echec de la detection de l adapteur usb failed to read firmware type

La section où l'on parle français !
Post Reply
flo
Posts: 5
Joined: Mon Jun 22, 2020 7:55 pm

echec de la detection de l adapteur usb failed to read firmware type

Post by flo »

bonjour
failed to read packet header from the gimx adapter

echec de la detection de l adapteur

connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding

failed to read firmware type

il marcher bien et d'un coup plus rien merci:

User avatar
LoneWolf81
Posts: 119
Joined: Sat Jun 15, 2019 11:49 am
Location: South Africa

Re: echec de la detection de l adapteur usb failed to read firmware type

Post by LoneWolf81 »

Hi

Please post a log file.

Also please tell us if its a new adapter and if it was bought or self made, on what OS are ou using it and also the version of GIMX
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX :D .

flo
Posts: 5
Joined: Mon Jun 22, 2020 7:55 pm

Re: echec de la detection de l adapteur usb failed to read firmware type

Post by flo »

Bonjour
On la acheter sur votre site il y a 1 semaine
Je suis sur Windows 10 et j'ai installer la version 8
Et quesque un fichier journal?
Merci

User avatar
LoneWolf81
Posts: 119
Joined: Sat Jun 15, 2019 11:49 am
Location: South Africa

Re: echec de la detection de l adapteur usb failed to read firmware type

Post by LoneWolf81 »

To make a log file open GIMX and set the messages option to log file then click start afterwards stop GIMX (if the error is severe it will stop by itself), it will generate a new file that you can copy it to pastebin and post the link here.

I am not french speaking had to use translate but if you prefer to be helped in french I can move your topic to the appropriate section
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX :D .

flo
Posts: 5
Joined: Mon Jun 22, 2020 7:55 pm

Re: echec de la detection de l adapteur usb failed to read firmware type

Post by flo »

voila la seul chose que j'arrive a sortir de gimx


option globale -l avec valeur `log.txt'
option globale -c avec valeur `LogitechDrivingForceGT_G29.xml'
contrôleur 1 : option -p avec valeur `COM4'
début des arguments du contrôleur 2
le flag "status" est positionné
le flag "subpos" est positionné
le flag "force_updates" est positionné
le flag auto-grab est positionné
GIMX 8.0 i386
Windows 10 (or later) x86
Kernel version: 10.0 (17134)
adaptateur GIMX détecté, le type de contrôleur est : G29 PS4.
Firmware version: 5.8
Reset envoyé à l'adaptateur GIMX.
périphérique de pass-through : 0x054c:0x05c4
rounding timer period 1000us to 999us
registered joystick 0 with name "PS4 Controller"
utilisation de la période de rafraîchissement par défaut : 5.00ms
mouse 0 has name 'Souris HID' and virtual id 0
mouse 1 has name 'Synaptics PS/2 Port TouchPad' and virtual id 0
mouse 2 has name 'Souris HID' and virtual id 1
keyboard 0 has name 'Périphérique clavier PIH' and virtual id 0
keyboard 1 has name 'Clavier standard PS/2' and virtual id 0
keyboard 2 has name 'Clavier 109 MCIR Microsoft eHome' and virtual id 0
keyboard 3 has name 'Clavier MCIR Microsoft eHome' and virtual id 0
keyboard 4 has name 'Touches de clavier de contrôle à distance Microsoft eHome' and virtual id 0
joystick 0 has name 'PS4 Controller' and virtual id 0
joystick 1 has name 'Logitech Driving Force GT USB' and virtual id 0
Dump of C:\Users\HP\AppData\Roaming/gimx/config/LogitechDrivingForceGT_G29.xml:
<?xml version="1.0" encoding="UTF-8"?>

j'ai fait le test avec Arduino ide aucun résultat
je vous donne ceci si vous arriver pas je veux bien être rediriger si cela ne vous dérange pas merci bonne journée

flo
Posts: 5
Joined: Mon Jun 22, 2020 7:55 pm

Re: echec de la detection de l adapteur usb failed to read firmware type

Post by flo »

Error: failed to read packet header from the GIMX adapter
src/windows/gprio.c:376 unsetprocessaffinities: SetProcessAffinityMask failed with error: Accès refusé.

maintenant il marque ceci

User avatar
LoneWolf81
Posts: 119
Joined: Sat Jun 15, 2019 11:49 am
Location: South Africa

Re: echec de la detection de l adapteur usb failed to read firmware type

Post by LoneWolf81 »

The firmware needs to be updated to 8.0 I have moved your topic to the french section so you can be better assisted in your native language.

I can give you the instructions but I ask if you do not understand please wait for the instructions in french.

You have to plug both sides of the adapter into the computer, select the firmware you want to program and when it asks you to unplug and re-plug the adapter you have to unplug the CABLE side (Normally connected to PS4) You only have 10 seconds to do this. It should then successfully update.
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX :D .

flo
Posts: 5
Joined: Mon Jun 22, 2020 7:55 pm

Re: echec de la detection de l adapteur usb failed to read firmware type

Post by flo »

C'est bon ça remarche!!!!!!
Je vous remercie d'avoir fait les efforts de la langue c'est vraiment sympa vous êtes au top 😀😀
Merci beaucoup

User avatar
LoneWolf81
Posts: 119
Joined: Sat Jun 15, 2019 11:49 am
Location: South Africa

Re: echec de la detection de l adapteur usb failed to read firmware type

Post by LoneWolf81 »

Awesome glad I could help :)
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX :D .

Post Reply