RPi2 + Teensy++ 2.0 without CP2102
Re: RPi2 + Teensy++ 2.0 without CP2102
Sadly there is a problem with at90usb162 boards: https://github.com/matlo/GIMX/issues/367
GIMX creator
Re: RPi2 + Teensy++ 2.0 without CP2102
Ok, thank you very much. It was driving me crazy ![Surprised :o](./images/smilies/icon_e_surprised.gif)
![Surprised :o](./images/smilies/icon_e_surprised.gif)
Re: RPi2 + Teensy++ 2.0 without CP2102
I'm trying to use a arduino uno rev3, but I can't find firmware for atmega16u2.. where I can find the hex ?Matlo wrote:Sadly there is a problem with at90usb162 boards: https://github.com/matlo/GIMX/issues/367
EDIT:
I removed the atmega328 from arduino, recompiled myself the firmware for atmega16u2 and flashed the firmware, now the board is recognised by gimx but the PS4 still not receive any input..
![Mad :x](./images/smilies/icon_mad.gif)
Code: Select all
pi@raspberrypi:~ $ gimx -c LogitechG25_G29.xml -p /dev/ttyUSB0 --status
option -c with value `LogitechG25_G29.xml'
option -p with value `/dev/ttyUSB0'
status flag is set
native mode command sent to HID device 01:01:03:01 (PID=c294)
native mode enabled for HID device 01:01:03:01 (PID=c299)
Detected USB adapter: G29 PS4.
using default refresh period: 5.00ms
macros are not available for: joystick Sony Computer Entertainment Wireless Controller (0)
closing unused uhid joysticks... done
0 1455131514.804965
0 1455131517.751960, PS (255)
Re: RPi2 + Teensy++ 2.0 without CP2102
This is probably the same issue as the atmega16u2 is an optimized version of the at90usb162 ![Sad :(](./images/smilies/icon_e_sad.gif)
![Sad :(](./images/smilies/icon_e_sad.gif)
GIMX creator