hi help me

Need help? Ask here and someone will help
Post Reply
nach09
Posts: 7
Joined: Sun Oct 31, 2021 4:04 am

hi help me

Post by nach09 »

Hello
I have a problem starting GIMX
It appears to me "Failed to read packet header from gimx adapter"
User avatar
GoDlike
Posts: 1317
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: hi help me

Post by GoDlike »

Please check the cables.

Also please post the log file - viewtopic.php?t=691
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
nach09
Posts: 7
Joined: Sun Oct 31, 2021 4:04 am

Re: hi help me

Post by nach09 »

Could it be that it is not useful to have the cables connected without soldering?
sorry if it is not understood, is that my language is Spanish
Image
Image
https://ibb.co/CKY9q2Y
https://ibb.co/kKnpV15
User avatar
ckaiycool
Posts: 468
Joined: Thu Jul 10, 2014 8:16 pm
Location: Sweden

Re: hi help me

Post by ckaiycool »

Test tx to rx and rx to tx between the microcontroller and uart.
If that does not work rx to rx and tx to tx.
Looking at the switch option you need to switch the black switch to left position and 1/2 switch to lower position as it is shown on picture 4 Image
Last edited by ckaiycool on Sat Nov 06, 2021 7:32 pm, edited 1 time in total.
nach09
Posts: 7
Joined: Sun Oct 31, 2021 4:04 am

Re: hi help me

Post by nach09 »

If I was able to load the hex file with GIMX-LOADER, is it because it recognizes the adapter that I made?

this is the CP2102 i'm using
https://articulo.mercadolibre.com.ar/ML ... -3v-5v-_JM
User avatar
ckaiycool
Posts: 468
Joined: Thu Jul 10, 2014 8:16 pm
Location: Sweden

Re: hi help me

Post by ckaiycool »

Check the picture i linked and set it to the 4 option and see if that works.
nach09
Posts: 7
Joined: Sun Oct 31, 2021 4:04 am

Re: hi help me

Post by nach09 »

I have already configured it like this in the fourth image
but it would be necessary to try the thing from rx to rx and tx to tx
nach09
Posts: 7
Joined: Sun Oct 31, 2021 4:04 am

Re: hi help me

Post by nach09 »

nach09
Posts: 7
Joined: Sun Oct 31, 2021 4:04 am

Re: hi help me

Post by nach09 »

thanks, i just had to do this
https://ibb.co/n0ZdCjz
User avatar
ckaiycool
Posts: 468
Joined: Thu Jul 10, 2014 8:16 pm
Location: Sweden

Re: hi help me

Post by ckaiycool »

Well done :D
Post Reply