f38-4bc9-a491-c916ccfe3d29 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dbfeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dbff0000-0x00000000dbffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010adfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x10ae00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR variable ranges disabled:
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] MTRR: Disabled
[    0.000000] CPU MTRRs all blank - virtualized system.
[    0.000000] e820: last_pfn = 0xdbff0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[    0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[    0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x10ac00000-0x10adfffff]
[    0.000000]  [mem 0x10ac00000-0x10adfffff] page 2M
[    0.000000] BRK [0x01ff6000, 0x01ff6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x10abfffff]
[    0.000000]  [mem 0x100000000-0x10abfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0xc0000000-0xdbfeffff]
[    0.000000]  [mem 0xc0000000-0xdbdfffff] page 2M
[    0.000000]  [mem 0xdbe00000-0xdbfeffff] page 4k
[    0.000000] BRK [0x01ff7000, 0x01ff7fff] PGTABLE
[    0.000000] BRK [0x01ff8000, 0x01ff8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbfffffff] page 2M
[    0.000000] RAMDISK: [mem 0x359fa000-0x36cf4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX  )
[    0.000000] ACPI: XSDT 0x00000000DBFF0040 00004C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000DBFF0110 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000DBFF0530 002118 (v01 VBOX   VBOXBIOS 00000002 INTL 20100528)
[    0.000000] ACPI: FACS 0x00000000DBFF0240 000040
[    0.000000] ACPI: FACS 0x00000000DBFF0240 000040
[    0.000000] ACPI: APIC 0x00000000DBFF0280 000054 (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
[    0.000000] ACPI: HPET 0x00000000DBFF02E0 000038 (v01 VBOX   VBOXHPET 00000001 ASL  00000061)
[    0.000000] ACPI: MCFG 0x00000000DBFF0320 00003C (v01 VBOX   VBOXMCFG 00000001 ASL  00000061)
[    0.000000] ACPI: SSDT 0x00000000DBFF0360 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000010adfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x10adf9000-0x10adfdfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 1:adf5001, primary cpu clock
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880106800000-ffff88010a3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000010adfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dbfeffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000010adfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000010adfffff]
[    0.000000] On node 0 totalpages: 945550
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14016 pages used for memmap
[    0.000000]   DMA32 zone: 897008 pages, LIFO batch:31
[    0.000000]   Normal zone: 696 pages used for memmap
[    0.000000]   Normal zone: 44544 pages, LIFO batch:7
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbff0000-0xdbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xfffbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[    0.000000] e820: [mem 0xdc000000-0xfffbffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88010aa00000 s96728 r8192 d30248 u2097152
[    0.000000] pcpu-alloc: s96728 r8192 d30248 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 930753
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=b8a7e453-3f38-4bc9-a491-c916ccfe3d29 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3618404K/3782200K available (7940K kernel code, 1243K rwdata, 3816K rodata, 1468K init, 1292K bss, 163796K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 1999.999 MHz processor
[    6.142077] Calibrating delay loop (skipped) preset value.. 3999.99 BogoMIPS (lpj=7999996)
[    6.142081] pid_max: default: 32768 minimum: 301
[    6.142087] ACPI: Core revision 20150619
[    6.143216] ACPI: All ACPI Tables successfully acquired
[    6.143338] Security Framework initialized
[    6.143350] AppArmor: AppArmor initialized
[    6.143352] Yama: becoming mindful.
[    6.146829] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    6.152550] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    6.153054] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    6.153063] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    6.153353] Initializing cgroup subsys blkio
[    6.153357] Initializing cgroup subsys memory
[    6.153367] Initializing cgroup subsys devices
[    6.153370] Initializing cgroup subsys freezer
[    6.153373] Initializing cgroup subsys net_cls
[    6.153375] Initializing cgroup subsys perf_event
[    6.153378] Initializing cgroup subsys net_prio
[    6.153381] Initializing cgroup subsys hugetlb
[    6.153531] CPU: Physical Processor ID: 0
[    6.153560] mce: CPU supports 0 MCE banks
[    6.153599] process: using mwait in idle threads
[    6.153608] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    6.153610] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    6.178446] Freeing SMP alternatives memory: 28K (ffffffff81ea7000 - ffffffff81eae000)
[    6.191411] ftrace: allocating 30981 entries in 122 pages
[    6.250180] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    6.349935] smpboot: CPU0: Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
[    6.349980] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[    6.349995] KVM setup paravirtual spinlock
[    6.350713] x86: Booted up 1 node, 1 CPUs
[    6.350715] smpboot: Total of 1 processors activated (3999.99 BogoMIPS)
[    6.351105] devtmpfs: initialized
[    6.354953] evm: security.selinux
[    6.354955] evm: security.SMACK64
[    6.354956] evm: security.SMACK64EXEC
[    6.354957] evm: security.SMACK64TRANSMUTE
[    6.354958] evm: security.SMACK64MMAP
[    6.354958] evm: security.ima
[    6.354959] evm: security.capability
[    6.355088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    6.355162] pinctrl core: initialized pinctrl subsystem
[    6.355286] RTC time: 10:27:50, date: 09/29/16
[    6.355408] NET: Registered protocol family 16
[    6.355573] cpuidle: using governor ladder
[    6.355575] cpuidle: using governor menu
[    6.355697] ACPI: bus type PCI registered
[    6.355699] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    6.355818] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
[    6.355820] PCI: not using MMCONFIG
[    6.355821] PCI: Using configuration type 1 for base access
[    6.357156] ACPI: Added _OSI(Module Device)
[    6.357158] ACPI: Added _OSI(Processor Device)
[    6.357159] ACPI: Added _OSI(3.0 _SCP Extensions)
[    6.357160] ACPI: Added _OSI(Processor Aggregator Device)
[    6.357947] ACPI: Executed 1 blocks of module-level executable AML code
[    6.361014] ACPI: Interpreter enabled
[    6.361025] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    6.361032] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    6.361037] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
[    6.361042] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580)
[    6.361051] ACPI: (supports S0 S5)
[    6.361054] ACPI: Using IOAPIC for interrupt routing
[    6.361312] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
[    6.361701] PCI: MMCONFIG at [mem 0xdc000000-0xdfffffff] reserved in ACPI motherboard resources
[    6.361735] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    6.369001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    6.369007] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    6.369011] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    6.369063] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    6.369311] PCI host bridge to bus 0000:00
[    6.369314] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.369316] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    6.369317] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    6.369319] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    6.369320] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xffdfffff window]
[    6.369379] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[    6.371725] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[    6.385045] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    6.387119] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[    6.390784] pci 0000:00:03.0: reg 0x18: [io  0xd000-0xd007]
[    6.400210] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[    6.403305] pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
[    6.406175] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[    6.408546] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[    6.416651] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[    6.416801] pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
[    6.416890] pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
[    6.417609] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[    6.418612] pci 0000:00:18.0: [8086:2448] type 01 class 0x060401
[    6.419099] pci 0000:00:19.0: [8086:2448] type 01 class 0x060401
[    6.419615] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    6.420239] pci 0000:00:1f.0: quirk: [io  0x8000-0x807f] claimed by ICH6 ACPI/GPIO/TCO
[    6.420502] pci 0000:00:1f.1: [8086:7111] type 00 class 0x01018a
[    6.421026] pci 0000:00:1f.1: reg 0x20: [io  0xe000-0xe00f]
[    6.421249] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    6.421250] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    6.421252] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    6.421253] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    6.421502] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    6.423657] pci 0000:00:1f.2: reg 0x10: [io  0xe010-0xe017]
[    6.425594] pci 0000:00:1f.2: reg 0x14: [io  0xe018-0xe01b]
[    6.427548] pci 0000:00:1f.2: reg 0x18: [io  0xe020-0xe027]
[    6.429377] pci 0000:00:1f.2: reg 0x1c: [io  0xe028-0xe02b]
[    6.431364] pci 0000:00:1f.2: reg 0x20: [io  0xe030-0xe03f]
[    6.433143] pci 0000:00:1f.2: reg 0x24: [mem 0xf0900000-0xf0901fff]
[    6.435560] pci 0000:00:1f.4: [106b:003f] type 00 class 0x0c0310
[    6.437537] pci 0000:00:1f.4: reg 0x10: [mem 0xf0902000-0xf0902fff]
[    6.449483] pci 0000:00:1f.5: [8086:265c] type 00 class 0x0c0320
[    6.451623] pci 0000:00:1f.5: reg 0x10: [mem 0xf0903000-0xf0903fff]
[    6.463952] pci 0000:00:18.0: PCI bridge to [bus 01] (subtractive decode)
[    6.464030] pci 0000:00:18.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    6.464032] pci 0000:00:18.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    6.464034] pci 0000:00:18.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    6.464035] pci 0000:00:18.0:   bridge window [mem 0xdc000000-0xffdfffff window] (subtractive decode)
[    6.464565] pci 0000:00:19.0: PCI bridge to [bus 02] (subtractive decode)
[    6.464636] pci 0000:00:19.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    6.464637] pci 0000:00:19.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    6.464639] pci 0000:00:19.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    6.464640] pci 0000:00:19.0:   bridge window [mem 0xdc000000-0xffdfffff window] (subtractive decode)
[    6.466940] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[    6.467519] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10 11)
[    6.467746] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
[    6.467992] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[    6.468297] ACPI: Enabled 2 GPEs in block 00 to 07
[    6.468745] vgaarb: setting as boot device: PCI:0000:00:02.0
[    6.468750] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    6.468755] vgaarb: loaded
[    6.468758] vgaarb: bridge control possible 0000:00:02.0
[    6.472188] SCSI subsystem initialized
[    6.472317] libata version 3.00 loaded.
[    6.472402] ACPI: bus type USB registered
[    6.472444] usbcore: registered new interface driver usbfs
[    6.472457] usbcore: registered new interface driver hub
[    6.472476] usbcore: registered new device driver usb
[    6.472823] PCI: Using ACPI for IRQ routing
[    6.498729] PCI: pci_cache_line_size set to 64 bytes
[    6.499297] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    6.499316] e820: reserve RAM buffer [mem 0xdbff0000-0xdbffffff]
[    6.499319] e820: reserve RAM buffer [mem 0x10ae00000-0x10bffffff]
[    6.499599] NetLabel: Initializing
[    6.499602] NetLabel:  domain hash size = 128
[    6.499603] NetLabel:  protocols = UNLABELED CIPSOv4
[    6.499624] NetLabel:  unlabeled traffic allowed by default
[    6.499855] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    6.499911] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    6.499918] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    6.508213] clocksource: Switched to clocksource kvm-clock
[    6.517846] AppArmor: AppArmor Filesystem Enabled
[    6.517921] pnp: PnP ACPI init
[    6.517992] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    6.518082] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[    6.518142] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    6.518229] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    6.518233] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    6.518474] system 00:04: [mem 0xdc000000-0xdfffffff] has been reserved
[    6.518479] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    6.518712] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    6.519413] pnp: PnP ACPI: found 6 devices
[    6.525539] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    6.525609] pci 0000:00:18.0: PCI bridge to [bus 01]
[    6.525723] pci 0000:00:19.0: PCI bridge to [bus 02]
[    6.525833] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    6.525834] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    6.525836] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    6.525838] pci_bus 0000:00: resource 7 [mem 0xdc000000-0xffdfffff window]
[    6.525840] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    6.525841] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    6.525843] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    6.525844] pci_bus 0000:01: resource 7 [mem 0xdc000000-0xffdfffff window]
[    6.525846] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    6.525848] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    6.525849] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    6.525851] pci_bus 0000:02: resource 7 [mem 0xdc000000-0xffdfffff window]
[    6.525887] NET: Registered protocol family 2
[    6.526070] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    6.526137] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    6.526191] TCP: Hash tables configured (established 32768 bind 32768)
[    6.526214] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    6.526228] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    6.526268] NET: Registered protocol family 1
[    6.526307] pci 0000:00:02.0: Video device with shadowed ROM
[    6.528769] PCI: CLS 0 bytes, default 64
[    6.528861] Trying to unpack rootfs image as initramfs...
[    6.902159] Freeing initrd memory: 19436K (ffff8800359fa000 - ffff880036cf5000)
[    6.902218] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    6.902221] software IO TLB [mem 0xd7ff0000-0xdbff0000] (64MB) mapped at [ffff8800d7ff0000-ffff8800dbfeffff]
[    6.902330] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer
[    6.902332] hw unit of domain pp0-core 2^-0 Joules
[    6.902333] hw unit of domain package 2^-0 Joules
[    6.902334] hw unit of domain pp1-gpu 2^-0 Joules
[    6.902392] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x0
[    6.902442] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.902521] Scanning for low memory corruption every 60 seconds
[    6.902799] futex hash table entries: 256 (order: 2, 16384 bytes)
[    6.902816] Initialise system trusted keyring
[    6.902837] audit: initializing netlink subsys (disabled)
[    6.902852] audit: type=2000 audit(1475144878.184:1): initialized
[    6.903152] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    6.904494] zpool: loaded
[    6.904497] zbud: loaded
[    6.904668] VFS: Disk quotas dquot_6.6.0
[    6.904698] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    6.906639] fuse init (API version 7.23)
[    6.906767] Key type big_key registered
[    6.906974] Key type asymmetric registered
[    6.906982] Asymmetric key parser 'x509' registered
[    6.906999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    6.907027] io scheduler noop registered
[    6.907030] io scheduler deadline registered (default)
[    6.907065] io scheduler cfq registered
[    6.907159] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.907165] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    6.907195] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    6.907196] vesafb: scrolling: redraw
[    6.907198] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    6.907208] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
[    6.907280] Console: switching to colour frame buffer device 80x30
[    6.907289] fb0: VESA VGA frame buffer device
[    6.907702] ACPI: AC Adapter [AC] (on-line)
[    6.907765] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    6.907769] ACPI: Power Button [PWRF]
[    6.907875] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[    6.907877] ACPI: Sleep Button [SLPF]
[    6.908054] GHES: HEST is not enabled!
[    6.909224] ACPI: Battery Slot [BAT0] (battery present)
[    6.909285] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    6.932391] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    6.936048] Linux agpgart interface v0.103
[    6.939617] brd: module loaded
[    6.940704] loop: module loaded
[    6.940976] ata_piix 0000:00:1f.1: version 2.13
[    6.941651] scsi host0: ata_piix
[    6.941745] scsi host1: ata_piix
[    6.941794] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[    6.941796] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[    6.941903] libphy: Fixed MDIO Bus: probed
[    6.941908] tun: Universal TUN/TAP device driver, 1.6
[    6.941909] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    6.942441] PPP generic driver version 2.4.2
[    6.942570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.942579] ehci-pci: EHCI PCI platform driver
[    6.943424] ehci-pci 0000:00:1f.5: EHCI Host Controller
[    6.943437] ehci-pci 0000:00:1f.5: new USB bus registered, assigned bus number 1
[    6.943807] ehci-pci 0000:00:1f.5: irq 23, io mem 0xf0903000
[    6.952831] ehci-pci 0000:00:1f.5: USB 2.0 started, EHCI 1.00
[    6.952895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.952897] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.952899] usb usb1: Product: EHCI Host Controller
[    6.952900] usb usb1: Manufacturer: Linux 4.2.0-27-generic ehci_hcd
[    6.952901] usb usb1: SerialNumber: 0000:00:1f.5
[    6.953033] hub 1-0:1.0: USB hub found
[    6.953039] hub 1-0:1.0: 12 ports detected
[    6.953269] ehci-platform: EHCI generic platform driver
[    6.953284] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.953289] ohci-pci: OHCI PCI platform driver
[    6.953818] ohci-pci 0000:00:1f.4: OHCI PCI host controller
[    6.953824] ohci-pci 0000:00:1f.4: new USB bus registered, assigned bus number 2
[    6.953860] ohci-pci 0000:00:1f.4: irq 23, io mem 0xf0902000
[    7.009598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    7.009601] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.009603] usb usb2: Product: OHCI PCI host controller
[    7.009605] usb usb2: Manufacturer: Linux 4.2.0-27-generic ohci_hcd
[    7.009606] usb usb2: SerialNumber: 0000:00:1f.4
[    7.009749] hub 2-0:1.0: USB hub found
[    7.009768] hub 2-0:1.0: 12 ports detected
[    7.010250] ohci-platform: OHCI generic platform driver
[    7.010266] uhci_hcd: USB Universal Host Controller Interface driver
[    7.010329] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    7.010849] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.010855] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.010972] mousedev: PS/2 mouse device common for all mice
[    7.011324] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    7.011861] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    7.011979] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[    7.011992] i2c /dev entries driver
[    7.012089] device-mapper: uevent: version 1.0.3
[    7.012157] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    7.012173] ledtrig-cpu: registered to indicate activity on CPUs
[    7.012251] PCCT header not found.
[    7.012443] NET: Registered protocol family 10
[    7.012690] NET: Registered protocol family 17
[    7.012700] Key type dns_resolver registered
[    7.012918] Loading compiled-in X.509 certificates
[    7.013804] Loaded X.509 cert 'Build time autogenerated kernel key: 736e2f9ea1b4728a15ac169b1869267e1128d6e8'
[    7.013821] registered taskstats version 1
[    7.013842] zswap: loading zswap
[    7.013845] zswap: using zbud pool
[    7.013849] zswap: using lzo compressor
[    7.015672] Key type trusted registered
[    7.018880] Key type encrypted registered
[    7.018887] AppArmor: AppArmor sha1 policy hashing enabled
[    7.018891] ima: No TPM chip found, activating TPM-bypass!
[    7.018914] evm: HMAC attrs: 0x1
[    7.019393]   Magic number: 0:185:478
[    7.019398] rtc rtc0: hash matches
[    7.019481] rtc_cmos 00:02: setting system clock to 2016-09-29 10:27:51 UTC (1475144871)
[    7.019545] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    7.019546] EDD information not available.
[    7.019592] PM: Hibernation image not present or could not be loaded.
[    7.100658] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[    7.101059] ata2.00: configured for UDMA/33
[    7.101515] scsi 1:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
[    7.102226] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[    7.102229] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.102338] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.102673] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    7.103576] Freeing unused kernel memory: 1468K (ffffffff81d38000 - ffffffff81ea7000)
[    7.103580] Write protecting the kernel read-only data: 12288k
[    7.103952] Freeing unused kernel memory: 240K (ffff8800017c4000 - ffff880001800000)
[    7.104137] Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000)
[    7.125162] systemd-udevd[99]: starting version 204
[    7.163000] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.163003] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.533846] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    7.597812] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:45:cf:f3
[    7.597820] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    7.597904] ahci 0000:00:1f.2: version 3.0
[    7.598588] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    7.598765] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    7.598767] ahci 0000:00:1f.2: flags: 64bit ncq stag only ccc 
[    7.603033] scsi host2: ahci
[    7.603184] ata3: SATA max UDMA/133 abar m8192@0xf0900000 port 0xf0900100 irq 24
[    7.740597] usb 2-1: new full-speed USB device number 2 using ohci-pci
[    7.900733] tsc: Refined TSC clocksource calibration: 1994.982 MHz
[    7.900741] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3983545a8c0, max_idle_ns: 881590803241 ns
[    7.920885] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.921208] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[    7.921213] ata3.00: 31169232 sectors, multi 128: LBA48 NCQ (depth 31/32)
[    7.921891] ata3.00: configured for UDMA/133
[    7.922092] scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
[    7.922550] sd 2:0:0:0: [sda] 31169232 512-byte logical blocks: (15.9 GB/14.8 GiB)
[    7.922639] sd 2:0:0:0: [sda] Write Protect is off
[    7.922644] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.922682] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.923126] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    7.924462]  sda: sda1 sda2 < sda5 >
[    7.924883] sd 2:0:0:0: [sda] Attached SCSI disk
[    8.005973] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.014567] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[    8.014571] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    8.014573] usb 2-1: Product: USB Tablet
[    8.014574] usb 2-1: Manufacturer: VirtualBox
[    8.225107] usb 2-2: new full-speed USB device number 3 using ohci-pci
[    8.535620] usb 2-2: New USB device found, idVendor=046d, idProduct=c29b
[    8.535624] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    8.535626] usb 2-2: Product: G27 Racing Wheel
[    8.777048] usb 2-3: new full-speed USB device number 4 using ohci-pci
[    9.080121] usb 2-3: New USB device found, idVendor=054c, idProduct=05c4
[    9.080125] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.080127] usb 2-3: Product: Wireless Controller
[    9.080128] usb 2-3: Manufacturer: Sony Computer Entertainment
[    9.292715] usb 2-4: new full-speed USB device number 5 using ohci-pci
[    9.613522] usb 2-4: New USB device found, idVendor=10c4, idProduct=ea60
[    9.613525] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.613527] usb 2-4: Product: CP2102 USB to UART Bridge Controller
[    9.613529] usb 2-4: Manufacturer: Silicon Labs
[    9.613530] usb 2-4: SerialNumber: 0001
[   10.172408] floppy0: no floppy controllers found
[   10.172544] work still pending
[   10.304457] random: init urandom read with 43 bits of entropy available
[   10.352575] init: plymouth-upstart-bridge main process (151) terminated with status 1
[   10.352586] init: plymouth-upstart-bridge main process ended, respawning
[   10.371462] init: plymouth-upstart-bridge main process (161) terminated with status 1
[   10.371478] init: plymouth-upstart-bridge main process ended, respawning
[   10.383721] init: plymouth-upstart-bridge main process (164) terminated with status 1
[   10.383733] init: plymouth-upstart-bridge main process ended, respawning
[   11.688311] Adding 3780604k swap on /dev/sda5.  Priority:-1 extents:1 across:3780604k FS
[   11.697529] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.891177] systemd-udevd[300]: starting version 204
[   12.038521] lp: driver loaded but no devices found
[   12.064006] ppdev: user-space parallel port driver
[   12.140673] vboxguest: module verification failed: signature and/or required key missing - tainting kernel
[   12.229398] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[   12.246455] intel_rng: FWH not detected
[   12.252934] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[   12.298654] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input5
[   12.298888] vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[   12.298891] vboxguest: Successfully loaded version 5.0.26 (interface 0x00010004)
[   12.300008] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
[   12.346038] leds_ss4200: no LED devices found
[   12.362292] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   12.362417] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
[   12.420632] random: nonblocking pool is initialized
[   12.437671] Bluetooth: Core ver 2.20
[   12.437709] NET: Registered protocol family 31
[   12.437711] Bluetooth: HCI device and connection manager initialized
[   12.437715] Bluetooth: HCI socket layer initialized
[   12.437717] Bluetooth: L2CAP socket layer initialized
[   12.437723] Bluetooth: SCO socket layer initialized
[   12.446697] audit: type=1400 audit(1475144876.921:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=443 comm="apparmor_parser"
[   12.446704] audit: type=1400 audit(1475144876.921:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[   12.446708] audit: type=1400 audit(1475144876.921:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[   12.447095] audit: type=1400 audit(1475144876.921:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[   12.447100] audit: type=1400 audit(1475144876.921:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[   12.447308] audit: type=1400 audit(1475144876.921:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[   12.473162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.473165] Bluetooth: BNEP filters: protocol multicast
[   12.473169] Bluetooth: BNEP socket layer initialized
[   12.476312] Bluetooth: RFCOMM TTY layer initialized
[   12.476317] Bluetooth: RFCOMM socket layer initialized
[   12.476323] Bluetooth: RFCOMM ver 1.11
[   12.631239] audit: type=1400 audit(1475144877.105:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=469 comm="apparmor_parser"
[   12.631246] audit: type=1400 audit(1475144877.105:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=469 comm="apparmor_parser"
[   12.631601] audit: type=1400 audit(1475144877.105:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=469 comm="apparmor_parser"
[   12.671765] [drm] Initialized drm 1.1.0 20060810
[   12.945099] hidraw: raw HID events driver (C) Jiri Kosina
[   12.958723] usbcore: registered new interface driver usbserial
[   12.958751] usbcore: registered new interface driver usbserial_generic
[   12.958776] usbserial: USB Serial support registered for generic
[   12.961968] usbcore: registered new interface driver cp210x
[   12.962162] usbserial: USB Serial support registered for cp210x
[   12.962182] cp210x 2-4:1.0: cp210x converter detected
[   12.962313] [drm] VRAM 00c00000
[   12.962574] usb 2-4: cp210x converter now attached to ttyUSB0
[   12.967988] [TTM] Zone  kernel: Available graphics memory: 1819928 kiB
[   12.967991] [TTM] Initializing pool allocator
[   12.967996] [TTM] Initializing DMA pool allocator
[   12.969423] checking generic (e0000000 130000) vs hw (e0000000 1000000)
[   12.969425] fb: switching to vboxdrmfb from VESA VGA
[   12.969466] Console: switching to colour dummy device 80x25
[   12.969753] fbcon: vboxdrmfb (fb0) is primary device
[   12.969844] Console: switching to colour frame buffer device 100x37
[   12.969857] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[   12.969859] vboxvideo 0000:00:02.0: registered panic notifier
[   12.969862] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[   13.001853] usbcore: registered new interface driver usbhid
[   13.001856] usbhid: USB HID core driver
[   13.177162] AVX version of gcm_enc/dec engaged.
[   13.177166] AES CTR mode by8 optimization enabled
[   13.242582] audit: type=1400 audit(1475144877.717:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=540 comm="apparmor_parser"
[   13.515976] intel_rapl: no valid rapl domains found in package 0
[   13.558573] init: failsafe main process (573) killed by TERM signal
[   14.004540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.005265] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   14.005617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.009774] snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
[   14.250967] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:1f.4/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input7
[   14.252967] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:1f.4-1/input0
[   14.372582] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-2/2-2:1.0/0003:046D:C29B.0002/input/input8
[   14.373103] logitech 0003:046D:C29B.0002: input,hidraw1: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-2/input0
[   14.377164] logitech 0003:046D:C29B.0002: Force feedback support for Logitech Gaming Wheels
[   14.540628] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[   14.596724] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:054C:05C4.0003/input/input9
[   14.597088] sony 0003:054C:05C4.0003: input,hidraw2: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-3/input0
[   15.520763] floppy0: no floppy controllers found
[   15.520818] work still pending
[   16.243463] vboxsf: Successfully loaded version 5.0.26 (interface 0x00010004)
[   16.320947] init: plymouth-upstart-bridge main process ended, respawning
[   16.340350] init: plymouth-upstart-bridge main process ended, respawning
[   19.421850] VBoxService 5.0.26 r108824 (verbosity: 0) linux.amd64 (Jul 18 2016 13:51:44) release log
[   19.421850] 00:00:00.000115 main     Log opened 2016-09-29T10:28:03.902290000Z
[   19.421916] 00:00:00.000223 main     OS Product: Linux
[   19.421951] 00:00:00.000264 main     OS Release: 4.2.0-27-generic
[   19.421985] 00:00:00.000298 main     OS Version: #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016
[   19.422028] 00:00:00.000332 main     Executable: /opt/VBoxGuestAdditions-5.0.26/sbin/VBoxService
[   19.422028] 00:00:00.000333 main     Process ID: 1823
[   19.422028] 00:00:00.000334 main     Package type: LINUX_64BITS_GENERIC
[   19.431284] 00:00:00.009566 main     5.0.26 r108824 started. Verbose level = 0
[   19.451988] 00:00:00.030268 automount vbsvcAutoMountWorker: Shared folder 'tiagovaz' was mounted to '/media/sf_tiagovaz'
[   19.789354] init: plymouth-stop pre-start process (1892) terminated with status 1
[   21.446452] ISO 9660 Extensions: Microsoft Joliet Level 3
[   21.458827] ISO 9660 Extensions: RRIP_1991A
[   81.151953] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-2/2-2:1.0/0003:046D:C29B.0004/input/input10
[   81.152172] logitech 0003:046D:C29B.0004: input,hidraw1: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-2/input0
[   81.152264] logitech 0003:046D:C29B.0004: Force feedback support for Logitech Gaming Wheels
[   81.402599] usb 2-3: reset full-speed USB device number 4 using ohci-pci
[   81.740250] input: G27 Racing Wheel as /devices/virtual/misc/uhid/0006:046D:C29B.0005/input/input11
[   81.740449] hid-generic 0006:046D:C29B.0005: input,hidraw1: <UNKNOWN> HID v1.11 Multi-Axis Controller [G27 Racing Wheel] on 
[  156.041268] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-2/2-2:1.0/0003:046D:C29B.0006/input/input12
[  156.041437] logitech 0003:046D:C29B.0006: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-2/input0
[  156.041525] logitech 0003:046D:C29B.0006: Force feedback support for Logitech Gaming Wheels
[  156.057383] cp210x ttyUSB0: usb_serial_generic_write_bulk_callback - urb stopped: -32
[  156.206082] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:054C:05C4.0007/input/input13
[  156.206202] sony 0003:054C:05C4.0007: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-3/input0

Posted: **Thu Sep 29, 2016 12:10 pm**

It looks like there is a hardware issue. Check the USB cables. Also try changing the USB port.

Game Input MultipleXer

Ubuntu 14.04 GIMX 5.9 g27 f1 2016

Ubuntu 14.04 GIMX 5.9 g27 f1 2016

Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016

Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016

Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016

Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016

Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016