Anyone else seen this kind of behavior?
Long start time before Gimx starts?
Using LED and /home/pi/blink.py to notify when GIMX starts.
The led comes on for 3-4 seconds and turns off again, happens about 5/6 times.
Sometimes unplugging / plugin the G27 or DS4 will make it work.
Sometimes it just starts fine.
PS4 - RPi - G27
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: PS4 - RPi - G27
Hi Dom,
Which image you use on your Rp? Is it confirmed working good?
Which image you use on your Rp? Is it confirmed working good?
PS4 enthusiast.
-
- Posts: 9
- Joined: Wed Apr 18, 2018 10:24 am
Re: PS4 - RPi - G27
Using preconfigured image from Tutorial by: Rudi Rastelli
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: PS4 - RPi - G27
Can you try this prebuilt image, it worked good for me (using a Momo racing)
PS4 enthusiast.
-
- Posts: 9
- Joined: Wed Apr 18, 2018 10:24 am
Re: PS4 - RPi - G27
Think my problem might be start time?
If i just wait it seems to be working after 4-5minutes.
Does this sound normal?
Could it be my SD Card?
If i just wait it seems to be working after 4-5minutes.
Does this sound normal?
Could it be my SD Card?
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
-
- Posts: 9
- Joined: Wed Apr 18, 2018 10:24 am
Re: PS4 - RPi - G27
I can see the GIMX service start / stop about 3-4 times.
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: PS4 - RPi - G27
Use this command to check status.
Then you can recheck gimx.service script again, use
You can also stop gimx service and use gimx with graphical interface. So we can make sure what reason is.
Code: Select all
sudo systemctl status gimx.service
Code: Select all
nano /etc/systemd/system/gimx.service
PS4 enthusiast.