Invalid Length XONE

Need help? Ask here and someone will help
Post Reply
smeaglesmeagle
Posts: 2
Joined: Mon Feb 19, 2024 7:15 pm

Invalid Length XONE

Post by smeaglesmeagle »

Hello I am using a raspberry pi on Ubuntu 22.04 with a self compiled version of GIMX.

I am using a Leonardo Arduino as my custom GIMX device and I have an older(no BT or 3.5mm) XONE controller with latest firmware version for it(2.3.2385.0).

I am using a custom config for my Ion Rocker drumset.

I seem to be getting an error which is due to invalid length from the GIMX device.

Code: Select all

mike@mike-gimx:~$ sudo /usr/bin/gimx -p /dev/ttyAMA0 -c ~/.gimx/config/IonRocker.xml
controller #1: option -p with value `/dev/ttyAMA0'
now reading arguments for controller #2
global option -c with value `/home/mike/.gimx/config/IonRocker.xml'
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
Error: bad response from the GIMX adapter (invalid length)
I tried re flashing the Leonardo using the GIMX update tool which was successful but does not solve the problem.

Here are a few pictures of my setup/wiring

https://imgur.com/a/ox7bEKY


EDIT: It was my wiring. Figured it out!
Post Reply